This is the White variant of the eSUN ePLA-Matte 1.75mm 3D Printing Filament 1kg - Milky White in eSUN ePLA-Matte Filament. Available at ₹1,286.20 (₹1,090.00 + GST) with free shipping across India.
This is a eSUN ePLA-Matte 1.75mm 3D Printing Filament 1kg- Milky White.
PLA-Matte is a cost-effective PLA material that is environmentally friendly and easy to print. PLA-Matte has high rigidity and does not require an enclosure. It has low shrinkage, no warping or cracking, and is suitable for large-scale model printing. The support is easy to peel from the surface with a smooth and flat contact surface. There will be no irritating odour during printing, which is safe and environmentally friendly.
The spool is made by reusing injection mouldings of PETG, ABS, PLA production waste and other industrial waste, and the outer box is made of recyclable paper.
The matte surface is delicate and does not show layer lines. The filament is not easily breakable, which contributes to a smooth printing experience. It can be used for early concept models and rapid prototyping. Low density, ePLA-Matte single-roll consumables are 21% more than other matte PLA product print models.
Note: Image may vary in terms of filament color and spool.
Note: PLA-Matte lines are softer than other lines, so the extruder’s tightness adjustment should not be too tight, in case it affects printing.
Features:
- Environmental friendly
- Cost-effective
- High-speed printing
- Easy to peel off the support
- Excellent printability
- Hard to break
- Matte surface effect
- Low density
- Recommended temperature 215℃
- Printing Speed 40 – 100mm/s
- Recommended Build Surfaces Glass, PEI, BuildTak, Kapton
Specification:
| Color: | Milky White |
|---|---|
| Material: | PLA Matte |
| Filament Diameter (mm): | 1.75 |
| Weight (kg): | 1 |
| Density (g/cm3): | 1.174 |
| Melt Flow Index (g/10min): | 2.1 |
| Tensile Strength (MPa): | 34.56 |
| Elongation at Break (%): | 56.1 |
| Flexural Strength (MPa) | 41.21 |
| Flexural Modulus (MPa) | 1119.41 |
| IZOD Impact (kJ/m2) | 33.15 |
| Heat Distort. (°C,0.45MPa) | 51 |
| Extruder Temperature (°C): | 190 – 230 |
| Heatbed Temperature (°C) | 45 – 60 |
| Fan speed | 100 |
Package Includes:
- 1 x eSUN PLA-Matte 1.75mm 3D Printing Filament 1kg- Milky White
3D Printing Overhangs Without Supports: Bridging Tricks That Actually Work
3D Printing Overhangs Without Supports: Bridging Tricks That Actually Work One of the most satisfying moments in 3D...
Read More →
DIY 3D Printer Enclosure: Build One for Under ₹2000
Table of ContentsWhy Does Your 3D Printer Need an Enclosure?Materials Needed and Where to Buy in IndiaEnclosure Design...
Read More →
PrusaSlicer vs Cura: Best Slicer for Beginners in 2026
Table of ContentsWhy Your Slicer Choice MattersQuick Overview: Cura and PrusaSlicerInterface and Ease of UseFeature ComparisonPrint Quality: Which...
Read More →Technical Specifications
| Brand | eSun |
|---|---|
| Size | 1.75mm |
| Color | White |
| SKU | AI6630 |
| Weight | 1.89 kg |
| Availability | In Stock |
Applications & Use Cases
The eSUN ePLA-Matte 1.75mm 3D Printing Filament 1kg - Milky White is a versatile esun epla-matte filament used across a wide range of applications including FDM 3D printing, prototyping, functional parts, artistic models, and educational models.
Common use cases:
- Printing functional mechanical parts
- Creating visual prototypes
- Artistic and decorative printing
This product is ideal for 3D printing enthusiasts and professional prototypers.
Technical Tip: PLA is easiest to print; ABS is stronger but needs an enclosure; PETG balances ease and strength. Store filament in a dry box to prevent moisture absorption.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine eSun product sourced from authorized channels
Prateek Srivastava (verified owner) –
Bought multiple colors of this eSUN PLA-Matte 1.75mm 3D Printing Filament. All equally good quality. Highly recommended!
