Product Description:
KK2.1.5 Multi-rotor LCD Flight Control Board with 6050MPU and Atmel 644PA
The KK2 1.5 Flight Controller Board, equipped with a 6050 MPU and an Atmel 644PA, is an enhanced version of the original KK flight control boards. Featuring a user-friendly LCD screen and intuitive software, it simplifies installation and configuration. Users can select from a variety of pre-installed multi-rotor craft types, verify motor layout and propeller direction, calibrate ESCs and radio, and follow on-screen instructions for setup.
The gyro system of the KK2 has been upgraded to a more sensitive 6050 MPU system, offering increased stability and an auto-level feature. The KK2 1.5 operates on an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64KB of memory.
For guidance on using the KK2 1.5 Flight Controller, please refer to the manual.
Note:
- This product is available in 2 types, having black & pink buttons, which will be shipped randomly. Most probably, you’ll get a board with pink buttons.
- It is always recommended to update to the latest software version as part of your initial setup. (this is different than v1.6 for 2.0)
Features:
- Auto Level
- Standard 6 Pin AVR Interface
- 1520us (5 channels) Signal from the receiver
Firmware Version: 1.6:
- Pre-installed firmware., Dualcopter, Tricopter.
- Y6, Quadcopter +, Quadcopter X, Hexcopter +, Hexcopter X, Octocopter +, Octocopter X.
- X8 +, X8 X, H8, H6, V8, V6.
- Flying Wing.
- Singlecopter 2M 2S, Singlecopter 1M 4S.
- Custom Mix via the “Mixer Editor” option:
- The Mixer Editor allows you to adjust where and how much signal the motors receive from stick input and sensors. This allows you to create any configuration possible with up to 8 motors or servos.
Specifications:
| Model | KK2 |
|---|---|
| Input Voltage (V) | 4.8V-6.0V |
| Firmware | Pre-installed firmware |
| Sensor | 6050 MCU |
| Processor | Atmel 644PA |
| Micro-SD Card Slot | No |
| Length (mm): | 52 |
| Width (mm): | 52 |
| Height (mm): | 12 |
| Weight (g): | 26 |
Package Includes
- 1 x KK2 1.5 Flight Controller Board W/ 6050 MPU BOARD.
- 1 x Piezo buzzer.
- 2 x servo wire
Attachments:
( ⮝ click to download )
Video:
How to Build an Agriculture Spray Drone (DIY Guide)
An agriculture spray drone can cover one acre in under 10 minutes, reduce chemical usage by 30–40% through...
Read More →
ExpressLRS vs ELRS vs FrSky: Best RC Link System 2026
ExpressLRS vs FrSky vs Other RC Link Systems: Best Choice for Indian Drone Pilots in 2026 Choosing the...
Read More →
Drone Weight Optimization: Every Gram Counts in FPV
Table of Contents Understanding Drone Weight Optimization Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation Practical...
Read More →Technical Specifications
| Model | KK2 |
|---|---|
| SKU | AI0237 |
| Weight | 0.05 kg |
| Availability | In Stock |
Applications & Use Cases
The KK2.1.5 Multi-rotor LCD Flight Control Board with 6050MPU and Atmel 644PA is a versatile flight controller & accessories used across a wide range of applications including autonomous drones, FPV racing quadcopters, agricultural drones, and surveying and mapping platforms.
Common use cases:
- Central brain for drone stabilization and navigation
- GPS waypoint missions for surveying
- Acro mode flying for FPV freestyle
This product is ideal for drone builders requiring precise flight control.
Technical Tip: F4 processors are good for basic builds; F7 or H7 recommended for advanced features. Ensure firmware compatibility (Betaflight, ArduPilot, iNAV).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Ankit Dhawan (verified owner) –
Using this KK2.1.5 Multi-rotor LCD Flight Control Board in my FPV drone build. Quality is top notch. Very happy with the purchase.
Deepika Grewal (verified owner) –
Good product overall. My drone is flying well with this KK2.1.5 Multi-rotor LCD Flight Control Board. Satisfied with the purchase.
Ashish Tandon (verified owner) –
Solid KK2.1.5 Multi-rotor LCD Flight Control Board. Not the absolute best but excellent value for the price point.
Meera Bhandari (verified owner) –
My 5th order from Zbotic. This KK2.1.5 Multi-rotor LCD Flight Control Board is excellent as always. Totally reliable store.
Suresh Desai (verified owner) –
Superb KK2.1.5 Multi-rotor LCD Flight Control Board! Built my first drone with this and it performed beyond expectations.
