The APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino is a compact and powerful board featuring the APDS-9960 sensor. This versatile sensor can measure ambient light and color, detect proximity, and recognize touchless gestures, enabling effortless control of computers, microcontrollers, robots, and more with simple hand motions. It’s the same sensor used in the Samsung Galaxy S5, making it one of the most affordable and accessible gesture sensors available.
The APDS9960 is a high-performance device, equipped with UV and IR blocking filters, four diodes sensitive to multiple directions, and an I2C-compatible interface for easy integration into your projects.
For your convenience, we have broken out the following
Pins: VL (optional power to IR LED); GND (Ground), VCC (power to APDS-9960 sensor), SDA (I2C data), SCL (I2C clock); and INT (interrupt). Each APDS-9960 also has a detection range of 4 to 8 inches (10 to 20 cm).
Applications
Gesture Detection.
Color Sense.
Ambient Light Sensing.
Cell Phone Touch Screen Disable.
Mechanical Switch Replacement.
Features
Operational Voltage: 3.3V.
Operating Range: 4-8in (10-20cm).
I2C Interface (I2C Address: 0x39).
Ambient Light and RGB Color Sensing, Proximity
Sensing, and Gesture Detection in an Optical Module
Ambient Light and RGB Color Sensing
– UV and IR blocking filters
– Programmable gain and integration time
– Very high sensitivity – Ideally suited for operation
behind dark glass
Proximity Sensing
– Trimmed to provide a consistent reading
– Ambient light rejection
– Offset compensation
– Programmable driver for IR LED current
– Saturation indicator bit
Complex Gesture Sensing
– Four separate diodes sensitive to different directions
– Ambient light rejection
– Offset compensation
– Programmable driver for IR LED current
– 32 dataset storage FIFO
– Interrupt driven I2C communication
I2C-bus Fast Mode Compatible Interface
– Data Rates up to 400 kHz
– Dedicated Interrupt Pin
Pin Configuration
Pin
Detail
VL
Optional Power to it LED if PS Jumper is disconnected.
Must Be 3-4.5v
GND
Connect to Ground.
VCC
Used to power the APDS-6690 sensor.
Must be 2.4-3.6v
SDA
i2c data
SCL
i2c clock
INT
External interrupt pin. Active LOW on interrupt event.
The APDS9960 RGB Gesture Sensor Detection I2C Breakout Module for Arduino is a versatile light/color sensor used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
Integrating into a custom electronics project
Learning and experimenting with circuits
Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
Free shipping on orders above ₹999 across India
Dispatched within 1-3 business days
Expected delivery: 3-7 business days depending on location
Secure packaging to ensure safe transit of electronic components
Weight
0.0 kg
Dimensions
3 × 3 × 2 cm
15 Days Warranty
Please note that this item is only covered by a standard supplier warranty against manufacturing defects for a period of 15days from the time of delivery. It is important to understand that only manufacturing defects are covered under this warranty, and any other issues will not be considered for reimbursement or replacement. We strongly advise inspecting the product upon delivery to ensure it meets your expectations. In case of any manufacturing defects, we guarantee reimbursement or replacement.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
Rahul Chauhan (verified owner) –
Average quality APDS9960 RGB Gesture Sensor Detection I2C. Functional but packaging was minimal.
Vinay Pillai (verified owner) –
Fantastic APDS9960 RGB Gesture Sensor Detection I2C! All GPIO pins tested and working. Great for prototyping.
Aditi Garg (verified owner) –
Great quality APDS9960 RGB Gesture Sensor Detection I2C. Uploaded my first sketch and it worked flawlessly. Ideal for beginners.
Sakshi Jain (verified owner) –
Great quality APDS9960 RGB Gesture Sensor Detection I2C. Uploaded my first sketch and it worked flawlessly. Ideal for beginners.
Dinesh Desai (verified owner) –
This APDS9960 RGB Gesture Sensor Detection I2C made my robotics project so much easier. Highly recommended for students.
Bharat Saxena (verified owner) –
Excellent APDS9960 RGB Gesture Sensor Detection I2C! Perfect for my Arduino project. All pins working correctly.
Aditi Joshi (verified owner) –
Nice APDS9960 RGB Gesture Sensor Detection I2C for the price. Using it in my college project, performs well.
Tanvi Naidu (verified owner) –
Good APDS9960 RGB Gesture Sensor Detection I2C. Works well with Arduino IDE. Headers could be soldered more neatly.
Shreyas Chatterjee (verified owner) –
Nice APDS9960 RGB Gesture Sensor Detection I2C for the price. Using it in my college project, performs well.
Sakshi Patil (verified owner) –
Excellent APDS9960 RGB Gesture Sensor Detection I2C! Perfect for my Arduino project. All pins working correctly.
Vidya Dhillon (verified owner) –
Decent quality APDS9960 RGB Gesture Sensor Detection I2C. Some pins needed cleaning but works fine now.
Tanya Vyas (verified owner) –
Pretty good APDS9960 RGB Gesture Sensor Detection I2C. Compatible with most libraries. Happy with the purchase.
Naveen Shetty (verified owner) –
Love this APDS9960 RGB Gesture Sensor Detection I2C. Using it for my home automation project, very reliable.
Ojas Batra (verified owner) –
Bought multiple units of this APDS9960 RGB Gesture Sensor Detection I2C. All working great. Best store for Arduino components.
Anonymous (verified owner) –
fine
Om Kapoor (verified owner) –
Pretty good APDS9960 RGB Gesture Sensor Detection I2C. Compatible with most libraries. Happy with the purchase.
Himanshu Mishra (verified owner) –
This APDS9960 RGB Gesture Sensor Detection I2C is genuine quality. My students love working with it in our robotics lab.
Neha Patil (verified owner) –
This APDS9960 RGB Gesture Sensor Detection I2C is genuine quality. My students love working with it in our robotics lab.
Deepika Iyer –
Great quality APDS9960 RGB Gesture Sensor Detection I2C. Uploaded my first sketch and it worked flawlessly. Ideal for beginners.
Meera Khanna (verified owner) –
Outstanding quality APDS9960 RGB Gesture Sensor Detection I2C. I teach electronics and order these in bulk for my classes.
Krishna Patil (verified owner) –
Great APDS9960 RGB Gesture Sensor Detection I2C for my college mini project. Got good marks thanks to this working perfectly!
Sakshi Thakur (verified owner) –
Excellent APDS9960 RGB Gesture Sensor Detection I2C! Built a weather station with this. Everything works as expected.
Manish Bisht (verified owner) –
This APDS9960 RGB Gesture Sensor Detection I2C made my robotics project so much easier. Highly recommended for students.