Experience effortless 3D printing with the Bambu Lab P1S. This printer sets up in just 15 minutes, boasting a well-polished design and software for seamless operation. Its enclosed body supports high-temperature filament printing, while the AMS enables up to 16-color printing. With up to 20,000 mm/s² acceleration, enjoy rapid printing without compromising quality. Plus, monitor your prints remotely with the built-in camera and Bambu Studio integration.
Note: Please check our range of Bambu lab filaments.
Specification:
| Model Series: | P1 Series |
|---|---|
| Print Size (L x W x H) (mm): | 256 x 256 x 256 |
| Printing Speed (mm/s) | 500 |
| Filament Compatibility: | ABS, ASA, PA, PC, PET, PETG, PLA, PVA, TPU |
| Model No.: | P1S Combo |
| Nozzle Diameter (mm): | 0.2 mm, 0.6 mm, 0.8 mm (Optional), 0.4 mm (Included) |
| Shell Material | Enclosed (Plastic & Glass) |
| Plate Type | Bambu Cool Plate, Bambu Engineering Plate, Bambu High Temperature Plate, Bambu Textured PEI Plate |
| Camera Details | Low-Rate Camera 1280 x 720/0.5fps Timelapse Supported |
| Ideal Filament: | ABS, ASA, PET, PETG, PLA, PVA, TPU |
Features:
- Works right out of the box, set up in 15 minutes.
- Well-polished hardware and software.
- Enclosed body for high-temperature filament printing.
- Up to 16-color printing with AMS.
- Up to 20000 mm/s² acceleration, prints a bunchy in 18min.
- Build-in camera for remote monitoring and timelapse.
- Hot End: All-Metal.
- Nozzle: Stainless Steel.
- Max Hot End Temperature: 300.
- Build Plate Surface Compatibility: Bambu Textured PEI Plate, Bambu Cool Plate, Bambu Engineering Plate, Bambu High-Temperature Plate
- Max Build Plate Temperature: 100.
- Max Speed of Tool Head: 500 mm/s.
- Max Acceleration of Tool Head: 20 m/s².
- Filament Run Out Sensor: Yes
- Electrical Requirements: 100-240 VAC, 50/60 Hz, 1000 W @220 V, 350W@110V.
Package Includes:
1 x Bambu Lab P1S Combo 3D Printer
Datasheet
Carbon Fiber Filament Printing: PETG-CF and PLA-CF Complete Guide
Table of ContentsWhat is Carbon Fiber Filament?PETG-CF vs PLA-CF: Which Should You Use?Printer and Hardware RequirementsNozzle Selection: The...
Read More →
Bambu Lab A1 Mini Review: Compact Speed Printer India
Table of Contents Bambu Lab A1 Mini Specifications Unboxing and Setup Experience Print Quality at Various Speeds AMS...
Read More →
Marlin Firmware: How to Compile and Flash Your 3D Printer
Marlin is the open-source firmware that powers the vast majority of consumer FDM 3D printers worldwide -- from...
Read More →Technical Specifications
| Brand | Bambu Lab |
|---|---|
| Model | P1S |
| SKU | AI6511 |
| Weight | 27.65 kg |
| Availability | In Stock |
Applications & Use Cases
The Bambu Lab P1S Combo 3D Printer is a versatile 3d printers used across a wide range of applications including rapid prototyping, custom part manufacturing, educational projects, hobby model making, and architectural models.
Common use cases:
- Printing custom enclosures for electronics projects
- Creating prototypes before production
- Printing replacement parts for household items
This product is ideal for makers, engineers, designers, educators, and hobbyists.
Technical Tip: FDM printers are best for functional parts; resin (SLA/MSLA) printers excel at fine detail. Consider build volume, layer resolution, and material compatibility.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Bambu Lab product sourced from authorized channels
Raghav Kamath (verified owner) –
This Bambu Lab P1S Combo 3D Printer made my prototyping so much easier. Clean prints, no post-processing needed.
Rohan Reddy –
My go-to Bambu Lab P1S Combo 3D Printer now. Consistent quality spool after spool. Zbotic is my preferred store.
