M3 Anti-Vibration fixed Screws are the pack of 4 screws that can be used to absorb and reduce vibrating shock from the quadcopter frame to the flight controller board, to protect it from damage as well as provides tight-fitting on the frame.
Features:
- Length: 6mm base/ 10mm screw length
- Screws are easy to install, perfect fit, and significant vibration elimination.
specification-
| Quantity | 4 in pack |
| Screw Diameter | 2.8 mm |
| Screw Height | 6 mm Base Length, 10 mm Screw Length |
Package Includes:
1 x M3*6+10 Shock Absober Screws (pack of 4)
M3*6+10 Shock Absober Screws-4pcs Overview
The M3*6+10 Shock Absober Screws are a set of four vibration-damping fasteners designed to secure flight controllers and other sensitive electronics within a quadcopter or drone frame. Each screw features a 6 mm rubber base and a 10 mm metal shaft to isolate shocks and protect circuit boards from frame-induced vibrations.
Key Features of M3*6+10 Shock Absober Screws-4pcs
- Anti-vibration design with rubber base and M3 threaded steel shaft
- 6 mm rubber height for effective shock absorption, 10 mm screw length for secure mounting
- 2.8 mm shaft diameter ensures compatibility with standard M3 mounting holes
- Pack of 4 screws, ideal for one flight controller or small electronics assembly
- Easy to install and remove, providing a snug fit without loosening during flight
- Genuine product and fast shipping from Zbotic for prompt delivery
Applications and Use Cases
- Mounting flight controller boards in FPV racing drones to reduce frame vibrations
- Securing mini-controllers and sensor boards in DIY multirotor builds
- Isolating vibration-sensitive components in aerial photography rigs
- Attaching small PCBs in robotics projects where shock damping is needed
- Protecting onboard electronics in hobbyist quadcopters and hexacopters
How to Use M3*6+10 Shock Absober Screws-4pcs
Insert each screw’s rubber base into the designated standoff hole on your drone frame, align the flight controller mounting holes, and thread the 10 mm metal shaft through the controller pad. Hand-tighten until the rubber compresses slightly to absorb vibration; avoid over-torquing to maintain isolation performance.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Are these screws compatible with all M3 flight controller mounting patterns?
Yes, the M3*6+10 Shock Absober Screws fit any standard M3 hole layout, including common 20×20 mm and 30×30 mm flight controller boards.
Do I need nuts or washers with these shock absorber screws?
No additional nuts or washers are required. The integrated rubber base holds the board securely and provides the damping effect without loose hardware.
Can these screws withstand outdoor and high-vibration conditions?
Absolutely. The rubber base is designed to flex and absorb continuous vibrations encountered during aggressive flying and outdoor use, protecting your electronics from damage.
OpenPilot vs ArduCopter: Legacy and Modern Flight Controller Stacks Compared
If you've been building drones for more than a few years, you've likely encountered both OpenPilot and ArduCopter....
Read More →
How to Build a Long Range FPV Wing (DIY Guide India)
How to Build a Long Range FPV Wing (DIY Guide India) Long range FPV fixed wing flying is...
Read More →
BEC and Voltage Regulator on Drones: Power Distribution Guide
Table of ContentsWhat is a BEC? Understanding Battery Eliminator CircuitsLinear vs Switching BEC: Which One for Your Drone?Power...
Read More →Technical Specifications
| Package Quantity | 4 pcs |
|---|---|
| SKU | AI4397 |
| Weight | 0.0 kg |
| Availability | In Stock |
Applications & Use Cases
The M3*6+10 Shock Absober Screws-4pcs is a versatile flight controller & accessories used across a wide range of applications including autonomous drones, FPV racing quadcopters, agricultural drones, and surveying and mapping platforms.
Common use cases:
- Central brain for drone stabilization and navigation
- GPS waypoint missions for surveying
- Acro mode flying for FPV freestyle
This product is ideal for drone builders requiring precise flight control.
Technical Tip: F4 processors are good for basic builds; F7 or H7 recommended for advanced features. Ensure firmware compatibility (Betaflight, ArduPilot, iNAV).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Shreyas Rao (verified owner) –
Superb M3*6+10 Shock Absober Screws-4pcs! Built my first drone with this and it performed beyond expectations.
