Looking for Here3+ Gps Istand Receiver? Here3+ GPS receiver with iStand is available at Zbotic with fast shipping across India.
- CubePilot Here3+ GPS Module w/ iStand
- Enhanced dust and water resistance
- High data rate and real-time features
- Powered by dual-core STM32H757 processor.
- Features built-in IMU for advanced navigation.
The CubePilot Here3+ GPS Module w/ iStand is a highly economical GNSS system that boasts RTK mode support, offering positioning accuracy down to the centimeter level under optimal conditions. This model exhibits enhanced resistance to dust and water compared to its predecessor, the original Here+, although it is not guaranteed to be completely waterproof.
The Here3+ GPS module is characterized by its high data rate, upgradeability, noise immunity, and real-time features, all of which are made possible by the DroneCAN protocol. The system has transitioned to the DroneCAN 8 Mbit bus speed and is compatible with future firmware updates.
The Here3+ GPS module is powered by the dual-core STM32H757 processor, which operates at a speed of 400 MHz and is equipped with 2 MByte Flash and 1 MByte RAM. This is a significant upgrade from the Here 3 model, which uses the STM32F302 processor.
The system also features a built-in IMU, which includes a compass, gyroscope, and accelerometer, to cater to advanced navigation requirements. Future updates for the system will be accessible via Mission Planner.
Please note that while the Here3+ GPS module has improved dust and water resistance, it is not guaranteed to be completely waterproof.
package Include-
- 1x Here3+ GPS Module
- 1x iStand
Here3+ GPS receiver with iStand Overview
The Here3+ GPS receiver with iStand is a high-precision GNSS module designed for drone and robotic navigation. Featuring u-blox M8P-2 technology and RTK support, it delivers centimeter-level positioning accuracy for demanding aerial and land-based applications.
Key Features of Here3+ GPS receiver with iStand
- Dual-core STM32H757 processor for real-time data handling and noise immunity
- u-blox M8P-2 GNSS module supporting GPS L1C/A, GLONASS L1OF and BeiDou B1I constellations
- RTK mode with 0.025 m accuracy and 3D FIX accuracy of 2.5 m under standalone operation
- Built-in IMU sensors (ICM42688 accelerometer/gyro and RM3100 magnetometer) for advanced orientation data
- 8 Hz navigation update rate over Drone CAN 8 Mbit/s interface
- Enhanced dust and water resistance with integrated iStand mount for secure installation
- Genuine product, ready stock and fast shipping from Zbotic across India
Applications and Use Cases
- Precision agriculture UAVs requiring RTK-level positioning for crop mapping
- Surveying and mapping drones where centimeter accuracy is critical
- Autonomous land vehicles and rovers for industrial inspection
- Search and rescue drones performing waypoint navigation in challenging environments
- Research robots needing high-rate GNSS and IMU fusion for SLAM experiments
How to Use Here3+ GPS receiver with iStand
Mount the Here3+ module securely on your vehicle using the included iStand, connect it to your autopilot’s Drone CAN port, and power up the system. Configure RTK settings in your flight controller software, calibrate the onboard IMU sensors, then establish a base or network RTK link to begin centimeter-level positioning.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What positioning accuracy can I expect in RTK mode?
In RTK mode under optimal conditions, the Here3+ achieves horizontal positioning accuracy of 0.025 m (2.5 cm), making it suitable for precision tasks.
Which GNSS constellations are supported?
The Here3+ receiver covers GPS L1C/A, GLONASS L1OF and BeiDou B1I, ensuring robust multi-constellation coverage for reliable fixes.
How do I integrate the Here3+ with my flight controller?
Simply install the module on the iStand mount, connect the Drone CAN cable to your flight controller’s CAN port, then configure the CAN ID and RTK parameters in your autopilot software.
Drone Tool Kit: Essential Tools for Building and Repair
Table of Contents Understanding Drone Tool Kit Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation Practical...
Read More →
How to Calibrate ESC on a Drone: Step-by-Step Tutorial
Table of ContentsWhat Is ESC Calibration and Why Does It Matter?Signs That Your ESCs Need CalibrationTypes of ESC...
Read More →
Octocopter Drone Build: Heavy Lift Platform for Industry
Octocopter Drone Build: Complete Guide to Heavy Lift Industrial Platforms When a quadcopter simply does not have enough...
Read More →Technical Specifications
| SKU | AI5192 |
|---|---|
| Weight | 0.24 kg |
| Availability | In Stock |
Applications & Use Cases
The Here3+ GPS receiver with iStand is a versatile gps modules used across a wide range of applications including drone navigation, asset tracking, fleet management, precision agriculture, and hiking/outdoor gadgets.
Common use cases:
- Adding GPS waypoint navigation to a drone
- Building a vehicle tracker
- Precision positioning for surveying
This product is ideal for drone builders, fleet managers, and outdoor electronics developers.
Technical Tip: Multi-constellation receivers (GPS + GLONASS + BeiDou) provide faster and more accurate fixes. RTK modules offer centimeter-level precision.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Ajay Bajaj (verified owner) –
Superb Here3+ GPS receiver with iStand! Using it in my asset tracking project. GPS accuracy is great.
Pooja Garg (verified owner) –
Very satisfied with this Here3+ GPS receiver with iStand. Low power consumption makes it ideal for battery projects.
Anil Saxena –
Outstanding! This Here3+ GPS receiver with iStand made my IoT mesh network project possible. Highly recommended.
Vaishali Srivastava (verified owner) –
Outstanding! This Here3+ GPS receiver with iStand made my IoT mesh network project possible. Highly recommended.
Arjun Ghosh (verified owner) –
This Here3+ GPS receiver with iStand is reliable and consistent. Using it for long-range data transfer.
Vansh Agarwal (verified owner) –
Good Here3+ GPS receiver with iStand. Range is decent. Antenna orientation matters for best performance.
Sunil Nayak (verified owner) –
This Here3+ GPS receiver with iStand is reliable and consistent. Using it for long-range data transfer.
Vishal Mittal (verified owner) –
Good Here3+ GPS receiver with iStand. Range is decent. Antenna orientation matters for best performance.
Sanjay Rathore (verified owner) –
Very satisfied with this Here3+ GPS receiver with iStand. Low power consumption makes it ideal for battery projects.
Aditya Joshi (verified owner) –
This Here3+ GPS receiver with iStand is reliable and consistent. Using it for long-range data transfer.
Aanya Dhawan (verified owner) –
Good Here3+ GPS receiver with iStand. Range is decent. Antenna orientation matters for best performance.
Gauri Rao –
Love this Here3+ GPS receiver with iStand. Integrated it with my Arduino in no time. Excellent documentation.
Rajesh Chauhan (verified owner) –
Nice Here3+ GPS receiver with iStand. Works well with the library examples. Good for prototyping.
Pooja Verma (verified owner) –
This Here3+ GPS receiver with iStand is reliable and consistent. Using it for long-range data transfer.
Gauri Kapoor (verified owner) –
This Here3+ GPS receiver with iStand is reliable and consistent. Using it for long-range data transfer.
Vidya Patil (verified owner) –
Very satisfied with this Here3+ GPS receiver with iStand. Low power consumption makes it ideal for battery projects.
Gaurav Tiwari (verified owner) –
Perfect Here3+ GPS receiver with iStand for wireless communication. Range exceeds the specifications.
Yogesh Chauhan (verified owner) –
Decent Here3+ GPS receiver with iStand. Connection is stable indoors. Outdoor range slightly less than expected.
Rajesh Srivastava (verified owner) –
Love this Here3+ GPS receiver with iStand. Integrated it with my Arduino in no time. Excellent documentation.