Mahesh Mehta (verified owner) –
Pretty good Bambu Lab P1S Combo 3D Printer. Value for money. Using it for my college 3D printing projects.
Sarika Ghosh (verified owner) –
Superb Bambu Lab P1S Combo 3D Printer! Been printing for months with this. Consistent diameter throughout.
Tanya Negi (verified owner) –
Excellent Bambu Lab P1S Combo 3D Printer! Print quality is outstanding. No warping or stringing issues.
Kartik Luthra –
Average Bambu Lab P1S Combo 3D Printer. Quality is okay but had some inconsistent diameter issues.
Dev Grewal (verified owner) –
Superb Bambu Lab P1S Combo 3D Printer! Been printing for months with this. Consistent diameter throughout.
Rohan Khanna (verified owner) –
Superb Bambu Lab P1S Combo 3D Printer! Been printing for months with this. Consistent diameter throughout.
Isha Bhandari (verified owner) –
Excellent for functional prints. This Bambu Lab P1S Combo 3D Printer has great strength and flexibility.
Arnav Khanna –
Love this Bambu Lab P1S Combo 3D Printer. No clogging issues and the finish is beautiful.
Devansh Patel –
Good quality Bambu Lab P1S Combo 3D Printer. Works well with my printer. Bed adhesion is strong.
Tanmay Kumar (verified owner) –
Decent Bambu Lab P1S Combo 3D Printer. Some initial calibration needed but prints are coming out well now.
Riya Dhawan (verified owner) –
Bought multiple colors of this Bambu Lab P1S Combo 3D Printer. All equally good quality. Highly recommended!
Vijay Bhat –
Good quality Bambu Lab P1S Combo 3D Printer. Works well with my printer. Bed adhesion is strong.
Sanjay Sethi (verified owner) –
My go-to Bambu Lab P1S Combo 3D Printer now. Consistent quality spool after spool. Zbotic is my preferred store.
Rohit Dave –
Okay Bambu Lab P1S Combo 3D Printer. Works but needed more temperature tuning than expected.
Swati Jain (verified owner) –
Decent Bambu Lab P1S Combo 3D Printer. Some initial calibration needed but prints are coming out well now.
Shivam Chauhan (verified owner) –
Pretty good Bambu Lab P1S Combo 3D Printer. Value for money. Using it for my college 3D printing projects.
Vivek Luthra (verified owner) –
Great quality Bambu Lab P1S Combo 3D Printer. Colors are vibrant and layer adhesion is perfect.
Manoj Pandey –
Nice Bambu Lab P1S Combo 3D Printer. Colors are good. Spool could be vacuum sealed better.
Varun Yadav (verified owner) –
Superb Bambu Lab P1S Combo 3D Printer! Been printing for months with this. Consistent diameter throughout.
Chitra Menon (verified owner) –
Superb Bambu Lab P1S Combo 3D Printer! Been printing for months with this. Consistent diameter throughout.
Kishan (verified owner) –
what an amazing Machine. initially I was hesitant to buy as it’s a lot of money (atleast for me) i was scared how the logistics will be handled as it’s a fragile item. Packaging was top notch. Machine is Amazing, No problem at all. Genuine and Authentic. thank you zbotics
Utkarsh Patel –
My go-to Bambu Lab P1S Combo 3D Printer now. Consistent quality spool after spool. Zbotic is my preferred store.
Yashwant Luthra (verified owner) –
Excellent for functional prints. This Bambu Lab P1S Combo 3D Printer has great strength and flexibility.
Bharat Arora (verified owner) –
This Bambu Lab P1S Combo 3D Printer is amazing. My prints come out smooth and consistent every time.
Vipin Malhotra (verified owner) –
Perfect Bambu Lab P1S Combo 3D Printer for my 3D printing needs. Spool is well wound, no tangles.
Jatin Solanki (verified owner) –
Excellent for functional prints. This Bambu Lab P1S Combo 3D Printer has great strength and flexibility.
KRISHNA (verified owner) –
very good