This is the Red variant of the Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered) in Boards Compatible with Arduino. Available at ₹178.60 (₹151.36 + GST) with free shipping across India.
The Nano V3.0 CH340 Chip with Mini USB Cable is a compact version of the popular Arduino Uno, offering the same functionality but in a smaller form factor.
Perfect for small projects where space is crucial, the Nano V3.0 is ideal when you don’t require many pin-outs but need a sleek, space-saving design.
This version uses a low-cost USB-Serial CH340 chip, making it more affordable than older Arduino Nano versions, which used the FTDI USB-Serial chip.
Based on the ATmega328 (Nano R3), the Arduino Nano is a small, fully functional board that is breadboard-friendly. It offers nearly the same capabilities as the Uno but in a more compact package. Unlike the Uno, it lacks a DC power jack and instead uses a Mini-B USB cable for connectivity.
The Nano can be powered through the Mini-USB connection, a 6-20V unregulated external power supply (pin 30), or a 5V regulated external power supply (pin 27). It automatically selects the highest voltage source for power.
Measuring just 43mm x 18mm, the Nano V3.0 with the CH340 chip features 6 PWM I/O pins out of 14 digital I/O pins, 8 analog inputs, a 16MHz clock speed, and 32KB of flash memory.
Note:-
- CH340 chip might not work directly with some PC/Laptop, you will need some ch340 drivers.
- This board comes with OLD BOOTLOADER buy it accordingly
Features :
- 1 pair of TTL level serial transceiver ports RX / TX
- Using Atmel Atmega328P-AU MCU
- There is a bootloader(old) installed in it
- Support USB download and Power
- Support for external 5V ~ 12V DC power supply
- Support power supply by 9V battery
- Support ISP download
- Automatic reset during program download.
- Power OK blue LED on the bottom.
- Green (TX), red (RX) and orange (L) LED.
- +5V to AREF jumper.
- Auto sensing/switching power input.
- Small mini-B USB for programming and serial monitor.
- ICSP header for direct program download.
- Standard 0.1” spacing DIP (breadboard friendly).
- Manual reset switch.
Specification
| Item Type: | Dev. Board, Unsoldered |
|---|---|
| Board Type: | Nano |
| With Cable (Y/N): | Y |
| Chip Type: | CH340 |
| Color: | Blue |
| Microcontroller | ATmega328 |
| Operating Voltage (VDC) | 5 |
| Input Voltage (V) | 7-12 V |
| Power Consumption (W) | 1 |
| Analog I/O Pins | 8 |
| Digital I/O Pins | 22 |
| PWM Output Pins | 6 |
| Architecture | AVR |
| Clock Speed | 16 MHz |
| DC Current per I/O Pin (mA) | 40 |
| Flash Memory: | 32 KB |
| EEPROM | 1KB |
| SRAM | 2 |
Package Includes :
1 x Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered)
Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Overview
The Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino is a compact development board based on the Atmel ATmega328P-AU, preloaded with the Arduino bootloader and a CH340 USB-Serial interface. It offers a full complement of I/O pins in a breadboard-friendly format, making it ideal for space-constrained projects and rapid prototyping.
Key Features of Nano V3.0 CH340 Chip with Mini USB Cable Compatible with
- Atmel ATmega328P-AU MCU with bootloader installed for immediate Arduino IDE support
- Low-cost CH340 USB-Serial converter with Mini-B USB cable for power and programming
- Operating voltage: 5V logic level; 1 pair of TTL-level serial transceiver ports (RX/TX)
- 14 digital I/O pins (TX, RX, D2–D13) and 8 analog input ports (A0–A7)
- Breadboard-friendly 0.1″ spacing DIP design with manual reset switch
- Genuine product, fast shipping from Zbotic
Applications and Use Cases
- Small-scale robotics control and motor driver interfaces
- Sensor data acquisition and environmental monitoring prototypes
- Wearable electronics and handheld gadgets requiring compact form factors
- Educational kits for teaching microcontroller programming
- Home automation modules and IoT gateway nodes
How to Use Nano V3.0 CH340 Chip with Mini USB Cable Compatible with
Plug the Nano V3.0 into a breadboard or mount it on a custom PCB, connect the Mini-USB cable to your PC, install the CH340 driver, then open the Arduino IDE. Select “Arduino Nano” with ATmega328P (CH340) as the board, choose the correct COM port, write or load your sketch, and click “Upload” to program the microcontroller.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Do I need to install drivers for the CH340 USB interface?
Yes, download and install the CH340 driver from the manufacturer’s website or a trusted repository. Once installed, your computer will recognize the Nano board as a serial port in the Arduino IDE.
Can I power the Nano via the 5V pin instead of USB?
Yes, you can supply a regulated 5V to the 5V pin or VIN pin (5–5.5V). However, using the Mini-USB cable for both power and programming is recommended for stable operation.
How many analog and digital pins are available?
The Nano V3.0 provides 8 analog inputs (A0–A7) and 14 digital I/O pins (including TX and RX), allowing you to connect a variety of sensors, actuators, and communication modules for diverse project needs.
Arduino CAN Bus Tutorial: MCP2515 Module for Automotive Projects
The Arduino CAN bus MCP2515 module is your gateway to reading automotive sensor data, communicating with vehicle ECUs,...
Read More →
Arduino SPI Communication: How to Interface Multiple Devices
If you've been working with Arduino for a while, you've likely hit a point where a single sensor...
