Name: 8 Channel 5V Solid State Relay Module Board OMRON for Arduino
Brand: Arduino
SKU: AI2404
Price: 1043.12 INR
Availability: InStock
Rating: 4.65 (20 reviews)

This is the 5V variant of the 8 Channel 5V Solid State Relay Module Board OMRON for Arduino in Relay Modules. Available at ₹1,043.12 (₹884.00 + GST) with free shipping across India.

Looking for 5v Module Arduino? 8 Channel 5V Solid State Relay Module Board OMRON for Arduino is available at Zbotic with fast shipping across India.

8 Channel 5V Solid State Relay Module Board OMRON for Arduino

This is 8 Channel 5V Solid State Relay Module Board OMRON for Arduino. A solid state relay (SSR) is just what it sounds like; an IC that acts like a mechanical relay. They allow you to control high-voltage AC loads from lower voltage DC control circuitry. They accomplish this by using infrared light as the ‘contact,’ a solid-state relay is really just an IR LED and a photo triac sealed up into a little box. Solid state relays have several advantages over mechanical relays.

A Solid State Relay is similar to a mechanic relay where it can be controlled through a digital signal. Solid State Relay generates no noise and has a much longer lifespan in compared to the traditional mechanic relay.

One such advantage is that they can be switched by a much lower voltage and at a much lower current than most mechanical relays. Also, because there are no moving contacts, solid state relays can be switched much faster and for much longer periods without wearing out.

Input Parts :

DC: connected to VCC (Supply power according to relay voltage)
DC-: connected to GND.
IN1: CH1 Signal triggering the end of 1-channel relay module (active at the high level)
IN2: CH2 Signal triggering the end of 2-channel relay module (active at the high level)
IN3: CH3 Signal triggering the end of 3-channel relay module (active at the high level)
IN4: CH4 Signal triggering the end of 4-channel relay module (active at the high level)
IN5: CH5 Signal triggering the end of 5-channel relay module (active at the high level)
IN6: CH6 Signal triggering the end of 6-channel relay module (active at the high level)
IN7: CH7 Signal triggering the end of 7-channel relay module (active at the high level)
IN8: CH8 Signal triggering the end of 8-channel relay module (active at the high level)

Operating current:

1 WAY:13.8mA
2 WAY: 26.8mA
3 WAY: 37mA
4 WAY: 48mA
5 WAY: 59mA
6 WAY: 70mA
7 WAY: 81mA
8 WAY: 90mA

Features:

8-channel 2 AMP Solid State Relay board.
Control 8 loads of up to 2 amps each at 120 V or 240 V AC.
Good for lighting, Holiday displays etc.
Has been assembled, and the electrical test passed.
Led indicator for each relay.
Use it to control various appliances and other equipment with large current.
It can be controlled directly by Microcontroller.
Input control signal voltage.
1. 0-0.5V low stage SSR is OFF
2. 0.5V – 2.5V (unknown state).
3. 2.5-20V high stage SSR is ON

Specification:

Zero Cross	Yes
Length (mm):	130
Width (mm):	62
Height (mm):	22
Weight (g):	70

Package Includes:

1 x 8 Channel 5V Solid State Relay Module Board OMRON for Arduino.

8 Channel 5V Solid State Relay Module Board OMRON for Overview

The 8 Channel 5V Solid State Relay Module Board OMRON for Arduino is an expansion board equipped with eight OMRON solid state relays. It enables you to switch AC loads up to 2 A (100–240 VAC) per channel using 3.3–5 V logic signals, making it ideal for Arduino and other microcontroller projects.

Key Features of 8 Channel 5V Solid State Relay Module Board OMRON for

Eight OMRON solid state relays rated 2 A at 100–240 VAC (50/60 Hz)
TTL-compatible trigger inputs (3.3 V–5 V) with 2 mA drive current
5 V DC supply (160 mA typical) for relay operation
Zero-cross turn-on for reduced EMI and smooth switching
LED indicators for each channel to monitor relay state
Genuine components and fast shipping from Zbotic across India

Applications and Use Cases

Controlling holiday and architectural lighting sequences
Switching small AC motors and fans in home automation
Automating aquarium heaters and temperature control devices
Driving AC heating elements in DIY temperature rigs
Managing multiple power outlets for lab or workshop setups
Programming timed on/off cycles for signage or display lighting

How to Use 8 Channel 5V Solid State Relay Module Board OMRON for

Power the board with a regulated 5 V DC supply, connect each AC load between the relay’s output terminals, then tie the board’s ground to your microcontroller. Drive each input pin with a digital HIGH signal (3.3–5 V) to activate its corresponding relay. The on-board LEDs will light to indicate active channels, and zero-cross switching ensures smooth, low-noise operation.

Why Buy from Zbotic?

Genuine Products: All items sourced from authorized distributors
Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
Free Shipping: Free delivery on qualifying orders
COD Available: Cash on Delivery, UPI, cards, net banking
Technical Support: Expert help for setup and troubleshooting
Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

What AC voltage and current can each channel handle?

Each OMRON solid state relay channel can switch 100–240 VAC at up to 2 A, suitable for lighting, heaters, and small motors.

Can I drive the inputs from a 3.3 V microcontroller?

Yes. The module’s trigger voltage range of 3.3–5 V and low 2 mA input current make it compatible with 3.3 V and 5 V logic devices.

Do I need to add any external components for safe operation?

No additional components are required for basic switching. For inductive loads, however, adding snubber circuits or fuses on the AC side is recommended to protect against voltage spikes.

Tags: 5V Arduino Buy Online India Relay Relay Module Solid State Relay SSR Zbotic

Technical Specifications

Brand	Arduino
Operating Voltage	5V
Channels	8-channel
SKU	AI2404
Weight	0.11115 kg
Availability	In Stock

Applications & Use Cases

The 8 Channel 5V Solid State Relay Module Board OMRON for Arduino is a versatile relay modules used across a wide range of applications including home automation, industrial control, IoT projects, Arduino/Raspberry Pi interfacing, and motor control.

Common use cases:

Switching high-voltage AC appliances with a microcontroller
Building a smart home relay board
Automating irrigation pumps in agriculture

This product is ideal for electronics engineers, IoT developers, and automation hobbyists.

Technical Tip: Use optocoupler-isolated relay modules to protect your microcontroller. Match relay coil voltage to your MCU logic level (3.3V or 5V).

Shipping & Delivery

Free shipping on orders above ₹999 across India
Dispatched within 1-3 business days
Expected delivery: 3-7 business days depending on location
Secure packaging to ensure safe transit of electronic components
Genuine Arduino product sourced from authorized channels

Weight	0.11115 kg

15 Days Warranty

Please note that this item is only covered by a standard supplier warranty against manufacturing defects for a period of 15days from the time of delivery. It is important to understand that only manufacturing defects are covered under this warranty, and any other issues will not be considered for reimbursement or replacement. We strongly advise inspecting the product upon delivery to ensure it meets your expectations. In case of any manufacturing defects, we guarantee reimbursement or replacement.