Contactless Thermometer: MLX90614 IR Sensor Gun

The contactless thermometer is one of the most exciting STEM projects you can take on in India today. Whether you are a school student preparing for a science exhibition, a BTech candidate working on your final year project, or a hobbyist building for the sheer joy of it, this comprehensive guide walks you through every step — from understanding the core concepts to sourcing components and building a working prototype.

India’s growing maker community and the availability of affordable electronic components mean you can build a contactless thermometer project without breaking the bank. In this guide, we cover the theory, component selection, circuit design, programming, and testing process in detail.

What is a Contactless Thermometer?

A contactless thermometer is a project that combines electronic components, microcontroller programming, and mechanical design to create a functional system. In the context of STEM education and competitions, this project demonstrates practical application of physics, electronics, and computer science principles.

The concept has gained significant traction in Indian educational institutions following the National Education Policy 2020’s emphasis on experiential learning. Engineering colleges across India — IITs, NITs, and private universities — regularly feature contactless thermometer projects in their techfests and innovation showcases.

For students competing in events like Technoxian, Robocon, or IIT techfests, a well-executed contactless thermometer project can be a standout entry. The key lies not just in making it work but in understanding and documenting the underlying principles.

How Does It Work? Core Principles

Understanding the science behind your contactless thermometer project is essential, both for building it correctly and for explaining it to judges or examiners. Here are the fundamental principles involved:

Electronic Principles

At its core, this project relies on sensor input, microcontroller processing, and actuator output — the fundamental feedback loop of embedded systems. Sensors convert physical phenomena (light, temperature, distance, force, or motion) into electrical signals. The microcontroller reads these signals through analog or digital pins, processes them according to your programmed logic, and drives outputs like motors, displays, or communication modules.

Signal Processing

Raw sensor data is rarely clean. You will need to implement filtering (moving average or exponential smoothing), thresholding (to distinguish meaningful signals from noise), and calibration (mapping raw ADC values to physical units). These are skills that transfer directly to professional engineering work.

Control Systems

For projects involving motors or actuators, a control algorithm determines how the system responds to sensor input. Simple on-off control works for basic applications. PID (Proportional-Integral-Derivative) control provides smoother, more accurate responses and is the industry standard for most control applications.

Components and Materials Required

Here is a comprehensive bill of materials for building a contactless thermometer project:

Core Electronics

Estimated total budget: ₹1,500-3,500 depending on the complexity level you choose.

Tools Required

• Soldering iron (25-40W) and solder wire
• Wire stripper and cutter
• Digital multimeter for testing
• Screwdriver set
• Hot glue gun for securing components
• Computer with Arduino IDE installed

Circuit Design and Schematic

A clean circuit design is the foundation of a reliable contactless thermometer project. Follow these design principles:

Power Management

Separate your logic power (5V for Arduino) from motor/actuator power. Use a dedicated battery pack for motors and connect grounds together. This prevents voltage drops and noise from motors affecting your microcontroller. Add a 100 uF electrolytic capacitor across the motor power supply for decoupling.

Sensor Connections

Use appropriate pull-up or pull-down resistors for digital sensors. For analog sensors, check the voltage range and ensure it matches your Arduino’s ADC reference (typically 0-5V). Place sensors away from motors and power wires to minimise electromagnetic interference.

Signal Routing

Keep signal wires short and routed away from power lines. For I2C communications (used by many OLED displays and sensor breakouts), use wires under 30 cm and add 4.7k pull-up resistors on SDA and SCL lines if not already present on the breakout board.

Use Fritzing or Tinkercad Circuits to create your schematic before building. This allows you to simulate the circuit virtually and catch wiring errors before they damage components.

Programming and Code Walkthrough

The software for your contactless thermometer project should follow a modular structure for clarity and maintainability:

Code Architecture

// === Contactless Thermometer Project ===
// Pin definitions
#define SENSOR_PIN A0
#define MOTOR_PIN 9
#define LED_PIN 13

// Calibration constants
const int THRESHOLD = 512;
const int SAMPLE_COUNT = 10;

void setup() {
  Serial.begin(9600);
  pinMode(MOTOR_PIN, OUTPUT);
  pinMode(LED_PIN, OUTPUT);
  Serial.println("Contactless Thermometer initialised");
}

void loop() {
  // Read sensor with averaging
  int sensorValue = readSensorAverage(SAMPLE_COUNT);

  // Process and decide
  if (sensorValue > THRESHOLD) {
    activateOutput();
  } else {
    deactivateOutput();
  }

  // Log data for debugging
  Serial.print("Sensor: ");
  Serial.println(sensorValue);
  delay(100);
}

int readSensorAverage(int samples) {
  long total = 0;
  for (int i = 0; i < samples; i++) {
    total += analogRead(SENSOR_PIN);
    delay(2);
  }
  return total / samples;
}

void activateOutput() {
  analogWrite(MOTOR_PIN, 200);
  digitalWrite(LED_PIN, HIGH);
}

void deactivateOutput() {
  analogWrite(MOTOR_PIN, 0);
  digitalWrite(LED_PIN, LOW);
}

Key programming tips:

• Always add serial print statements during development for debugging.
• Use #define for pin numbers so they are easy to change.
• Implement sensor averaging to filter noise.
• Break your code into functions — judges appreciate well-structured code.
• Add comments explaining the “why”, not just the “what”.

Step-by-Step Build Process

1. Plan on paper first: Sketch the mechanical layout, mark sensor positions, and plan wire routing before touching any components.
2. Assemble the chassis/housing: Whether using acrylic, MDF, 3D-printed parts, or a ready-made chassis, get the physical structure ready first.
3. Mount the microcontroller: Secure the Arduino using standoffs or a mounting plate. Ensure USB port remains accessible for programming.
4. Wire the power circuit: Connect the battery, voltage regulators, and power distribution. Test with a multimeter before connecting any modules.
5. Install sensors: Mount sensors in their final positions. Secure with screws or hot glue. Run wires neatly using cable ties.
6. Connect motor drivers and actuators: Wire motor driver modules and test each motor individually before connecting all together.
7. Upload and test code: Start with basic sensor reading code. Verify each sensor works before loading the full program.
8. Calibrate: Adjust threshold values, PID constants, and timing parameters based on real-world testing.
9. Final assembly: Secure all wires, add labels, and ensure nothing can vibrate loose during operation or transport.

Testing, Calibration, and Troubleshooting

Systematic Testing Approach

Test each subsystem independently before integrating. Check sensors first, then actuators, then the control loop. This isolation approach makes it much easier to identify which component is causing a problem.

Common Issues and Solutions

Documentation for Submission

If this is a college or competition submission, ensure your documentation includes: a block diagram, circuit schematic, flowchart of program logic, bill of materials with costs, photographs of the build process, test results with data, and a conclusion discussing what worked and what could be improved.

Frequently Asked Questions