Digi XBee3 2.4GHz ZB3.0 PCB Antenna

Digi XBee3 2.4GHz ZB3.0 PCB Antenna

Digi XBee3 modules are pre-certified wireless devices that enable developers, OEMs, and solution providers to quickly add wireless connectivity and functionality to their products. Leveraging cutting-edge technology, these modules offer the flexibility to switch between various frequencies and wireless protocols as needed. The module is equipped with a 2.4GHz ZB3.0 PCB antenna and a TH MT connector, simplifying integration into your designs.

Features

1. Serial Data Interface: Uart, Spi, I2c
2. Configuration Method: API Or at Commands, Local Or Over-the-air (Ota)
3. Frequency Band: ISM 2.4 GHz
4. Form Factor: Micro, Through-hole, Surface Mount
5. Interference: Immunity Dsss (Direct Sequence Spread Spectrum)
6. Adc Inputs: (4) 10-bit Adc Inputs
7. Digital I/o: 15
8. Antenna Options:
   1. Through-hole: Pcb Antenna, U.fl Connector, RP-SMA Connector
   2. Smt: Rf Pad, Pcb Antenna, Or U.fl Connector
   3. Micro: U.fl Antenna, Rf Pad, Chip Antenna
9. Operating Temperature -40º C To +85º C

Specification-

Package Includes

• 1 x Digi XBee3 2.4GHz ZB3.0 PCB Antenna.

Datasheet

Digi XBee3 2.4GHz ZB3.0 PCB Antenna Overview

The Digi XBee3 2.4GHz ZB3.0 PCB Antenna is a pre-certified Zigbee 3.0 radio module featuring an onboard 2.4 GHz PCB antenna and TH MT connector. Designed for rapid integration into wireless mesh networks, it enables developers to add robust IEEE 802.15.4 connectivity to their products.

Key Features of Digi XBee3 2.4GHz ZB3.0 PCB Antenna

• Pre-certified Zigbee 3.0 module with built-in 2.4 GHz PCB antenna and TH MT connector
• UART, SPI and I2C serial interfaces for versatile data communication
• Configurable via API or AT commands locally or over-the-air (OTA)
• Micro form factor supporting through-hole and surface-mount PCB layouts
• Four 10-bit ADC inputs and 15 digital I/O pins for sensor and control applications
• DSSS interference immunity for reliable performance, plus genuine product with fast shipping from Zbotic

Applications and Use Cases

• Smart home mesh networks connecting lighting controls, switches and environmental sensors
• Industrial automation for monitoring equipment health and process parameters
• Agricultural deployments tracking soil moisture, temperature and humidity wirelessly
• Building management systems integrating HVAC, security and energy-monitoring devices
• Warehouse asset tracking and inventory management via mesh-enabled nodes

How to Use Digi XBee3 2.4GHz ZB3.0 PCB Antenna

Mount the XBee3 module onto your PCB using the through-hole pads or by soldering its surface-mount contacts. Provide a 3.3 V power supply, connect ground, and wire your host MCU to the UART, SPI or I2C pins. Use Digi’s XCTU software or host-driven API/AT commands to set PAN ID, channel and network parameters, then deploy modules to form or join a Zigbee mesh.

Why Buy from Zbotic?

• Genuine Products: All items sourced from authorized distributors
• Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
• Free Shipping: Free delivery on qualifying orders
• COD Available: Cash on Delivery, UPI, cards, net banking
• Technical Support: Expert help for setup and troubleshooting
• Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

What serial interfaces are supported by the Digi XBee3 2.4GHz ZB3.0 PCB Antenna?

The module supports UART, SPI and I2C serial data interfaces, allowing seamless integration with microcontrollers and host systems.

How do I configure network settings on the XBee3 module?

You can configure network parameters using Digi’s XCTU software via API frames or AT commands locally over serial, or perform over-the-air updates using the module’s OTA capability.

Can I mount this XBee3 module directly onto my custom PCB?

Yes, the Digi XBee3 is available in a compact micro footprint with through-hole pads and surface-mount pads, enabling easy soldering or socket mounting on custom PCBs.