Swati Naidu (verified owner) –
Outstanding M3*6+10 Shock Absober Screws-4pcs! Installed it on my racing quad and the performance is amazing.
Chirag Banerjee (verified owner) –
This M3*6+10 Shock Absober Screws-4pcs is exactly what I needed for my drone. Works perfectly, very reliable.
Ashwin Grewal (verified owner) –
Nice M3*6+10 Shock Absober Screws-4pcs, does the job. Delivery took a couple of extra days but product is solid.
Arnav Vohra (verified owner) –
This M3*6+10 Shock Absober Screws-4pcs is exactly what I needed for my drone. Works perfectly, very reliable.
Vaishali Modi (verified owner) –
Excellent M3*6+10 Shock Absober Screws-4pcs! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Gauri Yadav –
Using this M3*6+10 Shock Absober Screws-4pcs in my hexacopter. Smooth operation and excellent thrust.
Pankaj Shetty (verified owner) –
Decent M3*6+10 Shock Absober Screws-4pcs. Took some effort to set up but working now.
Kavya Dhawan –
This M3*6+10 Shock Absober Screws-4pcs is exactly what I needed for my drone. Works perfectly, very reliable.
Meera Menon (verified owner) –
Amazing build quality! This M3*6+10 Shock Absober Screws-4pcs is sturdy and lightweight at the same time.
Sarika Bhat –
Great quality M3*6+10 Shock Absober Screws-4pcs. Perfect specs for my drone project. Fast delivery too!
Hitesh Rao –
Great M3*6+10 Shock Absober Screws-4pcs for beginners and professionals alike. Highly recommended for drone enthusiasts.
Suresh Desai –
Using this M3*6+10 Shock Absober Screws-4pcs in my FPV drone build. Quality is top notch. Very happy with the purchase.
Sarthak Tandon (verified owner) –
Top quality M3*6+10 Shock Absober Screws-4pcs. I’m a regular customer of Zbotic and they never disappoint.
Ravi Panchal (verified owner) –
Excellent product for the price. My drone flies smoothly with this M3*6+10 Shock Absober Screws-4pcs. Highly recommended!
Vidya Kamath (verified owner) –
Using this M3*6+10 Shock Absober Screws-4pcs in my FPV drone build. Quality is top notch. Very happy with the purchase.
Shreyas Srivastava (verified owner) –
Good quality M3*6+10 Shock Absober Screws-4pcs. Minor scratches on arrival but functionally perfect.
Paras Shetty (verified owner) –
Very impressed with this M3*6+10 Shock Absober Screws-4pcs. My drone’s performance improved noticeably.
Nitin Joshi (verified owner) –
Good quality M3*6+10 Shock Absober Screws-4pcs. Minor scratches on arrival but functionally perfect.
Akshat Saxena (verified owner) –
Excellent product for the price. My drone flies smoothly with this M3*6+10 Shock Absober Screws-4pcs. Highly recommended!
Isha Solanki (verified owner) –
Outstanding M3*6+10 Shock Absober Screws-4pcs! Installed it on my racing quad and the performance is amazing.
Arnav Hegde –
Nice M3*6+10 Shock Absober Screws-4pcs, does the job. Delivery took a couple of extra days but product is solid.
Rahul Tiwari (verified owner) –
Outstanding M3*6+10 Shock Absober Screws-4pcs! Installed it on my racing quad and the performance is amazing.
Sanya Patel (verified owner) –
Good product overall. My drone is flying well with this M3*6+10 Shock Absober Screws-4pcs. Satisfied with the purchase.
Neeraj Arora (verified owner) –
This M3*6+10 Shock Absober Screws-4pcs exceeded my expectations. Installed it yesterday and took a successful test flight today.
Neeraj Tandon (verified owner) –
Great quality M3*6+10 Shock Absober Screws-4pcs. Perfect specs for my drone project. Fast delivery too!
Pallavi Iyer –
Decent M3*6+10 Shock Absober Screws-4pcs for the price. Using it in my quadcopter, performs well overall.