TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
Note: This product comes in two variants of IC (TP4056 and XL 4056A,HW-107) that work the same way. We will ship either one randomly.
This module is a TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection. It is ideal for charging single cell 3.7V lithium-ion (Li-Ion) batteries with a capacity of 1 Ah or more, such as 16550s, that lack their own protection circuit. It uses the TP4056 charger IC and the DW01 battery protection IC to provide 1A of charging current and to stop charging when the battery is full.
Additionally, the protection IC will disconnect the load if the battery voltage falls below 2.4V, preventing the cell from operating at a dangerously low voltage. It also protects against over-voltage and reverse polarity connection, although it may damage itself instead of the battery in such cases. Therefore, please ensure that you connect it correctly the first time.
This module is manufactured with fully automated machinery and tested for quality and performance before shipping from zbotic.in. It is specially designed for single lithium battery charging. Other features of the TP4056 include a current monitor, an under-voltage lockout, an automatic recharge function, and two status pins that indicate charge termination and input voltage presence.
Using the module:
Connect micro-USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module.
Connect cell to charge to B+/B- pads on the right-hand side of the module.
A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side.
Important! Disconnect load when charging.
The red LED indicates charging in progress, green LED indicates charging has finished.
Never charge your battery at a rate greater than 1C.
NOTE:
1. Ampere meter can only be connected to a 5v input end of the module.
2. It is better than the charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, a current of 400mAh is enough.
3. The connection wire should not be too thick.
4. Make sure the connect point is good.
5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to the chip.
6. NO Reverse polarity.
We have 3 more such charging boards employing same TP4056 chip which are available at zbotic.in.
and they are different according to the onboard USB port and current protection they provide,
Features :
Led indicator: red is charging Green is fully charged.
Current Protection: Yes
Inversed polarity: NO.
Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
Fully machinery automated processing, all patch parts manufacturing.
Package Includes :
1 x TP4056 1A Li-Ion Battery Charging Board Micro USB with Current Protection
Expected delivery: 3-7 business days depending on location
Secure packaging to ensure safe transit of electronic components
Weight
0.0 kg
15 Days Warranty
Please note that this item is only covered by a standard supplier warranty against manufacturing defects for a period of 15days from the time of delivery. It is important to understand that only manufacturing defects are covered under this warranty, and any other issues will not be considered for reimbursement or replacement. We strongly advise inspecting the product upon delivery to ensure it meets your expectations. In case of any manufacturing defects, we guarantee reimbursement or replacement.
What voids warranty:
If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.
Mukesh Sharma (verified owner) –
excellent
Amit Rawat (verified owner) –
Great quality TP4056 1A Li-Ion Battery Charging Board. Powering my entire project board with this. Very reliable.
Utkarsh Mittal (verified owner) –
Very satisfied with this TP4056 1A Li-Ion Battery Charging Board. Using it in my solar project, charges perfectly.
Kabir Patil –
Average TP4056 1A Li-Ion Battery Charging Board. Works but efficiency could be better. Adequate for basic projects.
Farhan Kohli (verified owner) –
Decent TP4056 1A Li-Ion Battery Charging Board. Voltage output is accurate. Compact form factor is a plus.
Ajay Kohli (verified owner) –
Love this TP4056 1A Li-Ion Battery Charging Board. Compact size and excellent performance. Worth the price.
Mahesh Patil (verified owner) –
Perfect TP4056 1A Li-Ion Battery Charging Board for my portable project. Battery life is better than expected.
Ojas Vohra (verified owner) –
Superb TP4056 1A Li-Ion Battery Charging Board! Efficiency is high and it runs cool even under load.
Lakshya Khanna (verified owner) –
This TP4056 1A Li-Ion Battery Charging Board is reliable and efficient. Running my IoT setup 24/7 with no issues.
Sarthak Khanna (verified owner) –
Very satisfied with this TP4056 1A Li-Ion Battery Charging Board. Using it in my solar project, charges perfectly.
Kunj Bihari Prasad (verified owner) –
Good one
Aarav Garg –
Average TP4056 1A Li-Ion Battery Charging Board. Works but efficiency could be better. Adequate for basic projects.
Pravin Gondariya (verified owner) –
Good.
AGUSTA DSOUZA (verified owner) –
Very useful module. Can be used for a variety of electronic applications where rechargeable Li-ion battery is used,
PRASAD KHARE (verified owner) –
Worth purchase
Rohan Rao (verified owner) –
Bought multiple units of this TP4056 1A Li-Ion Battery Charging Board. All consistent quality. Zbotic is reliable.
Rishabh Kamath –
Superb TP4056 1A Li-Ion Battery Charging Board! Efficiency is high and it runs cool even under load.
Rakesh Mukherjee (verified owner) –
Nice TP4056 1A Li-Ion Battery Charging Board. Works as expected for my power needs. Good efficiency.
Ajay Trivedi (verified owner) –
Superb TP4056 1A Li-Ion Battery Charging Board! Efficiency is high and it runs cool even under load.
Kiara Pillai (verified owner) –
Decent TP4056 1A Li-Ion Battery Charging Board. Voltage output is accurate. Compact form factor is a plus.
Sanya Pillai (verified owner) –
Very satisfied with this TP4056 1A Li-Ion Battery Charging Board. Using it in my solar project, charges perfectly.
Pooja Khanna (verified owner) –
Good TP4056 1A Li-Ion Battery Charging Board. Output is stable. Gets slightly warm under full load but nothing concerning.