This is the Blue variant of the Esun PLA-Matte Dual filament, 1.75mm, blue green, 1kg/roll, with plastic roll in eSUN ePLA-Matte Filament, 3D Printer Filaments, ESUN Filaments, eSun PLA Filament. Available at ₹1,646.10 (₹1,395.00 + GST) with free shipping across India.
Description
The PLA-Matte Dual filament from eSUN combines aesthetic appeal with printability. Unlike standard single-color filaments, this version features a two-color design during extrusion, which gives your 3D prints a subtle, layered visual effect. The matte surface reduces sheen, offering a more refined, tactile finish that downplays visible layer lines.
This filament retains the favorable printing characteristics of PLA: it’s user-friendly, doesn’t usually require an enclosed chamber, and exhibits low warping and shrinkage. It’s suitable for printing large models, decorative parts, cosplay props, or prototypes where visual quality is important. The support material adheres sufficiently but detaches cleanly, enabling smooth surfaces once supports are removed.
With its balanced combination of visuals and ease of use, PLA-Matte Dual is a strong choice for hobbyists and creators aiming for both form and function.
Features
- Two-color co-extruded filament for a layered, textured look
- Matte / non-glossy finish that conceals layer lines
- Low shrinkage and minimal warping during printing
- Support removal is clean and does not damage surfaces
- Strong, consistent filament that resists breaking
- Wide selection of color pair combinations
- Good for large prints and visual models
Specifications:
| Parameter | Detail |
|---|---|
| Material | PLA (Matte Dual formulation) |
| Color Design | Dual-color / co-extruded |
| Diameter | 1.75 mm |
| Net Weight | 1 kg per spool |
| Density | ~1.174 g/cm³ |
| Melt Flow Index | 2.1 (190 °C / 2.16 kg) |
| Heat Distortion Temperature | 54 °C (0.45 MPa) |
| Tensile Strength (Z direction) | ~13.58 MPa |
| Elongation at Break (Z) | ~0.39 % |
| Flexural Strength (XY) | ~56.72 MPa |
| Flexural Modulus (XY) | ~2786.4 MPa |
| IZOD Impact Strength (XY) | ~3.41 kJ/m² |
| Recommended Extruder Temp | 215 – 230 °C |
| Recommended Bed Temp | 45 – 60 °C |
| Fan / Cooling | 100 % |
| Max Print Speed | < 200 mm/s |
| Heated Bed Required | Optional (depending on printer setup) |
Package Includes:
- 1 x Esun PLA-Matte Dual filament, 1.75mm, blue green, 1kg/roll, with plastic roll
Marlin 2.0 Firmware Configuration: All Options Explained
Table of ContentsWhat is Marlin Firmware?Getting Started: Tools and SetupConfiguration.h: Essential SettingsStepper Motor and Driver ConfigurationEndstops and Bed...
Read More →
3D Print RC Car Body: Custom Shell Design
Table of Contents Designing RC Car Bodies for 3D Printing Material and Colour Selection Split Body Design for...
Read More →
3D Printed Electronics Enclosures: Design Tips for Makers
Table of Contents Why 3D Print Your Electronics Enclosures? Material Selection: PLA, PETG, ABS or Nylon? Design Fundamentals...
Read More →Technical Specifications
| Brand | eSun |
|---|---|
| Size | 1.75mm |
| Color | Blue |
| SKU | AI7245 |
| Weight | 1.86 kg |
| Availability | In Stock |
Applications & Use Cases
The Esun PLA-Matte Dual filament, 1.75mm, blue green, 1kg/roll, with plastic roll is a versatile esun epla-matte filament used across a wide range of applications including FDM 3D printing, prototyping, functional parts, artistic models, and educational models.
Common use cases:
- Printing functional mechanical parts
- Creating visual prototypes
- Artistic and decorative printing
This product is ideal for 3D printing enthusiasts and professional prototypers.
Technical Tip: PLA is easiest to print; ABS is stronger but needs an enclosure; PETG balances ease and strength. Store filament in a dry box to prevent moisture absorption.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine eSun product sourced from authorized channels
Sameer Menon (verified owner) –
Very satisfied with this Esun PLA-Matte Dual filament, 1.75mm, blue. My Ender 3 loves this material. Prints beautifully.
Amit Deshpande (verified owner) –
This Esun PLA-Matte Dual filament, 1.75mm, blue is the best I’ve used. Dimensional accuracy is spot on.
Aisha Chatterjee (verified owner) –
Great Esun PLA-Matte Dual filament, 1.75mm, blue. Temperature settings are as recommended. Perfect first layer every time.
Diya Srivastava (verified owner) –
Outstanding quality! This Esun PLA-Matte Dual filament, 1.75mm, blue gives professional-grade results on my printer.
Milan Desai (verified owner) –
Superb Esun PLA-Matte Dual filament, 1.75mm, blue! Been printing for months with this. Consistent diameter throughout.
