The BGC v3.15 MOS Large Current 2-axis brushless gimbal controller driver is the original BaseCam SimpleBGC 8-bit controller board, previously known as AlexMos. Although it has been replaced by the 32-bit version, the 8-bit version remains available in the market and continues to be actively used and supported.
It still produces outstanding results!!!
Without the extension board, this controller can be used for building high-quality 2- axis camera stabilizing systems. The controller can also be used for 3- axis control systems with the addition of the extension board.
In either case, from a functional perspective, the newer 32-bit board is 100% backward compatible with this board, and users of this board can freely upgrade systems from this board to the newer 32-bit board.
In addition, the management software is backward compatible, so it is possible (or preferred) to use a new version of the GUI (SimpleBGC’s management software) with this board- giving an improved experience with this board and also further making an upgrade to the 32-bit board as easy as possible.
Note that the board has firmware and the GUI software runs externally (on a PC, Mac, or Linux, etc) but the GUI keeps track of the firmware number and it requires that the GUI revision be at or newer than the board’s firmware.
While there is a User Manual for the 8-bit version, since you may use the GUI for the 32-bit board with this board (the 8-bit) it may nonetheless be instructive to obtain the newer and more thorough User Manual for the newer 32-bit version. This is especially pertinent if you choose to use the newer version of the GUI with this board. Remember however you can only use firmware for the 8-bit board on the 8-bit board.
Note:
We recommend to don’t flashing/Updating the Default firmware. Updated or new firmware may cause a problem of connectivity with PC/Laptop.
Warm Notice:
Wrong use way may damage the control board. Please follow the instructions:
1. Recommended power supply is 12V(3s battery).
2, Camera must be fixed in the head (without any loosening).
3. Adjust the Gopro camera to the left or right,so that the camera is at Horizontal level.
4. Before camera fixed in the gimbal , please do not push ” on ” button to have power.
5.The gimbal camera must be use belt tight, otherwise it will have problems. And if you do this many times, it will cause damage to the flight controller.
Features:
- Adopts MOS tube drive, with larger current
- Support 2-8 series gimbal motor
- Peak current 10A
- With IIC interface
- Onboard USB for PC communication to configure and upgrade
Specification:
| Max. Current to each Motor | 2.8 A |
|---|---|
| Short Time Current to each Motor | 7.1 A |
| Output Current Regulation | 8 or 32 kHz PWM |
| Interface Type | I2C |
| Supported Sensors | MPU6050 |
| Overcurrent protection | Yes |
| Overheat Protection | Yes |
| Under Voltage Protection | Yes |
| Reverse Polarity Protection | Yes |
| Size ( L x W ) mm | 52 x 52 |
| Cable Length (cm) | 30 |
| Mounting Hole(mm) | M3 |
| Shipping Weight | 0.06 kg |
| Shipping Dimensions | 10 × 7 × 2 cm |
Package Includes :
1 x BGC v3.15 Two-axis brushless gimbal driver Module
1 x Gyro sensor. (with 30 cm cable)
1x Cable
Drone Payload Systems: How to Add a Camera Gimbal
Drone Payload Systems: How to Add a Camera Gimbal to Your Drone A camera gimbal transforms your drone...
Read More →
Long Range Cruiser Drone: 7-Inch Build for Exploration
Table of Contents Understanding Long Range Cruiser Drone Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation...
Read More →
Drone Tool Kit: Essential Tools for Building and Repair
Table of Contents Understanding Drone Tool Kit Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation Practical...
Read More →Technical Specifications
| SKU | AI4669 |
|---|---|
| Weight | 0.02405 kg |
| Availability | In Stock |
Applications & Use Cases
The 2-Axis Brushless Gimbal Controller Board is a versatile drone gimbal and accessories used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Vinay Singh (verified owner) –
Pretty good 2-Axis Brushless Gimbal Controller Board. Works as expected for my drone project. Would buy again.
Vipin Gill (verified owner) –
Nice 2-Axis Brushless Gimbal Controller Board, does the job. Delivery took a couple of extra days but product is solid.
Aditya Vyas (verified owner) –
Using this 2-Axis Brushless Gimbal Controller Board in my hexacopter. Smooth operation and excellent thrust.
Saurabh Gupta (verified owner) –
Been using this 2-Axis Brushless Gimbal Controller Board for 3 months now, zero issues. Great product.
Harshit Rao –
My 5th order from Zbotic. This 2-Axis Brushless Gimbal Controller Board is excellent as always. Totally reliable store.
Abhishek Khanna –
Decent 2-Axis Brushless Gimbal Controller Board for the price. Using it in my quadcopter, performs well overall.
Shruti Sen (verified owner) –
Very good quality 2-Axis Brushless Gimbal Controller Board. I’ve been building drones for 2 years now and this is one of the best I’ve used.
Rahul Joshi –
This 2-Axis Brushless Gimbal Controller Board is value for money. Comparing with other brands, Zbotic offers the best deal.
Kritika Rathore (verified owner) –
Nice 2-Axis Brushless Gimbal Controller Board, does the job. Delivery took a couple of extra days but product is solid.
Raghav Rawat (verified owner) –
Been using this 2-Axis Brushless Gimbal Controller Board for 3 months now, zero issues. Great product.
Nandini Trivedi (verified owner) –
My 5th order from Zbotic. This 2-Axis Brushless Gimbal Controller Board is excellent as always. Totally reliable store.