Looking for 2.4ghz Receiver Radiomaster? RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano Receiver is available at Zbotic with fast shipping across India.
RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano Receiver:
The RadioMaster RP series receivers are built-in a TCXO (temperature-compensated crystal oscillator) now, which ensures reliable, stable, and accurate signal reception, allowing for superior performance in demanding environments and enhancing the flight experience.
The RP1 and RP2 2.4GHz ELRS nano series receivers are open-source receivers based on ExpressLRS. The Nano receivers, first developed by Jye Smith from the ExpressLRS development team, feature ESP8285 MCU and SX1280 RF chip. The RP1 has a UFL antenna socket for full-range antenna use. The RP2 has a built-in ceramic antenna which is super light and small in size and ideal for racing.
The RP1 and RP2 feature WIFI built in so you can upgrade firmware by WIFI and configure the Receiver via the built-in WebUI with your PC or mobile phone.
Due to the low-latency and high-refresh-rate RF module, the RP1 and RP2 are ideal for FPV races or Long Range. Suitable for many models due to the ultra-light and Nano size, these receivers can fit just about anywhere!
Features:
- Improved PCB design is better for heat dissipation.
- LED on the top side of PCB.
- Solder pads are improved and easier to solder to.
- Built-in a TCXO (temperature compensated crystal oscillator)
- Compatible with all 2.4GHz ExpressLRS modules and transmitters with built in 2.4GHz ExpressLRS
- Firmware Version: ExpressLRS v2.4 pre-installed
- FW Target: RadioMaster RP1/2 2400 RX
- Maximum receive refresh rate: 500Hz/F1000Hz
- Minimum receiver refresh rate: 25Hz
Specification
| Item Type: | Receiver |
|---|---|
| Frequency (GHz): | 2.4 |
| MCU Type | EPS8285 |
| Antenna Type: | On Board SMT Antenna |
| Operating Voltage (V): | 5V |
| Interface: | CRSF |
| Length (mm): | 13 |
| Width (mm): | 11 |
| Height (mm): | 7 |
| Weight (g): | 0.55g (On Board antenna) |
Package Includes:
1 x RP2 ExpressLRS 2.4ghz Nano Receiver
1 x User Manual
1 x CRSF wire
RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano Receiver Overview
The RadioMaster RP2 V2 ExpressLRS 2.4 GHz Nano Receiver is a compact ISM-band RX designed for FPV drones and RC models that demand ultra-low latency and reliable links. Featuring an ESP8285 MCU, SX1281 RF chip and integrated TCXO, it delivers stable signal reception in challenging flight conditions.
Key Features of RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano Receiver
- ExpressLRS Open-Source: Fully compatible with ExpressLRS firmware for precise, low-latency control.
- SEMTECH SX1281 RF Chip: High-performance transceiver covering 2.404–2.479 GHz with clean signal handling.
- ESP8285 MCU & TCXO: Temperature-compensated oscillator ensures consistent frequency stability.
- On-Board SMT Antenna: Integrated ceramic antenna for a sleek nano form factor without external mounts.
- 10 mW Telemetry Power: Bidirectional link supports real-time telemetry data back to the transmitter.
- Fast Shipping from Zbotic: Genuine stock shipped within 24 hours across India.
Applications and Use Cases
- FPV racing quads and micro drones where minimal size and weight matter.
- Freestyle and long-range drones leveraging ExpressLRS reliability.
- Indoor micro drone builds in tight spaces.
- RC airplanes and multirotors requiring real-time telemetry.
- Custom DIY drone projects using open-source control protocols.
How to Use RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano Receiver
Wire the RP2 V2’s signal, 5 V power (from your flight controller BEC) and ground pins to your FC, then press the onboard bind button until the LED flashes. Launch the ExpressLRS Lua binding script on your compatible transmitter, wait for the LED to turn solid, and secure the nano receiver in your frame using foam tape or zip ties.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
How do I bind the RadioMaster RP2 V2 to my ExpressLRS transmitter?
Press and hold the bind button on the receiver until the LED flashes, then run the ExpressLRS binding script on your transmitter. The LED will turn solid once binding is complete, indicating a successful link.
What frequency range does the RP2 V2 Nano Receiver support?
The RP2 V2 operates within the 2.404–2.479 GHz ISM band, fully compatible with standard 2.4 GHz ExpressLRS modules and transmitters.
Does the RP2 V2 include an external antenna or built-in antenna?
The RP2 V2 features an integrated ceramic SMT antenna for a compact nano design without the need for an external antenna.
Drone Delivery System: Payload Release Mechanism
Table of Contents Understanding Drone Delivery System Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation Practical...