Read More →
Arduino Interrupt Pins: External and Timer Interrupts Explained
Understanding Arduino interrupts is the key to writing truly responsive embedded code. Without interrupts, your Arduino must constantly...
Read More →Technical Specifications
| Brand | Arduino |
|---|---|
| Interface / Protocol | USB, BLE |
| Connector Type | USB-C |
| Color | Red |
| SKU | AI6241 |
| Availability | Out of Stock |
Applications & Use Cases
The Nano V3.0 CH340 Chip with Mini USB Cable Compatible with Arduino (Unsoldered) is a versatile boards compatible with arduino used across a wide range of applications including electronics learning, robotics, home automation, sensor interfacing, and motor control.
Common use cases:
- Learning programming and electronics
- Building a line-following robot
- Creating a home automation hub
This product is ideal for students, hobbyists, and electronics beginners.
Technical Tip: Arduino Uno is the standard learning board. Mega offers more pins for complex projects. Nano suits breadboard prototyping.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Arduino product sourced from authorized channels
Eshan Mishra (verified owner) –
Excellent Nano V3.0 CH340 Chip with Mini! Perfect for my Arduino project. All pins working correctly.
Rishabh Goyal (verified owner) –
Excellent Nano V3.0 CH340 Chip with Mini! Built a weather station with this. Everything works as expected.
Vikram Jain (verified owner) –
This Nano V3.0 CH340 Chip with Mini made my robotics project so much easier. Highly recommended for students.
Simran Pandey (verified owner) –
Love this Nano V3.0 CH340 Chip with Mini. Using it for my home automation project, very reliable.
Isha Panchal (verified owner) –
Pretty good Nano V3.0 CH340 Chip with Mini. Compatible with most libraries. Happy with the purchase.
Prateek Joshi (verified owner) –
This Nano V3.0 CH340 Chip with Mini is genuine quality. My students love working with it in our robotics lab.
Jai Saxena (verified owner) –
This Nano V3.0 CH340 Chip with Mini is a must-have for any maker. Works perfectly with Arduino IDE.
Sahil Joshi (verified owner) –
This Nano V3.0 CH340 Chip with Mini is a must-have for any maker. Works perfectly with Arduino IDE.
Daksh Grewal (verified owner) –
Outstanding quality Nano V3.0 CH340 Chip with Mini. I teach electronics and order these in bulk for my classes.
Ananya Agarwal (verified owner) –
Pretty good Nano V3.0 CH340 Chip with Mini. Compatible with most libraries. Happy with the purchase.
Lalit Mehta (verified owner) –
Pretty good Nano V3.0 CH340 Chip with Mini. Compatible with most libraries. Happy with the purchase.
Sunil Joshi (verified owner) –
Very satisfied with this Nano V3.0 CH340 Chip with Mini. Fast shipping and genuine components. Zbotic is the best!
Devansh Khurana (verified owner) –
Nice Nano V3.0 CH340 Chip with Mini for the price. Using it in my college project, performs well.
Gauri Kapoor (verified owner) –
Superb Nano V3.0 CH340 Chip with Mini! Compatible with all my existing Arduino shields and libraries.
Gaurav Krishnan –
Nice Nano V3.0 CH340 Chip with Mini for the price. Using it in my college project, performs well.
Shivam Thakur –
Nice Nano V3.0 CH340 Chip with Mini for the price. Using it in my college project, performs well.
Manoj Tandon –
Pretty good Nano V3.0 CH340 Chip with Mini. Compatible with most libraries. Happy with the purchase.
Gaurav Nayak (verified owner) –
Very satisfied with this Nano V3.0 CH340 Chip with Mini. Fast shipping and genuine components. Zbotic is the best!
Sakshi Solanki (verified owner) –
Fantastic Nano V3.0 CH340 Chip with Mini! All GPIO pins tested and working. Great for prototyping.
Chetan Hegde –
Superb Nano V3.0 CH340 Chip with Mini! Compatible with all my existing Arduino shields and libraries.
Raghav Kulkarni (verified owner) –
This Nano V3.0 CH340 Chip with Mini is a must-have for any maker. Works perfectly with Arduino IDE.
Tanya Saxena (verified owner) –
Very satisfied with this Nano V3.0 CH340 Chip with Mini. Fast shipping and genuine components. Zbotic is the best!
Devansh Dubey (verified owner) –
Great quality Nano V3.0 CH340 Chip with Mini. Uploaded my first sketch and it worked flawlessly. Ideal for beginners.
Rakesh Dhawan (verified owner) –
Love this Nano V3.0 CH340 Chip with Mini. Using it for my home automation project, very reliable.
Eshan Joshi –
Perfect Nano V3.0 CH340 Chip with Mini for IoT projects. Easy to set up and program. Great documentation available online.
Parth Dubey –
Pretty good Nano V3.0 CH340 Chip with Mini. Compatible with most libraries. Happy with the purchase.
Krishna Rajan –
Great Nano V3.0 CH340 Chip with Mini for my college mini project. Got good marks thanks to this working perfectly!
Sunil Kohli (verified owner) –
This Nano V3.0 CH340 Chip with Mini is a must-have for any maker. Works perfectly with Arduino IDE.
Isha Mukherjee (verified owner) –
Great Nano V3.0 CH340 Chip with Mini for my college mini project. Got good marks thanks to this working perfectly!
Naman Trivedi (verified owner) –
Love this Nano V3.0 CH340 Chip with Mini. Using it for my home automation project, very reliable.