MicoAir WiFi Link Module for UAV Drones
Description:
Typical Applications
- Open-source Flight Controller (ArduPilot/PX4) Wireless Tunining: Supports Ground Control Station (GCS) software such as Mission Planner, QGroundControl (QGC), and MicoPilot.
- Drone Swarm Light Show Networking: Enables multi-drone swarm communication, waypoint data, and command upload (supports Skybrush).
- Robotics and Unmanned Systems Wireless Access: Suitable for various control and debugging scenarios requiring short-range, high-bandwidth wireless communication.
Product Features
- Powered by ESP32-C5
- Dual-band WiFi: 2.4 GHz / 5 GHz
- Supports WiFi 6 (802.11ax), backward compatible with 802.11 a/b/g/n/ac
- Defaults to AP mode for direct connection
- Supports STA mode for connecting to a router
- Supports bidirectional Serial <-> UDP transparent transmission
- BLE serial transparent transmission (Bluetooth connection currently only supported by MicoPilot)
- Built-in web-based configuration page
- Parameter configuration via USB serial AT commands
Parameters
- Main Controller: ESP32-C5
- Wireless Standard: WiFi 6 / 802.11ax, backward compatible with 802.11 a/b/g/n/ac
- Frequency: 2.4 GHz / 5 GHz
- Communication Interface: LVTTL (3.3V) Serial / USB-Type-C (CH340)
- Core Functions: WiFi UDP Serial Transparent Transmission / BLE Serial Transparent Transmission (BLE currently only supported by MicoPilot)
- Default WiFi Mode: AP (Can be switched to STA mode via AT commands)
- Max Range (AP Mode): 100 meters (Direct connection to phone/PC, tested in open environments without interference)
- Max Range (STA Mode): 500 meters (Relayed via high-power router, tested in open environments without interference)
- Max Range (BLE): 10 meters
- Operating Voltage: 5V
- Avg. Operating Current: 150mA
Serial Port
- Debug Port Baud Rate: 115200
- Telemetry Port Baud Rate: 57600 / 115200 (Default) / 230400 / 460800 / 921600
WiFi Operating Modes
- AP Mode (Default): The module creates its own WiFi hotspot. The Ground Control Station (PC/Phone) connects directly to it
STA Mode: The module connects to an existing local router. The GCS and the module communicate within the same Local Area Network (LAN).
BLE
- Bluetooth Name: MicoAir_BLE_XXXX
- Bluetooth Password: None
- Connection Range: 10 meters
- Conflict with 2.4G WiFi: Since BLE and 2.4G WiFi share the same physical antenna and channel, they cannot be used simultaneously. The factory default is 5G WiFi (AP Mode) + BLE. If the module is switched to 2.4G WiFi (AP Mode), BLE will be automatically disabled. In STA mode, connecting to a 2.4G router will also automatically disable BLE.
Interface Description
Telemetry Interface
- TX and RX must be cross-connected.
- The flight controller and the module must share a common ground (GND).
- The flight controller serial baud rate must match the module’s configured baud rate.
Debug Interface
- Configuring parameters via AT commands.
- Firmware upgrades.
Physical
- Dimensions: 34.5×23.5x6mm
- Weight: 5.5g (without antenna)
Package Includes:
1xMicoAir WiFi Link Module for UAV Drones
Best Microcontroller Boards for Engineering Students India 2026
Choosing the best microcontroller boards for engineering students in India in 2026 is both exciting and overwhelming —...
Read More →
Arduino Automatic Street Light with LDR Sensor
Table of ContentsIntroductionComponents and Hardware SetupWiring Diagram and ConnectionsComplete Code with ExplanationCustomization and ImprovementsTroubleshooting Common IssuesAdvanced Features and...
Read More →
10 Best Arduino Projects for Beginners (With Code)
Looking for fun and educational Arduino projects for beginners? You've come to the right place. These 10 projects...
Read More →Technical Specifications
| Brand | MicoAir |
|---|---|
| Interface / Protocol | WiFi |
| SKU | AI8331 |
| Weight | 0.0 kg |
| Availability | Out of Stock |
Applications & Use Cases
The MicoAir WiFi Link Module for UAV Drones is a versatile bluetooth, wifi and trans-receiver ics used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine MicoAir product sourced from authorized channels
Reviews
There are no reviews yet.