Looking for Screw Shields V2 Board? Screw Shields V2 Terminal Expansion Board is available at Zbotic with fast shipping across India.
The Screw Shields V2 Terminal Expansion Board is an Arduino-compatible shield that lets you attach jumper wires to a screw terminal for a stronger and more secure connection. You can use it for your I/O and power pins without worrying about loose wires. You can also stack other expansion boards on top of this shield to create more complex projects.
This shield not only expands the terminal controller, but also allows you to overlay other shields as you wish. This way, you can avoid using the breadboard and make your wiring simpler and more reliable.
It also extends the power supply pins for the signal pins, so you can directly connect sensors and devices to the screw shield v2. The pin headers are provided as well, so you can connect another shield on top of this one.
Features :
- I/O Screw terminals.
- Directly plug-able.
- Arduino Compatible.
- Compatible with Arduino UNO R3, Arduino UNO
Package Includes :
1 x Screw Shields V2 Terminal Expansion Board.
Screw Shields V2 Terminal Expansion Board Overview
The Screw Shields V2 Terminal Expansion Board is an Arduino-compatible shield that converts standard pin headers into secure screw terminals. Designed for the Arduino UNO R3 and UNO, it simplifies wiring by allowing you to clamp wires directly without soldering or loose jumper cables.
Key Features of Screw Shields V2 Terminal Expansion Board
- Genuine Screw Shields V2 board compatible with Arduino UNO R3 and UNO
- Secure I/O screw terminals for all digital, analog, power and ground pins
- Compact 66×19×16 mm size and lightweight 28 gm build
- Plug-and-play design mounts directly onto Arduino headers—no soldering required
- Stackable female headers allow additional shields to be added on top
- Fast Shipping from Zbotic: Quick dispatch across India
Applications and Use Cases
- Connecting temperature, humidity or gas sensors for environmental monitoring
- Wiring relays and actuators in home automation and IoT prototypes
- Prototyping robotics circuits with secure motor or servo connections
- Industrial control interfaces requiring vibration-resistant wiring
- Educational electronics kits where students frequently change wiring setups
- Data logging systems with multiple sensor inputs and power lines
How to Use Screw Shields V2 Terminal Expansion Board
Align the Screw Shields V2 board with the header pins of your Arduino UNO or UNO R3 and press down firmly until fully seated. Strip about 5 mm of insulation from each wire, insert the conductor into the appropriate screw terminal, and tighten with a small flat-head screwdriver. The board’s stackable female headers let you mount other shields on top while keeping all I/O and power lines accessible.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Which Arduino boards are compatible with the Screw Shields V2?
The Screw Shields V2 is specifically designed to plug into the header pins of Arduino UNO R3 and Arduino UNO boards, ensuring perfect alignment and full pin access.
What pins are broken out to screw terminals?
This board provides screw terminals for every Arduino UNO digital pin (D0–D13), analog input (A0–A5), 5V, 3.3V and GND rails, giving you secure connections for all I/O and power lines.
Can I stack other shields on top of the Screw Shields V2?
Yes. The Screw Shields V2 features female header sockets that expose all Arduino pins on top, allowing you to add additional expansion shields while maintaining secure screw-terminal wiring below.
Arduino Smart Dustbin: Ultrasonic Sensor Auto-Open Lid
Table of ContentsIntroductionComponents and Hardware SetupWiring Diagram and ConnectionsComplete Code with ExplanationCustomization and ImprovementsTroubleshooting Common IssuesAdvanced Features and...
Read More →
ATtiny85 Digispark Projects: Tiny USB Gadgets for Beginners
The Digispark ATtiny85 is arguably the coolest little microcontroller board you can buy for under ₹150. About the...
Read More →
Arduino Multitasking Guide: millis() Instead of delay()
The single biggest step-up in Arduino programming skill is moving from delay() to millis()-based timing. While delay() is...
Read More →Technical Specifications
| SKU | AI2590 |
|---|---|
| Weight | 0.0351 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Screw Shields V2 Terminal Expansion Board is a versatile shield for arduino used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
