This is the 18V variant of the 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery in Battery Protection Board. Available at ₹231.14 (₹195.88 + GST) with free shipping across India.
Looking for 5s Board? 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery is available at Zbotic with fast shipping across India.
PRODUCT DESCRIPTION
This is 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery. It ensures the security of the battery pack.
Connection Diagram of 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery
Features:
- Single section power consumption since: 30 μA
- Power consumption between single section: 3 μA
- Single section over charging sensing voltage: 4.18- / 4.22V
- Over-charging recovery voltage: 4.05-4.15V
- Overcharge detection delay: 0.5 / 1.0 / 2.0S
- Single section discharge detection voltage: 2.75-2.85V
- Over discharge recovery voltage: 2.90-3.20V
- Discharge detection delay: 0.5-2.0S
Specification:
| Charging voltage (V) | 21 |
|---|---|
| Charging MOS pressure value (V) | 35 |
| Discharge MOS pressure value (V) | 35 |
| Charging current (A) | 56 |
| Continuous discharge current (A) | 15 |
| Over current protection (A) | 50/55/60 |
| Over current protection delay (mS) | 20/25/30 |
| Shipping Weight | 0.004 kg |
| Shipping Dimensions | 8 × 3 × 3 cm |
Package Includes:
1 x BMS Charger Protection Board
1 x Connector Cable
5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Overview
This 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection board is designed to safeguard and manage 5-cell (18V nominal, 21V max) battery packs built with 18650 cells. It monitors individual cell voltages, enforces balanced charging and prevents over-charge, over-discharge and over-current conditions to extend battery life and ensure safe operation.
Key Features of 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection
- Supports 5-cell 18650 packs up to 21V charging voltage and 15A continuous discharge
- Adjustable over-current protection at 50/55/60A with 20/25/30 ms trip delay
- Accurate cell thresholds: over-charge detection at 4.18–4.22V, recovery at 4.05–4.15V; discharge cutoff at 2.75–2.85V, recovery at 2.90–3.20V
- Ultra-low quiescent draw: 30 µA per cell and 3 µA between cell groups
- High charge current capability: up to 56A for rapid pack charging
- Genuine product, fast shipping from Zbotic across India
Applications and Use Cases
- Custom 18V battery packs for cordless drills, saws and other power tools
- Battery management in electric scooters, e-bikes and hoverboards
- Portable power stations, UPS systems and off-grid solar energy storage
- RC models, drones and robotics projects requiring 5-cell Li-ion packs
- DIY battery backup solutions for networking equipment and emergency lights
How to Use 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection
Mount the board onto your welded or spot-welded 5S 18650 cell stack by connecting each cell’s positive tap to the corresponding B1–B5 pads and the negative end to B–. Wire your charger and load to P+ and P– terminals. Confirm proper cell sequencing before initial power-up. The board will automatically balance cells during charge and disconnect on fault conditions.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What battery voltage range does this BMS support?
This board is tailored for 5S Li-ion configurations, covering a nominal pack voltage of 18V and charging up to 21V maximum.
Can I discharge at 15A continuously without triggering protection?
Yes. The BMS allows up to 15A continuous discharge. If current exceeds the selected over-current threshold (50/55/60A), it will disconnect within 20–30 ms.
How does the BMS recover after an over-discharge event?
When the pack voltage falls below 2.75–2.85V per cell, the BMS cuts off output. It will automatically reconnect once each cell voltage rises back above 2.90–3.20V during recharge.
Battery Recycling Process: Extract Materials Safely
Understanding the battery recycling process is essential as lithium-ion batteries reach end of life in growing numbers. India...
Read More →
Battery Capacity Tester Circuit with Arduino & LCD Display
Battery Capacity Tester Circuit with Arduino & LCD Display A battery capacity tester Arduino LCD project is one...
Read More →
Thermoelectric Harvester: Power from Waste Heat
A thermoelectric harvester converts temperature differences into electrical energy using the Seebeck effect, enabling power generation from waste...
Read More →Technical Specifications
| Voltage Range | 18V - 21V |
|---|---|
| Current Rating | 15A |
| Cell Configuration | 5S |
| SKU | AI3446 |
| Weight | 0.01339 kg |
| Availability | Out of Stock |
Applications & Use Cases
The 5S 15A 18650 Li-ion Lithium Battery BMS Charger Protection Board for 18V 21V Battery is a versatile battery protection board used across a wide range of applications including lithium battery pack protection, power bank builds, e-bike battery management, solar energy storage, and UPS systems.
Common use cases:
- Building a custom lithium battery pack
- Adding overcharge/overdischarge protection
- Creating a DIY power bank
This product is ideal for battery pack builders and power electronics engineers.
Technical Tip: BMS boards prevent overcharge, overdischarge, overcurrent, and short circuit. Match cell count (S) and max current rating to your battery pack.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
