This is the 18V variant of the Water Flow Sensor (Sea) YF-S402C Flowmeter G3/8 0.3-10L/min 5-18V in Flow, Water TDS, pH, Flow, Level and Pressure Sensor. Available at ₹287.92 (₹244.00 + GST) with free shipping across India.
Looking for Water Flow Sensor Yf-s402c? Water Flow Sensor (Sea) YF-S402C Flowmeter G3/8 0.3-10L/min 5-18V is available at Zbotic with fast shipping across India.
Water Flow Sensor (Sea) YF-S402C Flowmeter G3/8 0.3-10L/min 5-18V
The YF-S402C water flow sensor is designed to accurately measure liquid flow rates in various systems. Featuring a plastic valve body, flow rotor, and hall effect sensor, it is typically installed at the inlet to monitor water flow. As liquid passes through, the magnetic rotor spins, with the speed of rotation directly correlating to the flow rate. The hall effect sensor then converts this motion into a pulse-width signal that reflects the flow rate.
By connecting the sensor to a microcontroller, you can easily track the flow of water in applications such as coffee makers, sprinkler systems, and other water-dependent devices. This setup allows for precise control and monitoring of water flow, enhancing efficiency and ensuring the optimal functioning of water-based systems.
Features:
- Analog Sensor
- Accuracy Up to 5%
- Water Proof Sensor
- Standard 1/8″ Nozzle Size
- Max. Supported Water Flow: 10L/Min
Specification:
- Model: YF-S402C
- Type: G3/8
- Input/output size: 15mm
- Operating voltage 5 to 18 V
- Analog Sensor
- Accuracy Up to 5%
- Water Proof Sensor
Package Includes:
1 x Water Flow Sensor (Sea) YFS402C Flowmeter G3/8 0.3- 10L/min 5-18V
Water Flow Sensor (Sea) YF-S402C Flowmeter G3/8 0.3-10L/min Overview
The Water Flow Sensor (Sea) YF-S402C is an inline G3/8″ flowmeter designed to measure liquid flow rates between 0.3 and 10 L/min. It uses a plastic valve body, rotor and hall effect sensor to generate pulse-width signals proportional to water flow, making it ideal for precise monitoring in water management systems.
Key Features of Water Flow Sensor (Sea) YF-S402C Flowmeter G3/8 0.3-10L/min
- G3/8″ threaded ports with 15 mm inlet/outlet for easy integration into standard plumbing
- Flow range from 0.3 to 10 L/min with up to ±5% accuracy
- Wide operating voltage 5–18 V for compatibility with various controllers
- Built-in hall effect sensor produces clean pulse output for digital counting
- Fully waterproof housing suitable for indoor and outdoor installations
- Fast shipping across India—genuine Sea YF-S402C flowmeters in stock at Zbotic
Applications and Use Cases
- Monitoring water consumption in reverse osmosis and filtration systems
- Irrigation control for hydroponic or drip-irrigation setups
- Flow measurement in beverage dispensers and coffee machines
- Aquarium and fish-tank pump flow monitoring
- Status feedback in pump-driven cooling circuits
- Liquid dosing and batching for chemical processing
How to Use Water Flow Sensor (Sea) YF-S402C Flowmeter G3/8 0.3-10L/min
Install the YF-S402C inline with the flow direction arrow, secure the G3/8″ ports with appropriate fittings, and connect the red and black wires to a 5–18 V DC supply. Tie the output wire to a microcontroller digital input configured for pulse counting. Calibrate the flow rate by counting pulses over time and applying the manufacturer’s pulses-per-liter factor to convert to L/min.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What is the flow rate range and accuracy of the YF-S402C?
This sensor measures between 0.3 L/min and 10 L/min with an accuracy up to ±5%, making it suitable for applications requiring reliable mid-range water flow monitoring.
How do I interface the YF-S402C with a microcontroller?
Connect the sensor’s pulse output to a digital interrupt pin on your microcontroller. Supply the module with 5–18 V DC, count the pulses over a set time interval, and apply the calibration factor to obtain flow rate in liters per minute.
