Looking for Telemetry Kit? 915Mhz 500MW Telemetry Kit is available at Zbotic with fast shipping across India.
Product Description
This 3DR Radio Telemetry 500mW Set allows you to link to a flight controller to a USB or UART-equipped device such as a computer, laptop, or tablet supporting a USB connection (OTG). The new V2 radios, no longer have a separate Air/Ground module, as both transceivers can use UART or USB connections and support both modes. The Radio set not only lets you see live data, such as live GPS position overlaid on a map, system voltage, heading, waypoint navigation even artificial horizon and so much more.
Using open-source MAVlink-based ground station software, you can even fly your aircraft with a joystick via your computer and update settings live! Or just use it for your DIY projects that need a wireless Serial interface. This kit offers a great low price, a longer range, and superior performance. The system utilizes the 915MHz band and provides a full-duplex link using HopeRF’s HM-TRP modules running custom, open-source, firmware.
Note: This product is available with a case and without a case, you will receive random.
Features & Specifications
-
- MAVLink protocol framing status documents
- Frequency modulation and Spread Spectrum (FHSS)
- Self-adaption to time-division multiplexing
- Support LBT and AFA
- Configurable duty cycle
- Built-in error-correcting code(up to 25% data bit error)
- AT command configures data transmission
- RT command remote control data transmission
- Interchangeable air and ground 433MHz modules
- Micro-USB port
- 6-position Molex connector
- 500 mW maximum output power (adjustable)
- SMA connector
- 2-way full-duplex communication through adaptive TDM
- UART interface
- Transparent serial link
- Open-source SIK firmware
- Configurable through *Mission Planner and *APM Planner
- Based on the HM-TRP wireless module, with Si1000 8051 microcontroller and Si4432 wireless module
Package Includes:
2 x Telemetry Module.
2 x 2.5dbi Antenna.
1 x Micro USB OTG cable.
1 x Set of Connection Cable.
915Mhz 500MW Telemetry Kit Overview
The 915Mhz 500MW Telemetry Kit is a high-power radio link designed to transmit real-time flight data between your UAV’s flight controller and a ground station. Operating on the 915MHz band with 500mW output, it provides a transparent serial link via UART or USB for live GPS position, system voltage, heading, waypoint navigation and more.
Key Features of 915Mhz 500MW Telemetry Kit
- 915MHz frequency with 500mW RF power for extended line-of-sight telemetry
- Compatible with UART interface and USB (OTG) connections on both modules
- Transparent serial link for MAVLink data, including GPS, voltage and attitude
- Ships with open-source SiK firmware, configurable via Mission Planner or APM Planner
- No separate air/ground units – both transceivers support USB and UART modes
- Genuine product with fast shipping across India from Zbotic
Applications and Use Cases
- Long-range UAV telemetry for multirotors, fixed-wing and VTOL drones
- Real-time GPS tracking and mapping during aerial surveys
- Industrial inspection flights where live battery voltage and status are critical
- Research projects requiring remote data logging over several kilometers
- Waypoint navigation and mission updates without landing the aircraft
- Ground-station joystick control for remote piloting via computer
How to Use 915Mhz 500MW Telemetry Kit
Connect one radio unit to your flight controller’s UART port and the other to a PC, laptop or OTG-enabled tablet via USB. Power each module, launch Mission Planner or APM Planner, select the correct COM port and baud rate, then configure RF settings and begin receiving live MAVLink telemetry data over the transparent link.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Which flight controllers work with this telemetry kit?
The kit interfaces via UART, making it compatible with popular controllers like Pixhawk, APM 2.x and Cube series. On the ground side, any computer or OTG-enabled tablet supporting USB serial works seamlessly.
What is the effective communication range?
With the stock antennas, you can typically achieve 3–5 km line-of-sight range. Actual distance varies based on antenna quality, mounting height and surrounding obstructions.
How do I update or reconfigure the firmware?
Use Mission Planner or APM Planner to connect over the USB port. From the SiK radio tab, you can flash new firmware, adjust RF power, change network IDs, and tweak baud rates without additional programmers.
Technical Specifications
| Frequency | 915Mhz |
|---|---|
| SKU | AI1509 |
| Weight | 0.07475 kg |
| Availability | Out of Stock |
Applications & Use Cases
The 915Mhz 500MW Telemetry Kit is a versatile fpv antennas and trans-receivers used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
