Looking for Dji Naza Lite Controller? DJI Naza M Lite Multi-Rotor Flight Controller without GPS is available at Zbotic with fast shipping across India.
DJI Naza M Lite Multi-Rotor Flight Controller without GPS
For those just starting out, DJI now offers the most cost-effective solution with the DJI Naza-M Lite Multi-Rotor Flight Controller system. This simplified version of the NAZA-M maintains the same high reliability and stability. Its innovative all-in-one design streamlines installation while reducing space and weight.
The compact main controller houses inner damping, controllers, a 3-axis gyroscope, a 3-axis accelerometer, and a barometer. Capable of measuring flying altitude and attitude, it is suitable for autopilot and automatic control.
The advanced attitude stabilization algorithm not only continues DJI’s legacy of exceptional flight stability but also enhances manoeuvrability. It offers hobbyists a more flexible and stable flight experience.
How do DJI Naza M lite works and mode:
It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically to the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure.
In-home lock flying, the forward direction is the same as the direction from home point to multi-rotor. See the following figures (Mode 2).
Naza-M Lite for multi-motors is an autopilot system designed for serious multi-rotor enthusiasts providing excellent self-levelling and altitude holding, which completely takes the stress out of flying RC multi-rotors for both professional and hobby applications. NAZA-M LITE can be installed in a variety of models from quad-rotor to Hexa-rotor.
It is the most cost-effective entry-level flight controller for lightweight multi-rotor, designed for aero model hobbyists.
Features:
- All-in-One Design
- Accurate Position Hold for GPS
- Low Voltage Protection
- 6 Supported Multi-rotor Types
- Advanced Attitude Stabilize Algorithm
- Intelligent Orientation Control (IOC)
- Motor Arm and Motor Dis-arm
- Built-in Gimbal Stabilization Function
- Multiple Flight Control Mode/Intelligent Switching
- Failsafe Mode
- Support Futaba S-Bus and PPM Receiver
- Remote Adjustment
- Supported Multi-Rotor: Quad-rotor I4, X4, Hex-rotor I6, X6, IY6, Y6
- Supported ESC Output: 400Hz refresh frequency
- Recommended Transmitter: PCM or 2.4GHz with a minimum of 4 channels
- Assistant Software System Requirement: Windows XP sp3/Windows 7/Windows 8
Flight Performance:
- Hovering Accuracy (GPS Mode): Vertical: +/-0.8m, Horizontal: +/-2.5m
- Max Yaw Angular Velocity: 200°/s
- Max Tilt Angle: 45°
- Ascent/Descent: +/-6m/s
Package Includes:
1 x DJI Naza Controller Unit.
1 x DJI Remote LED module for Coding and Interfacing with PC.
1x DJI Power Module.
1 x DJI USB to MicroUSB Cable (18 inches).
8 x Servo Cables (5 Inches Each).
Note: Package does not include the GPS module, you have to purchase it separately. Get it with links given below.
DJI Naza M Lite Multi-Rotor Flight Controller without GPS Overview
The DJI Naza M Lite Multi-Rotor Flight Controller without GPS is an all-in-one stabilization system designed for entry-level and hobbyist multicopter builds. It integrates a 3-axis gyroscope, 3-axis accelerometer and barometer to manage attitude stabilization and altitude estimation without relying on GPS.
Key Features of DJI Naza M Lite Multi-Rotor Flight Controller without GPS
- All-in-one compact design housing inner damping, 3-axis gyroscope, 3-axis accelerometer and barometer
- Wide input voltage range of 4.8 V–5.5 V (recommended from 2S to 6S LiPo battery)
- Low power consumption: max 1.5 W (0.3 A @ 5 V), typical 0.6 W (0.12 A @ 5 V)
- Operating temperature from −10 °C to +50 °C for reliable flight in varied conditions
- Supports up to 400 Hz ESC refresh frequency for smooth motor response
- Genuine product with fast shipping from Zbotic across India
Applications and Use Cases
- DIY quadcopter or hexacopter projects for beginners and enthusiasts
- Attitude-stabilized indoor flying where GPS signals are unavailable
- Lightweight aerial platforms for FPV racing and freestyle flights
- Educational UAV programs requiring basic autopilot functionality
- Prototype development of custom multicopter frames
How to Use DJI Naza M Lite Multi-Rotor Flight Controller without GPS
Mount the Naza M Lite on your airframe using the supplied damping plate, connect power from a regulated 5 V BEC (2S–6S LiPo input), hook up ESC signal cables and your radio receiver, then calibrate accelerometers and barometer via DJI Assistant software on a PC. After calibration, perform motor tests, fine-tune controller gains if needed, and you’re ready to fly.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Does the Naza M Lite support external GPS modules?