Can I use this sensor outdoors or in humid environments?
Yes, the YF-S402C features a waterproof plastic body and sealed hall effect sensor, allowing for installation in both indoor and outdoor water systems without risk of moisture damage.
Flex Sensor Glove: Gesture Recognition Project Build with Arduino
A flex sensor glove that can recognise hand gestures is one of the most impressive and practical wearable...
Read More →
GPS vs GLONASS vs Galileo: Which Satellite System Is Best?
Table of Contents Overview: What Are These Satellite Systems? GPS: The American Pioneer GLONASS: Russia's Answer to GPS...
Read More →
Best Logic Analyzers for Arduino Debugging India 2026
You've connected a DHT22 sensor to your Arduino, uploaded the sketch, opened Serial Monitor — and get nothing...
Read More →Technical Specifications
| Model | YF-S402C |
|---|---|
| SKU | AI3545 |
| Weight | 0.04095 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Water Flow Sensor (Sea) YF-S402C Flowmeter G3/8 0.3-10L/min 5-18V is a versatile flow used across a wide range of applications including water quality monitoring, hydroponics, aquariums, industrial water treatment, and smart irrigation.
Common use cases:
- Measuring TDS in a hydroponic nutrient solution
- Monitoring pH in an aquarium
- Tracking water flow in an irrigation system
This product is ideal for aquaculture professionals, hydroponic growers, and environmental engineers.
Technical Tip: Calibrate pH and TDS sensors regularly with standard solutions. Keep probe tips clean and submerged when not in use.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Yash Patel (verified owner) –
Superb Water Flow Sensor YF-S402C Flowmeter G3/8! Using it in my environmental monitoring system. Very reliable data.
Vidya Dhillon (verified owner) –
Very satisfied with this Water Flow Sensor YF-S402C Flowmeter G3/8. Library support is good and it’s easy to interface.
Dinesh Chauhan (verified owner) –
Good Water Flow Sensor YF-S402C Flowmeter G3/8. Works as described. Calibration needed some patience but results are good.
Sarthak Bhat (verified owner) –
Very satisfied with this Water Flow Sensor YF-S402C Flowmeter G3/8. Library support is good and it’s easy to interface.
Paras Rao (verified owner) –
Love this Water Flow Sensor YF-S402C Flowmeter G3/8. Response time is fast and readings are stable.
Divyansh Kapoor (verified owner) –
Okay Water Flow Sensor YF-S402C Flowmeter G3/8. Had to add a capacitor to stabilize readings. Works now.
Vinay Dhillon (verified owner) –
Pretty good Water Flow Sensor YF-S402C Flowmeter G3/8. Documentation could be better but the sensor itself is solid.
Lakshya Mishra (verified owner) –
Decent Water Flow Sensor YF-S402C Flowmeter G3/8 for the price. Requires proper wiring but works well once set up.
Naman Batra (verified owner) –
Love this Water Flow Sensor YF-S402C Flowmeter G3/8. Response time is fast and readings are stable.
Nikhil Deshpande (verified owner) –
This Water Flow Sensor YF-S402C Flowmeter G3/8 is a must-have for sensor projects. Plug and play with Arduino.
Harsh Mittal (verified owner) –
Excellent sensitivity and range on this Water Flow Sensor YF-S402C Flowmeter G3/8. Works better than I expected.
Ishaan Verma (verified owner) –
This Water Flow Sensor YF-S402C Flowmeter G3/8 works great with Arduino. Easy to wire up and code.
Neha Chauhan –
Decent Water Flow Sensor YF-S402C Flowmeter G3/8 for the price. Requires proper wiring but works well once set up.
Mayank Kamath –
Outstanding accuracy from this Water Flow Sensor YF-S402C Flowmeter G3/8. Compared with a professional instrument, readings match closely.
Krishna Ghosh (verified owner) –
Very satisfied with this Water Flow Sensor YF-S402C Flowmeter G3/8. Library support is good and it’s easy to interface.
Mayank Menon (verified owner) –
Good quality Water Flow Sensor YF-S402C Flowmeter G3/8. Some variation in readings but within acceptable range.