Product Decription
- Building on the FlySky iA6B receiver, FlySky now introduces the 10-channel FlySky FS-IA10B Radio Receiver. Like the FS-iA6B, the iA10B supports iBUS, SBUS, PPM, and PWM for enhanced control.
- The advantage of PPM/SBUS over traditional PWM channels is the reduction to a single signal wire, simplifying wiring for PPM-compatible flight controllers like the Naze32. Additionally, with optional telemetry sensors, the receiver can monitor flight battery voltage and even motor RPM.
- Designed as a full 10-channel receiver, the FS-IA10B is versatile enough for various model types and is considered “full range,” suitable for both larger and smaller models. Its dual antennas provide exceptional reception, with reported ranges exceeding 1km, and excellent interference rejection. For optimal performance, position the antennas at a 90-degree angle to each other.
- While the FS-IA10B is slightly larger than the FS-iA6B, it remains compact and features end-on connectors for neat installations in tight spaces.
- Binding the RX (Receiver) to the TX (Transmitter):
1. Insert the bind plug into the BAT port and power on the plane or helicopter; the LED should start flashing (ensure the RX is powered via the ESC).
2. Press and hold the bind button on the transmitter module while turning on the TX. The light should become steady.
3. Release the bind button, power off the plane or helicopter, remove the bind plug, and then turn off the TX.
4. Finally, turn on the TX followed by the plane or helicopter.
Compatible Radios:
- Flysky i4
- Flysky / Turnigy i6
- Flysky / Turnigy i10
- Flysky FS-i10
- FS-GT2E
- FS-GT2G
Note:
If you want to use PPM, remember to enable the setting on your transmitter.
Features:
- Reliable, interference-free 2.4GHz AFHDS 2A signal operation
- Compact, lightweight design
- Dual antennas for reliable, interference-free operation
- Connection ports for use with optional telemetry sensors
Package Includes:
- 1 x FlySky FS-IA10B Radio Receiver
- 1 x Bind Plug
Video
DIY Drone Payload Release Mechanism: Step-by-Step Build
Table of ContentsIntroduction: Why Add a Payload Release to Your Drone?Types of Payload Release MechanismsComponents RequiredBuilding a Servo-Based...
Read More →
FPV Drone LiPo Battery Maintenance: Storage and Longevity Guide
FPV Drone LiPo Battery Maintenance: Storage and Longevity Guide Your LiPo batteries are quite possibly the most expensive...
Read More →
Drone ESC Explained: How to Choose the Right Speed Controller
The drone ESC (Electronic Speed Controller) is the unsung hero of every multirotor build. It sits between your...
Read More →Technical Specifications
| Brand | Flysky |
|---|---|
| Model | FS-IA10B |
| SKU | AI1241 |
| Weight | 0.03 kg |
| Availability | In Stock |
Applications & Use Cases
The FlySky FS-IA10B Radio Receiver is a versatile drone transmitter and receiver used across a wide range of applications including FPV drone control, RC aircraft, ground vehicles, and long-range drone operations.
Common use cases:
- Setting up a new FPV quad with digital link
- Replacing a receiver after a crash
- Building a long-range fixed-wing aircraft
This product is ideal for FPV pilots, RC hobbyists, and drone builders.
Technical Tip: ELRS (ExpressLRS) offers excellent range and low latency at 2.4GHz. Ensure your transmitter and receiver use the same protocol.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Flysky product sourced from authorized channels
Farhan Khurana –
Perfect for my agriculture drone project. This FlySky FS-IA10B Radio Receiver handles the weight effortlessly.
Vijay Mishra (verified owner) –
This FlySky FS-IA10B Radio Receiver is value for money. Comparing with other brands, Zbotic offers the best deal.
Naveen Malhotra (verified owner) –
This FlySky FS-IA10B Radio Receiver is value for money. Comparing with other brands, Zbotic offers the best deal.
Tejas Goyal (verified owner) –
Pretty good FlySky FS-IA10B Radio Receiver. Works as expected for my drone project. Would buy again.
Rishabh Kulkarni (verified owner) –
Superb FlySky FS-IA10B Radio Receiver! Built my first drone with this and it performed beyond expectations.
Girish Arora –
Very impressed with this FlySky FS-IA10B Radio Receiver. My drone’s performance improved noticeably.
Aanya Reddy –
Pretty good FlySky FS-IA10B Radio Receiver. Works as expected for my drone project. Would buy again.
Ashwin Bhat (verified owner) –
Decent FlySky FS-IA10B Radio Receiver for the price. Using it in my quadcopter, performs well overall.
Bharat Goyal –
Good product overall. My drone is flying well with this FlySky FS-IA10B Radio Receiver. Satisfied with the purchase.
Hitesh Mukherjee (verified owner) –
My 5th order from Zbotic. This FlySky FS-IA10B Radio Receiver is excellent as always. Totally reliable store.
Aarav Batra –
This FlySky FS-IA10B Radio Receiver is exactly what I needed for my drone. Works perfectly, very reliable.
Lalit Mehta (verified owner) –
My 5th order from Zbotic. This FlySky FS-IA10B Radio Receiver is excellent as always. Totally reliable store.
Rishabh Rajan (verified owner) –
Good product overall. My drone is flying well with this FlySky FS-IA10B Radio Receiver. Satisfied with the purchase.
Vansh Hegde –
Excellent FlySky FS-IA10B Radio Receiver! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Lokesh Batra (verified owner) –
Good quality FlySky FS-IA10B Radio Receiver. Minor scratches on arrival but functionally perfect.
Parth Arora (verified owner) –
Solid FlySky FS-IA10B Radio Receiver. Not the absolute best but excellent value for the price point.
Devansh Parekh (verified owner) –
Perfect for my agriculture drone project. This FlySky FS-IA10B Radio Receiver handles the weight effortlessly.
Mohit Agarwal (verified owner) –
Okay FlySky FS-IA10B Radio Receiver. Gets the job done for my basic drone project. Nothing exceptional.