No. The Naza M Lite version omits GPS functionality. It relies solely on its internal barometer and inertial sensors for altitude and attitude stabilization.
What is the recommended battery voltage for powering this controller?
The controller’s recommended power input is 4.8 V to 5.5 V, typically supplied by a 2S to 6S LiPo battery through an appropriate BEC or power distribution board.
How do I calibrate the Naza M Lite after installation?
Use the DJI Assistant desktop application: connect the controller via USB, follow on-screen prompts to calibrate accelerometers and barometer while the unit is level, then save settings before test-flying.
Drone LiDAR Sensor Guide: Obstacle Avoidance & Mapping
Drone LiDAR Sensor Guide: Obstacle Avoidance and Precision Mapping LiDAR — Light Detection and Ranging — is one...
Read More →
Drone PDB vs AIO: Power Distribution Board Guide
Table of Contents Understanding Drone PDB vs AIO Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation...
Read More →
Weather-Resistant Drone Components for Indian Farming
Indian agriculture demands weather-resistant drone parts for farming operations that can withstand extreme heat, monsoon humidity, dust storms,...
Read More →Technical Specifications
| Brand | DJI |
|---|---|
| SKU | AI1215 |
| Weight | 0.05 kg |
| Availability | Out of Stock |
Applications & Use Cases
The DJI Naza M Lite Multi-Rotor Flight Controller without GPS is a versatile flight controller & accessories used across a wide range of applications including autonomous drones, FPV racing quadcopters, agricultural drones, and surveying and mapping platforms.
Common use cases:
- Central brain for drone stabilization and navigation
- GPS waypoint missions for surveying
- Acro mode flying for FPV freestyle
This product is ideal for drone builders requiring precise flight control.
Technical Tip: F4 processors are good for basic builds; F7 or H7 recommended for advanced features. Ensure firmware compatibility (Betaflight, ArduPilot, iNAV).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine DJI product sourced from authorized channels
Aryan Mehta (verified owner) –
Nice DJI Naza M Lite Multi-Rotor Flight, does the job. Delivery took a couple of extra days but product is solid.
Ashish Singh –
Outstanding DJI Naza M Lite Multi-Rotor Flight! Installed it on my racing quad and the performance is amazing.
Varun Mehta (verified owner) –
Been using this DJI Naza M Lite Multi-Rotor Flight for 3 months now, zero issues. Great product.
Himanshu Goyal (verified owner) –
Received the DJI Naza M Lite Multi-Rotor Flight in great condition. Testing done, everything works perfectly.
Sakshi Hegde (verified owner) –
My 5th order from Zbotic. This DJI Naza M Lite Multi-Rotor Flight is excellent as always. Totally reliable store.
Kartik Rao (verified owner) –
Using this DJI Naza M Lite Multi-Rotor Flight in my FPV drone build. Quality is top notch. Very happy with the purchase.
Sanjay Negi (verified owner) –
Outstanding DJI Naza M Lite Multi-Rotor Flight! Installed it on my racing quad and the performance is amazing.
Dev Verma (verified owner) –
This DJI Naza M Lite Multi-Rotor Flight exceeded my expectations. Installed it yesterday and took a successful test flight today.
Sandhya Banerjee (verified owner) –
Received the DJI Naza M Lite Multi-Rotor Flight in great condition. Testing done, everything works perfectly.
Gaurav Bisht (verified owner) –
Perfect for my agriculture drone project. This DJI Naza M Lite Multi-Rotor Flight handles the weight effortlessly.
Darshan Gupta –
Very good quality DJI Naza M Lite Multi-Rotor Flight. I’ve been building drones for 2 years now and this is one of the best I’ve used.
Arun Patel (verified owner) –
Very good quality DJI Naza M Lite Multi-Rotor Flight. I’ve been building drones for 2 years now and this is one of the best I’ve used.
Atharv Desai –
Very impressed with this DJI Naza M Lite Multi-Rotor Flight. My drone’s performance improved noticeably.
Vipin Rathore (verified owner) –
Top quality DJI Naza M Lite Multi-Rotor Flight. I’m a regular customer of Zbotic and they never disappoint.