102535 3.7V 800mAh Lithium Polymer (LiPo) Rechargeable Battery
Product Description:
The 102535 3.7V 800mAh Lithium Polymer (LiPo) rechargeable battery is engineered for applications demanding a balance of capacity and compact size. With its high energy density, this battery is perfect for a variety of devices including wearables, remote sensors, and miniaturized electronics. Built with advanced technology for safety and performance, the 102535 LiPo battery delivers reliable and durable power, ensuring optimal functionality for your devices.
Technical Specifications:
- Model Number: 102535
- Type: Lithium Polymer (LiPo)
- Nominal Voltage: 3.7V
- Capacity: 800mAh
- Dimensions:
- 37mm x 25mm x 9.5mm (L.B.H.)
- Weight: Approximately 40 grams
- Discharge Rate: 1C (maximum continuous)
- Charge Rate: 1C (maximum)
- Charging Voltage: 4.2V ± 0.05V
- Discharging Voltage: 3.0V (cut-off voltage)
- Cycle Life: Up to 300-500 cycles (dependent on discharge conditions)
- Connector Type: JST or customizable (please specify)
- Operating Temperature Range:
- Charge: 0°C to 45°C
- Discharge: -20°C to 60°C
- Storage Conditions: Store in a cool, dry place at a charge level of 40-60% for optimal lifespan.
- Safety Features:
- Overcharge protection
- Over-discharge protection
- Short-circuit protection
- Thermal protection
Application Areas:
- Wearable electronics (fitness trackers, smartwatches)
- Remote control devices and drones
- Medical devices including portable equipment
- IoT devices and sensors
- Robotics and DIY electronics projects
- Consumer electronics requiring compact energy sources
Package Includes:
- 1 x 102535 800mAh 3.7V LiPo Battery
Battery Tab Spot Welder: Capacitor Bank Build Guide
Building a battery tab spot welder from a capacitor bank is one of the most useful tool projects...
Read More →
Power Supply Noise Filter: Clean Power for Audio Projects
Table of ContentsUnderstanding Power Supply Noise Types of Noise in Electronic Systems LC Filter Design Capacitor Selection for...
Read More →
Emergency Solar Lantern DIY: Build with 18650 and Panel
Emergency Solar Lantern DIY: Build with 18650 and Panel Power cuts are a reality across much of India,...
Read More →Technical Specifications
| Brand | KP |
|---|---|
| Battery Capacity | 800mAh |
| Interface / Protocol | BLE |
| SKU | AI6794 |
| Weight | 0.02 kg |
| Availability | Out of Stock |
Applications & Use Cases
The KP Original 102535 800mAh 3.7Vsingle cell Rechargeable LiPo Battery is a versatile single cell micro lipo battery used across a wide range of applications including FPV drones, RC vehicles, portable electronics, robotics, and airsoft guns.
Common use cases:
- Powering an FPV racing drone
- Running a high-current RC car
- Portable power for field robotics
This product is ideal for drone pilots, RC enthusiasts, and robotics builders.
Technical Tip: Never discharge below 3.5V per cell. Store at 3.8V per cell. Always use a balance charger and never leave charging unattended. Use a LiPo bag for safety.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine KP product sourced from authorized channels
Prashant Chauhan (verified owner) –
Great KP Original 102535 800mAh 3.7Vsingle cell. Voltage is rock solid under varying loads. Highly recommended.
Vipin Tiwari (verified owner) –
This KP Original 102535 800mAh 3.7Vsingle cell is reliable and efficient. Running my IoT setup 24/7 with no issues.
Ashish Parekh –
This KP Original 102535 800mAh 3.7Vsingle cell performs flawlessly. Voltage regulation is precise and consistent.
Girish Gill (verified owner) –
This KP Original 102535 800mAh 3.7Vsingle cell is exactly what I needed. Output current capacity is as advertised.
Gauri Pillai (verified owner) –
Good quality KP Original 102535 800mAh 3.7Vsingle cell. Ripple is low. Suitable for most electronics projects.