Nakul Jain –
Perfect Esun PLA-Matte Dual filament, 1.75mm, blue for my 3D printing needs. Spool is well wound, no tangles.
Ojas Agarwal (verified owner) –
Outstanding quality! This Esun PLA-Matte Dual filament, 1.75mm, blue gives professional-grade results on my printer.
Ishan Jain (verified owner) –
Good quality Esun PLA-Matte Dual filament, 1.75mm, blue. Works well with my printer. Bed adhesion is strong.
Chitra Krishnan (verified owner) –
Great quality Esun PLA-Matte Dual filament, 1.75mm, blue. Colors are vibrant and layer adhesion is perfect.
Manish Tiwari (verified owner) –
Good quality Esun PLA-Matte Dual filament, 1.75mm, blue. Works well with my printer. Bed adhesion is strong.
Kunal Arora (verified owner) –
Excellent for functional prints. This Esun PLA-Matte Dual filament, 1.75mm, blue has great strength and flexibility.
Lalit Negi (verified owner) –
This Esun PLA-Matte Dual filament, 1.75mm, blue is the best I’ve used. Dimensional accuracy is spot on.
Aditi Verma (verified owner) –
This Esun PLA-Matte Dual filament, 1.75mm, blue made my prototyping so much easier. Clean prints, no post-processing needed.
Deepak Agarwal –
Perfect Esun PLA-Matte Dual filament, 1.75mm, blue for my 3D printing needs. Spool is well wound, no tangles.
Ankit Modi (verified owner) –
Outstanding quality! This Esun PLA-Matte Dual filament, 1.75mm, blue gives professional-grade results on my printer.
Vipin Panchal –
Excellent Esun PLA-Matte Dual filament, 1.75mm, blue! Print quality is outstanding. No warping or stringing issues.
Akshat Saxena (verified owner) –
Bought multiple colors of this Esun PLA-Matte Dual filament, 1.75mm, blue. All equally good quality. Highly recommended!
Vidya Patil –
Excellent for functional prints. This Esun PLA-Matte Dual filament, 1.75mm, blue has great strength and flexibility.
Raj Dubey (verified owner) –
Great quality Esun PLA-Matte Dual filament, 1.75mm, blue. Colors are vibrant and layer adhesion is perfect.
Amit Nair (verified owner) –
This Esun PLA-Matte Dual filament, 1.75mm, blue made my prototyping so much easier. Clean prints, no post-processing needed.
Piyush Gupta (verified owner) –
My go-to Esun PLA-Matte Dual filament, 1.75mm, blue now. Consistent quality spool after spool. Zbotic is my preferred store.
Arun Chauhan (verified owner) –
Pretty good Esun PLA-Matte Dual filament, 1.75mm, blue. Value for money. Using it for my college 3D printing projects.
Vidya Panchal (verified owner) –
Very satisfied with this Esun PLA-Matte Dual filament, 1.75mm, blue. My Ender 3 loves this material. Prints beautifully.
Arjun Rathore (verified owner) –
This Esun PLA-Matte Dual filament, 1.75mm, blue is amazing. My prints come out smooth and consistent every time.
Krishna Saini (verified owner) –
Great Esun PLA-Matte Dual filament, 1.75mm, blue. Temperature settings are as recommended. Perfect first layer every time.
Shreyas Kamath (verified owner) –
Great Esun PLA-Matte Dual filament, 1.75mm, blue. Temperature settings are as recommended. Perfect first layer every time.
Girish Kohli (verified owner) –
Excellent Esun PLA-Matte Dual filament, 1.75mm, blue! Print quality is outstanding. No warping or stringing issues.
Deepak Vyas –
Excellent Esun PLA-Matte Dual filament, 1.75mm, blue! Print quality is outstanding. No warping or stringing issues.
Nitin Nayak –
Very satisfied with this Esun PLA-Matte Dual filament, 1.75mm, blue. My Ender 3 loves this material. Prints beautifully.
Suresh Srivastava (verified owner) –
Perfect Esun PLA-Matte Dual filament, 1.75mm, blue for my 3D printing needs. Spool is well wound, no tangles.
Pankaj Khanna (verified owner) –
This Esun PLA-Matte Dual filament, 1.75mm, blue is the best I’ve used. Dimensional accuracy is spot on.
Sumit Grewal (verified owner) –
Excellent for functional prints. This Esun PLA-Matte Dual filament, 1.75mm, blue has great strength and flexibility.
Dinesh Tandon (verified owner) –
Great Esun PLA-Matte Dual filament, 1.75mm, blue. Temperature settings are as recommended. Perfect first layer every time.
Om Chatterjee (verified owner) –
Good quality Esun PLA-Matte Dual filament, 1.75mm, blue. Works well with my printer. Bed adhesion is strong.