Harshit Tiwari (verified owner) –
Amazing build quality! This KK2.1.5 Multi-rotor LCD Flight Control Board is sturdy and lightweight at the same time.
Uday Vohra (verified owner) –
Good quality KK2.1.5 Multi-rotor LCD Flight Control Board. Minor scratches on arrival but functionally perfect.
Jayesh Goyal (verified owner) –
Very good quality KK2.1.5 Multi-rotor LCD Flight Control Board. I’ve been building drones for 2 years now and this is one of the best I’ve used.
Karan Trivedi –
Very impressed with this KK2.1.5 Multi-rotor LCD Flight Control Board. My drone’s performance improved noticeably.
Paras Luthra (verified owner) –
Using this KK2.1.5 Multi-rotor LCD Flight Control Board in my hexacopter. Smooth operation and excellent thrust.
Tarun Negi (verified owner) –
This KK2.1.5 Multi-rotor LCD Flight Control Board is value for money. Comparing with other brands, Zbotic offers the best deal.
Dhruv Das (verified owner) –
Using this KK2.1.5 Multi-rotor LCD Flight Control Board in my FPV drone build. Quality is top notch. Very happy with the purchase.
Sunil Tandon –
Good KK2.1.5 Multi-rotor LCD Flight Control Board. Works well for my drone build. Packaging could be slightly better.
Tanya Vohra (verified owner) –
Decent KK2.1.5 Multi-rotor LCD Flight Control Board for the price. Using it in my quadcopter, performs well overall.
Yashwant Modi (verified owner) –
Using this KK2.1.5 Multi-rotor LCD Flight Control Board in my FPV drone build. Quality is top notch. Very happy with the purchase.
Akash Goyal (verified owner) –
My 5th order from Zbotic. This KK2.1.5 Multi-rotor LCD Flight Control Board is excellent as always. Totally reliable store.
Sakshi Shah (verified owner) –
Very impressed with this KK2.1.5 Multi-rotor LCD Flight Control Board. My drone’s performance improved noticeably.
Aman Dhawan –
Amazing build quality! This KK2.1.5 Multi-rotor LCD Flight Control Board is sturdy and lightweight at the same time.
Rakesh Mittal (verified owner) –
Amazing build quality! This KK2.1.5 Multi-rotor LCD Flight Control Board is sturdy and lightweight at the same time.
Ajay Nayak (verified owner) –
Perfect for my agriculture drone project. This KK2.1.5 Multi-rotor LCD Flight Control Board handles the weight effortlessly.
Anushka Mittal (verified owner) –
Nice KK2.1.5 Multi-rotor LCD Flight Control Board, does the job. Delivery took a couple of extra days but product is solid.
Dhruv Mukherjee –
Good product overall. My drone is flying well with this KK2.1.5 Multi-rotor LCD Flight Control Board. Satisfied with the purchase.
Swati Ghosh (verified owner) –
Solid KK2.1.5 Multi-rotor LCD Flight Control Board. Not the absolute best but excellent value for the price point.
Saurabh Sen –
Outstanding KK2.1.5 Multi-rotor LCD Flight Control Board! Installed it on my racing quad and the performance is amazing.
Hemant Gupta (verified owner) –
Decent KK2.1.5 Multi-rotor LCD Flight Control Board for the price. Using it in my quadcopter, performs well overall.
Priya Panchal (verified owner) –
Great quality KK2.1.5 Multi-rotor LCD Flight Control Board. Perfect specs for my drone project. Fast delivery too!
Ravi Banerjee (verified owner) –
Very good quality KK2.1.5 Multi-rotor LCD Flight Control Board. I’ve been building drones for 2 years now and this is one of the best I’ve used.
Eshan Patil –
Decent KK2.1.5 Multi-rotor LCD Flight Control Board for the price. Using it in my quadcopter, performs well overall.
Tahir Yusuf Khan (verified owner) –
I am very much satisfied with the products I have purchased 👍 The delivery was done in allotted days👌 Excellent Service & Excellent Product👍 Thanks to the entire team of Zbotic ⚡⚡✨⚡⚡
Vansh Reddy (verified owner) –
Good product overall. My drone is flying well with this KK2.1.5 Multi-rotor LCD Flight Control Board. Satisfied with the purchase.
Eshan Tiwari (verified owner) –
Outstanding KK2.1.5 Multi-rotor LCD Flight Control Board! Installed it on my racing quad and the performance is amazing.