This is the Black variant of the JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO F411 Flight Controller Deluxe in Flight Controller & Accessories. Available at ₹3,093.00 (₹2,621.19 + GST) with free shipping across India.
Looking for F411 Controller? JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO F411 Flight Controller Deluxe is available at Zbotic with fast shipping across India.
Product Description:
This is a JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO F411 Flight Controller Deluxe.
JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro Flight Controller ARCO was designed to give awesome flight performance based on tried and tested sensors whilst also providing unparalleled I/O capabilities in a small and extremely lightweight form-factor using a next-generation CPU
A flight controller (FC) is a small circuit board of varying complexity. Its function is to direct the RPM of each motor in response to input. A command from the pilot for the multi-rotor to move forward is fed into the flight controller, which determines how to manipulate the motors accordingly.
Every part of the drone is controlled by a flight controller. It moves the drone by changing the RPM of the motors. It is a control system that takes input from the sensors and makes the drone fly accordingly. This is a small computer board with various sensors which understand the movement of the craft. It has sensors like Gyroscope, Accelerometer, Barometer, and Magnetometer. According to the signal comes from the transceiver , it controls the motors and craft.
The board is rock solid and gives great performance with the HAKRC 20 A ESC, except that you have to switch the motors 1 & 2 to get the motor connections right. The barometer does not work great. Even though I packed a sponge above it, it starts bouncing hard when I switch on ALT hold mode. The OSD is the best and it works flawlessly, as does the VCC feed, whcih gives you the actual battery voltage reading through betalight. Else all great, good light and powerful board for a micro build.
Connection Diagram:
Board Difference:
Features:
- Compact In size
- Color: Black
- Easy to install
- The high-performance flight controller module
- very used to product
- Dail 150, Dail 300, Dail 600
Note: The BMI 270 gyroscope only supports 4.3.0 firmware. Please do not flash the other version’s firmware.
Package Includes:
1 x JHEMCU F4 NOXE V3 Flight Controller
About F411 Controller
JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO F411 Flight Controller Deluxe is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Generic, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Generic
- SKU: AI1505
- Category: Flight Controller & Accessories
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about F411 Controller and other products.
Applications
F411 Controller can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your F411 Controller today and start building.
JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO Overview
The JHEMCU F4 NOXE V3 is a deluxe F411 flight controller designed for multirotor drones running 2S to 6S LiPo batteries. It integrates a high-performance STM32F411 MCU, BMI270 gyro/accelerometer, AT7456E OSD chip, onboard barometer and BlackBox logging to deliver precise flight control, video overlay and data recording.
Key Features of JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO
- STM32F411CEU6 CPU at 100 MHz for responsive flight performance
- BMI270 gyroscope and accelerometer with built-in barometer for stable altitude hold
- Dual BEC outputs (5 V and 10 V) to power camera and video transmitter
- AT7456E On-Screen Display (OSD) chip for in-flight telemetry overlay
- Onboard BlackBox flash logging for tuning and flight data analysis
- Supports 2–6S LiPo input and all common receiver protocols
- Genuine JHEMCU hardware with fast shipping from Zbotic across India
Applications and Use Cases
- FPV freestyle quads requiring quick response and onboard OSD
- Long-range or GPS-assisted drones benefiting from barometer altitude hold
- Racing builds where accurate BlackBox logs speed up PID tuning
- Aerial videography platforms needing dual BEC outputs for camera/VTX power
- Custom drone prototypes integrating multiple sensors and telemetry
- Educational robotics projects focused on flight control and data recording
How to Use JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO
Mount the flight controller on vibration-damping pads in your frame, solder battery leads to the 2–6S input pads and connect ESC signal wires to motor outputs. Wire your receiver to the UART ports and attach camera/VTX to the 5 V/10 V BEC pads. Plug into your PC via micro-USB, open Betaflight Configurator to flash firmware, configure the OSD in the OSD tab, calibrate sensors and perform a motor test before maiden flight.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What battery voltage range does the F4 NOXE V3 support?
This flight controller accepts a 2S to 6S LiPo input, allowing you to use popular 4S and 6S setups for higher power builds.
How do I configure the onboard OSD?
After installing Betaflight firmware via USB, open Betaflight Configurator, navigate to the OSD tab, enable and position telemetry items, then save. The AT7456E chip overlays real-time data on your FPV feed.
Does this controller include BlackBox logging?
Yes, the JHEMCU F4 NOXE V3 has onboard BlackBox flash memory. Enable logging in Betaflight to record flight data, then analyze PID performance and sensor readings for optimal tuning.
FPV Camera Comparison: DJI O3 vs Walksnail vs Analog — Which Is Best?
Table of ContentsIntroductionUnderstanding FPV Video SystemsAnalog FPV: The Classic ChoiceDJI O3 Air Unit: The Premium Digital OptionWalksnail Avatar:...
Read More →
Agriculture Drone Parts List: Complete Buying Guide for India
The demand for agriculture drone parts in India has exploded as farmers increasingly adopt drone-based spraying to cut...
Read More →
Long Range Cruiser Drone: 7-Inch Build for Exploration
Table of Contents Understanding Long Range Cruiser Drone Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation...
Read More →Technical Specifications
| Voltage Range | 5V - 10V |
|---|---|
| Cell Configuration | 6S |
| Package Quantity | 2 pcs |
| Color | Black |
| SKU | AI1505 |
| Availability | Out of Stock |
Applications & Use Cases
The JHEMCU F4 NOXE V3 5V 10V BEC OSD Baro BlackBox 2-6S LIPO F411 Flight Controller Deluxe is a versatile flight controller & accessories used across a wide range of applications including autonomous drones, FPV racing quadcopters, agricultural drones, and surveying and mapping platforms.
Common use cases:
- Central brain for drone stabilization and navigation
- GPS waypoint missions for surveying
- Acro mode flying for FPV freestyle
This product is ideal for drone builders requiring precise flight control.
Technical Tip: F4 processors are good for basic builds; F7 or H7 recommended for advanced features. Ensure firmware compatibility (Betaflight, ArduPilot, iNAV).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
