This is the 380V variant of the Fotek 24-380V SSR-10DA Solid State Relay in Solid State Relays, Relays. Available at ₹231.28 (₹196.00 + GST) with free shipping across India.
Looking for Ssr-10da Relay? Fotek 24-380V SSR-10DA Solid State Relay is available at Zbotic with fast shipping across India.
Fotek 24-380V SSR-10DA Solid State Relay
This is DC To AC SSR-10DA Solid State Relay Module 24-380VAC 10A. A solid-state relay (SSR) allows you to control high-current AC loads from lower voltage DC control circuitry. Solid-state relays have several advantages over mechanical relays.
One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays. Also, because there are no moving contacts, solid-state relays can be switched much faster and for much longer periods without wearing out.
This particular SSR can switch current loads of up to 10A with a 3-32V DC input and a zero cross trigger control method. Each one of these relays is equipped with four screw terminals (for use with ring or fork connectors) and a plastic cover that slides over the top of the relay to protect the terminals.
Features:
- Long service life and high reliability
- Reduced electromagnetic interference.
- Highly reliable, compact size designed to offer users maximum simplicity.
specification –
| Model | SSR-10DA |
|---|---|
| Rated Load Current (A) | 10 |
| Trigger Voltage (VDC) | 3-32 |
| Switching Voltage (VAC) | 24-380@10A |
| Color | Light Gray |
| Length (mm) | 60 |
| Width (mm) | 45 |
| Height (mm) | 24 |
| Weight (gm) | 92 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 8 × 7 × 4 cm |
Note：-DA Means Direct Current Controlled Alternating Current
Package includes:
1 x 24-380V SSR-10DA Solid State Relay
Fotek 24-380V SSR-10DA Solid State Relay Overview
The Fotek SSR-10DA is a DC-to-AC solid state relay designed to switch AC loads from 24 VAC up to 380 VAC using a low-voltage DC control signal. With a 10 A load rating and zero-cross trigger circuitry, it’s ideal for reliable, noiseless switching of heating elements, motors, and industrial appliances.
Key Features of Fotek 24-380V SSR-10DA Solid State Relay
- Control Input: 3–32 VDC drive voltage for easy interfacing with microcontrollers and PLCs
- Load Capacity: Switches AC loads from 24 VAC to 380 VAC with a maximum current of 10 A
- Zero-Cross Trigger: Minimizes electrical noise and inrush currents by turning on at AC zero voltage points
- Long Service Life: No moving parts means high switching speed and extended reliability
- Compact Light Gray Module: Standard footprint for panel mounting or heat sink attachment
- Fast Shipping from Zbotic: Genuine Fotek relays dispatched quickly across India
Applications and Use Cases
- Temperature control systems for ovens and industrial heaters
- AC motor switching in conveyor belts and pumps
- Lighting control for stadiums, billboards, and architectural installations
- Home automation for air conditioners and water heaters
- PWM-based speed control in fan and blower applications
- Integration with PLCs in factory automation lines
How to Use Fotek 24-380V SSR-10DA Solid State Relay
To set up the SSR-10DA, mount the module on a suitable heat sink or panel. Connect your DC control source (3–32 VDC) to the input terminals (+ and –). Wire your AC supply and load across the output terminals, ensuring the load current does not exceed 10 A. The zero-cross feature reduces electrical stress, but proper heat dissipation is essential for continuous high-current operation.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What is the minimum control voltage required?
The SSR-10DA activates reliably with a 3 VDC input and can accept up to 32 VDC for driving the internal LED trigger.
Can I switch inductive loads like motors?
Yes. The zero-cross switching reduces inrush and electrical noise, making it suitable for AC motors, though a heat sink is recommended when operating near the 10 A limit.
Do I need any additional components to mount this relay?
For currents above 5 A, use a heatsink and thermal compound to dissipate heat. Otherwise, it can be panel-mounted directly using standard hardware.
How to Use GSM/GPS Module for IoT Tracking
Building a real-time vehicle tracker or remote sensor with GSM and GPS modules on Arduino is one of...
Read More →
Smart Gym IoT: Equipment Usage and Environment Monitor
Table of Contents Smart Gym Overview Equipment Usage Monitoring Environment Monitoring Occupancy and Flow Analysis Member Experience Enhancements...
Read More →
ESP32 Wroom vs Wrover: Flash and PSRAM Differences Explained
The ESP32 WROOM vs WROVER PSRAM debate is one of the most common questions beginners ask when they...
Read More →Technical Specifications
| Model | SSR-10DA |
|---|---|
| SKU | AI4143 |
| Weight | 0.12 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Fotek 24-380V SSR-10DA Solid State Relay is a versatile solid state relays used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Ishaan Pillai (verified owner) –
Great quality Fotek 24-380V SSR-10DA Solid State Relay. All channels working. Optocoupler isolation is a nice feature.
Chitra Bose –
Good quality Fotek 24-380V SSR-10DA Solid State Relay. Using it for my college project. Performs as expected.
Rohit Krishnan (verified owner) –
Very satisfied. My smart home system runs on these Fotek 24-380V SSR-10DA Solid State Relay modules. Totally reliable.
Lokesh Agarwal –
Great quality Fotek 24-380V SSR-10DA Solid State Relay. All channels working. Optocoupler isolation is a nice feature.
Bharat Desai (verified owner) –
Average Fotek 24-380V SSR-10DA Solid State Relay. Works but the relay generates some EMI. Added snubber to fix.
Ashwin Negi (verified owner) –
Outstanding quality! This Fotek 24-380V SSR-10DA Solid State Relay has been running 24/7 for months without a single failure.
Divyansh Goyal (verified owner) –
Average Fotek 24-380V SSR-10DA Solid State Relay. Works but the relay generates some EMI. Added snubber to fix.
Vikram Luthra (verified owner) –
Very satisfied. My smart home system runs on these Fotek 24-380V SSR-10DA Solid State Relay modules. Totally reliable.
Lalit Kumar (verified owner) –
Average Fotek 24-380V SSR-10DA Solid State Relay. Works but the relay generates some EMI. Added snubber to fix.
Anirudh Banerjee (verified owner) –
Great quality Fotek 24-380V SSR-10DA Solid State Relay. All channels working. Optocoupler isolation is a nice feature.
Sneha Trivedi (verified owner) –
This Fotek 24-380V SSR-10DA Solid State Relay is robust and well built. PCB quality is excellent.
Manish Iyer –
Good Fotek 24-380V SSR-10DA Solid State Relay. Works well. LED indicators are helpful for debugging.
Harsh Patil (verified owner) –
Great quality Fotek 24-380V SSR-10DA Solid State Relay. All channels working. Optocoupler isolation is a nice feature.
Milan Chopra (verified owner) –
Good Fotek 24-380V SSR-10DA Solid State Relay. Works well. LED indicators are helpful for debugging.
Aryan Mishra (verified owner) –
Good quality Fotek 24-380V SSR-10DA Solid State Relay. Using it for my college project. Performs as expected.
Anirudh Srivastava –
Great quality Fotek 24-380V SSR-10DA Solid State Relay. All channels working. Optocoupler isolation is a nice feature.
Ishaan Ghosh (verified owner) –
Perfect Fotek 24-380V SSR-10DA Solid State Relay for my IoT project. Controlling appliances remotely works flawlessly.
Ojas Sen (verified owner) –
Outstanding quality! This Fotek 24-380V SSR-10DA Solid State Relay has been running 24/7 for months without a single failure.
Vansh Naidu (verified owner) –
Outstanding quality! This Fotek 24-380V SSR-10DA Solid State Relay has been running 24/7 for months without a single failure.