Read More →
Drone Parachute System: How It Works & When You Need One
Drone Parachute System: How It Works & When You Need One As drones grow heavier, fly higher, and...
Read More →
Drone Regulations India 2026: DGCA Rules for Hobbyists
Drone Regulations India 2026: Complete DGCA Rules Guide for Hobbyists Flying a drone in India in 2026 is...
Read More →Technical Specifications
| Brand | Radiomaster |
|---|---|
| Model | RP2 |
| Interface / Protocol | 4G |
| Frequency | 2.4ghz |
| SKU | AI6883 |
| Weight | 0.01 kg |
| Availability | In Stock |
Applications & Use Cases
The RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano Receiver is a versatile drone transmitter and receiver used across a wide range of applications including FPV drone control, RC aircraft, ground vehicles, and long-range drone operations.
Common use cases:
- Setting up a new FPV quad with digital link
- Replacing a receiver after a crash
- Building a long-range fixed-wing aircraft
This product is ideal for FPV pilots, RC hobbyists, and drone builders.
Technical Tip: ELRS (ExpressLRS) offers excellent range and low latency at 2.4GHz. Ensure your transmitter and receiver use the same protocol.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Radiomaster product sourced from authorized channels
Parth Negi (verified owner) –
Perfect for my agriculture drone project. This RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano handles the weight effortlessly.
Abhishek Mishra (verified owner) –
Very impressed with this RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano. My drone’s performance improved noticeably.
Daksh Jain (verified owner) –
Excellent RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Rashmi Khurana (verified owner) –
Amazing build quality! This RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano is sturdy and lightweight at the same time.
Zubin Bose (verified owner) –
Very good quality RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano. I’ve been building drones for 2 years now and this is one of the best I’ve used.
Jatin Patil –
Very good quality RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano. I’ve been building drones for 2 years now and this is one of the best I’ve used.
Yash Sharma (verified owner) –
Nice RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano, does the job. Delivery took a couple of extra days but product is solid.
Deepak Desai –
Nice RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano, does the job. Delivery took a couple of extra days but product is solid.
Deepika Chopra (verified owner) –
Been using this RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano for 3 months now, zero issues. Great product.
Sakshi Kohli –
Good product overall. My drone is flying well with this RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano. Satisfied with the purchase.
Arnav Negi (verified owner) –
Outstanding RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano! Installed it on my racing quad and the performance is amazing.
Isha Kohli –
Received the RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano in great condition. Testing done, everything works perfectly.
Vidya Thakur (verified owner) –
Using this RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano in my hexacopter. Smooth operation and excellent thrust.
Simran Rao –
This RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano is exactly what I needed for my drone. Works perfectly, very reliable.
Bharat Deshpande (verified owner) –
Decent RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano. Took some effort to set up but working now.
Chitra Chatterjee (verified owner) –
Pretty good RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano. Works as expected for my drone project. Would buy again.
Himanshu Desai (verified owner) –
My 5th order from Zbotic. This RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano is excellent as always. Totally reliable store.
Gauri Chatterjee (verified owner) –
Average RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano. Works fine but expected slightly better quality at this price.
Vijay Chopra (verified owner) –
This RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano is exactly what I needed for my drone. Works perfectly, very reliable.
Zubin Shetty (verified owner) –
Good quality RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano. Minor scratches on arrival but functionally perfect.
Karan Dubey –
This RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano exceeded my expectations. Installed it yesterday and took a successful test flight today.
Nakul Shah –
Using this RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano in my FPV drone build. Quality is top notch. Very happy with the purchase.
Kabir Dhillon (verified owner) –
Perfect for my agriculture drone project. This RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano handles the weight effortlessly.
Zubin Desai (verified owner) –
Amazing build quality! This RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano is sturdy and lightweight at the same time.
Sunil Kohli (verified owner) –
Good RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano. Works well for my drone build. Packaging could be slightly better.
Sachin Bhandari (verified owner) –
Excellent RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Girish Tandon –
Superb RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano! Built my first drone with this and it performed beyond expectations.
Kritika Kulkarni (verified owner) –
Bought this for my college drone project. Works great, professor was impressed!
Aisha Gill (verified owner) –
Using this RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano in my hexacopter. Smooth operation and excellent thrust.
Arnav Dhillon (verified owner) –
Great RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano for beginners and professionals alike. Highly recommended for drone enthusiasts.
Sahil Rao (verified owner) –
My 5th order from Zbotic. This RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano is excellent as always. Totally reliable store.
Zara Bose (verified owner) –
Excellent product for the price. My drone flies smoothly with this RadioMaster RP2 V2 ExpressLRS 2.4ghz Nano. Highly recommended!