Building on the FlySky iA6B receiver, FlySky now introduces the 10-channel FlySky FS-IA10B Radio Receiver. Like the FS-iA6B, the iA10B supports iBUS, SBUS, PPM, and PWM for enhanced control.
The advantage of PPM/SBUS over traditional PWM channels is the reduction to a single signal wire, simplifying wiring for PPM-compatible flight controllers like the Naze32. Additionally, with optional telemetry sensors, the receiver can monitor flight battery voltage and even motor RPM.
Designed as a full 10-channel receiver, the FS-IA10B is versatile enough for various model types and is considered “full range,” suitable for both larger and smaller models. Its dual antennas provide exceptional reception, with reported ranges exceeding 1km, and excellent interference rejection. For optimal performance, position the antennas at a 90-degree angle to each other.
While the FS-IA10B is slightly larger than the FS-iA6B, it remains compact and features end-on connectors for neat installations in tight spaces.
Binding the RX (Receiver) to the TX (Transmitter):
1. Insert the bind plug into the BAT port and power on the plane or helicopter; the LED should start flashing (ensure the RX is powered via the ESC).
2. Press and hold the bind button on the transmitter module while turning on the TX. The light should become steady.
3. Release the bind button, power off the plane or helicopter, remove the bind plug, and then turn off the TX.
4. Finally, turn on the TX followed by the plane or helicopter.
Compatible Radios:
- Flysky i4
- Flysky / Turnigy i6
- Flysky / Turnigy i10
- Flysky FS-i10
- FS-GT2E
- FS-GT2G
Note:Â
If you want to use PPM, remember to enable the setting on your transmitter.
Features:
- Reliable, interference-free 2.4GHz AFHDS 2A signal operation
- Compact, lightweight design
- Dual antennas for reliable, interference-free operation
- Connection ports for use with optional telemetry sensors
Package Includes:
1 x FlySky FS-IA10B Radio Receiver
1 x Bind Plug
Video
Reviews
There are no reviews yet.