Nitin Joshi (verified owner) –
Average eSUN PLA-Matte 1.75mm 3D Printing Filament. Quality is okay but had some inconsistent diameter issues.
Pankaj Sethi –
Excellent eSUN PLA-Matte 1.75mm 3D Printing Filament! Print quality is outstanding. No warping or stringing issues.
Kapil Choudhury –
This eSUN PLA-Matte 1.75mm 3D Printing Filament is amazing. My prints come out smooth and consistent every time.
Rakesh Ghosh (verified owner) –
Outstanding quality! This eSUN PLA-Matte 1.75mm 3D Printing Filament gives professional-grade results on my printer.
Anjali Goyal (verified owner) –
Excellent eSUN PLA-Matte 1.75mm 3D Printing Filament! Print quality is outstanding. No warping or stringing issues.
Advik Kohli (verified owner) –
Nice eSUN PLA-Matte 1.75mm 3D Printing Filament. Colors are good. Spool could be vacuum sealed better.
Ashish Rathore (verified owner) –
This eSUN PLA-Matte 1.75mm 3D Printing Filament is the best I’ve used. Dimensional accuracy is spot on.
Milan Pandey –
Great eSUN PLA-Matte 1.75mm 3D Printing Filament. Temperature settings are as recommended. Perfect first layer every time.
Lakshya Reddy (verified owner) –
This eSUN PLA-Matte 1.75mm 3D Printing Filament is amazing. My prints come out smooth and consistent every time.
Sakshi Goyal (verified owner) –
Love this eSUN PLA-Matte 1.75mm 3D Printing Filament. No clogging issues and the finish is beautiful.
Vipin Kumar (verified owner) –
Great quality eSUN PLA-Matte 1.75mm 3D Printing Filament. Colors are vibrant and layer adhesion is perfect.
Naman Yadav –
My go-to eSUN PLA-Matte 1.75mm 3D Printing Filament now. Consistent quality spool after spool. Zbotic is my preferred store.
Aarav Luthra (verified owner) –
Great quality eSUN PLA-Matte 1.75mm 3D Printing Filament. Colors are vibrant and layer adhesion is perfect.
Ashish Gupta (verified owner) –
Excellent for functional prints. This eSUN PLA-Matte 1.75mm 3D Printing Filament has great strength and flexibility.
Anjali Malhotra (verified owner) –
Bought multiple colors of this eSUN PLA-Matte 1.75mm 3D Printing Filament. All equally good quality. Highly recommended!
Sameer Kapoor (verified owner) –
Decent eSUN PLA-Matte 1.75mm 3D Printing Filament. Some initial calibration needed but prints are coming out well now.
Om Pandey –
Great quality eSUN PLA-Matte 1.75mm 3D Printing Filament. Colors are vibrant and layer adhesion is perfect.
Rajesh Batra (verified owner) –
Perfect eSUN PLA-Matte 1.75mm 3D Printing Filament for my 3D printing needs. Spool is well wound, no tangles.
Siddharth Pillai (verified owner) –
Superb eSUN PLA-Matte 1.75mm 3D Printing Filament! Been printing for months with this. Consistent diameter throughout.
Sarika Dhillon (verified owner) –
Great eSUN PLA-Matte 1.75mm 3D Printing Filament. Temperature settings are as recommended. Perfect first layer every time.
Shruti Grewal (verified owner) –
Pretty good eSUN PLA-Matte 1.75mm 3D Printing Filament. Value for money. Using it for my college 3D printing projects.
Rajesh Gill (verified owner) –
Superb eSUN PLA-Matte 1.75mm 3D Printing Filament! Been printing for months with this. Consistent diameter throughout.
Swati Thakur (verified owner) –
My go-to eSUN PLA-Matte 1.75mm 3D Printing Filament now. Consistent quality spool after spool. Zbotic is my preferred store.
Paras Kamath (verified owner) –
Excellent for functional prints. This eSUN PLA-Matte 1.75mm 3D Printing Filament has great strength and flexibility.
Pankaj Modi –
Great quality eSUN PLA-Matte 1.75mm 3D Printing Filament. Colors are vibrant and layer adhesion is perfect.