Akshat Banerjee (verified owner) –
This KP Original 102535 800mAh 3.7Vsingle cell performs flawlessly. Voltage regulation is precise and consistent.
Simran Pillai (verified owner) –
Great quality KP Original 102535 800mAh 3.7Vsingle cell. Powering my entire project board with this. Very reliable.
Sarthak Arora –
Good KP Original 102535 800mAh 3.7Vsingle cell. Output is stable. Gets slightly warm under full load but nothing concerning.
Nikita Rao (verified owner) –
This KP Original 102535 800mAh 3.7Vsingle cell is reliable and efficient. Running my IoT setup 24/7 with no issues.
Zara Batra (verified owner) –
Good quality KP Original 102535 800mAh 3.7Vsingle cell. Ripple is low. Suitable for most electronics projects.
Vidya Desai (verified owner) –
This KP Original 102535 800mAh 3.7Vsingle cell is reliable and efficient. Running my IoT setup 24/7 with no issues.
Darshan Solanki (verified owner) –
Bought multiple units of this KP Original 102535 800mAh 3.7Vsingle cell. All consistent quality. Zbotic is reliable.
Anand Batra (verified owner) –
Great KP Original 102535 800mAh 3.7Vsingle cell. Voltage is rock solid under varying loads. Highly recommended.
Ayush Batra –
Love this KP Original 102535 800mAh 3.7Vsingle cell. Compact size and excellent performance. Worth the price.
Yogesh Saini (verified owner) –
This KP Original 102535 800mAh 3.7Vsingle cell is reliable and efficient. Running my IoT setup 24/7 with no issues.
Piyush Trivedi (verified owner) –
Perfect KP Original 102535 800mAh 3.7Vsingle cell for my portable project. Battery life is better than expected.
Ojas Das (verified owner) –
Good quality KP Original 102535 800mAh 3.7Vsingle cell. Ripple is low. Suitable for most electronics projects.
Gaurav Rajan (verified owner) –
Outstanding! This KP Original 102535 800mAh 3.7Vsingle cell supplies clean power to my sensitive circuits. No noise at all.
Sachin Das (verified owner) –
Good quality KP Original 102535 800mAh 3.7Vsingle cell. Ripple is low. Suitable for most electronics projects.
Tanya Thakur (verified owner) –
Love this KP Original 102535 800mAh 3.7Vsingle cell. Compact size and excellent performance. Worth the price.
Milan Trivedi –
Good KP Original 102535 800mAh 3.7Vsingle cell. Output is stable. Gets slightly warm under full load but nothing concerning.
Arjun Bose (verified owner) –
Very satisfied with this KP Original 102535 800mAh 3.7Vsingle cell. Using it in my solar project, charges perfectly.
Naveen Malhotra (verified owner) –
This KP Original 102535 800mAh 3.7Vsingle cell is exactly what I needed. Output current capacity is as advertised.
Sarika Chatterjee (verified owner) –
This KP Original 102535 800mAh 3.7Vsingle cell is exactly what I needed. Output current capacity is as advertised.
Rahul Kulkarni (verified owner) –
Decent KP Original 102535 800mAh 3.7Vsingle cell. Voltage output is accurate. Compact form factor is a plus.
Himanshu Ghosh –
This KP Original 102535 800mAh 3.7Vsingle cell is reliable and efficient. Running my IoT setup 24/7 with no issues.
Riya Agarwal –
Bought multiple units of this KP Original 102535 800mAh 3.7Vsingle cell. All consistent quality. Zbotic is reliable.
Rahul Gupta (verified owner) –
Average KP Original 102535 800mAh 3.7Vsingle cell. Works but efficiency could be better. Adequate for basic projects.
Chirag Chauhan (verified owner) –
This KP Original 102535 800mAh 3.7Vsingle cell is exactly what I needed. Output current capacity is as advertised.
Nikhil Choudhury (verified owner) –
Superb KP Original 102535 800mAh 3.7Vsingle cell! Efficiency is high and it runs cool even under load.