Build Hat Power Supply

Looking for Build Power Supply? Build Hat Power Supply is available at Zbotic with fast shipping across India.

Build Hat Power Supply

The Raspberry Pi Build HAT Power Supply is a 48W (8V DC, 6A) power supply that is officially released by Raspberry Pi. It is designed to power the Raspberry Pi Build HAT and the Raspberry Pi computer, as well as the LEGO Technic motors and sensors that are compatible with the Build HAT. The Build HAT enables you to use Raspberry Pi computing with LEGO Education SPIKETM Portfolio to create innovative and sturdy projects. You can connect the power supply to the Build HAT or the Raspberry Pi directly.

Features

• Input: 110-240V AC
• Output: 8V DC, 6A
• Cable: 1.5M, 16 awg (Premium Quality)

Specification:

Technical Specifications:

Output

1. Output voltage: +8.0V DC.
2. Minimum load current: 0.01A
3. Nominal load current: 6.0A
4. Maximum power: 48.0W
5. Load regulation: ±5%
6. Line regulation: ±5%
7. Ripple & noise: 200mVp-p.
8. Rise time: 100ms maximum to regulation limits for DC outputs
9. Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
10. Protection: Short circuit protection, Overcurrent protection, Overvoltage protection
11. Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%)
12. Output cable: 1.5m 16AWG.
13. Output connector: Barrel connector 5.5mm × 2.1mm × 11mm Centre positive.

Input

1. Voltage range: 100-240Vac (rated) 96-264Vac (operating)
2. Frequency: 50/60Hz ±3Hz
3. Current: 1.2A maximum
4. Power consumption (no load): 0.1W maximum
5. Inrush current: No damage shall occur, and the input fuse shall not blow.

Package Includes

• 1 x Raspberry Pi Build Hat Power Supply

Datasheet

Build Hat Power Supply Overview

The Build Hat Power Supply is an official Raspberry Pi 48W (8V DC, 6A) adapter designed specifically for the Raspberry Pi Build HAT and compatible LEGO Technic motors and sensors. It provides stable power to both your Raspberry Pi computer and connected Build HAT accessories for educational or prototyping projects.

Key Features of Build Hat Power Supply

• Official Raspberry Pi 48W output with 8.0 V DC at up to 6 A, ideal for Build HAT and LEGO motors
• Universal 110–240 V AC input for use across India without voltage converters
• 1.5 m premium-quality 16 AWG cable for reliable power delivery and flexible setup
• Load and line regulation within ±5% to ensure consistent voltage under varying loads
• Minimum load current of 0.01 A to support light-load scenarios and prevent undervoltage
• Fast shipping available from Zbotic across India for rapid delivery

Applications and Use Cases

• Powering Raspberry Pi Build HAT in robotics and STEM education kits
• Driving multiple LEGO Technic motors and sensors simultaneously
• Developing Pi-based automation or control systems with high-current requirements
• Prototyping IoT devices that integrate the Build HAT for mechanical projects
• Classroom workshops where stable, high-current power is needed for student builds

How to Use Build Hat Power Supply

Simply connect the AC plug into a 110–240 V mains outlet, then attach the 8 V DC cable to the power input on the Raspberry Pi Build HAT or directly to the Raspberry Pi board. Ensure the Build HAT is seated on the GPIO header before powering up, and verify that connected LEGO motors and sensors receive stable voltage for reliable operation.

Why Buy from Zbotic?

• Genuine Products: All items sourced from authorized distributors
• Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
• Free Shipping: Free delivery on qualifying orders
• COD Available: Cash on Delivery, UPI, cards, net banking
• Technical Support: Expert help for setup and troubleshooting
• Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

Can I use this power supply with LEGO Technic motors via Build HAT?

Yes, the Build Hat Power Supply is tailored to drive LEGO Technic motors and sensors when connected through the Raspberry Pi Build HAT, providing stable 8 V DC at up to 6 A.

What is the cable length and gauge of this power supply?

This power supply includes a 1.5 m long, 16 AWG premium-quality cable for durable, flexible connections between the mains outlet and your Build HAT or Raspberry Pi.

Does this power supply work with 110–240 V AC mains?

Absolutely. The Build Hat Power Supply accepts an input range of 110–240 V AC, making it compatible with standard Indian power outlets without any additional converters.

Related Articles:

Raspberry Pi Barcode Scanner: Build a Retail Scan System

A Raspberry Pi barcode scanner system is a game-changer for small retailers, warehouses, libraries, and inventory managers across...

Read More →

Raspberry Pi Alarm System: PIR, Buzzer and SMS Alert Build

A DIY home security alarm using Raspberry Pi is one of the most practical electronics projects you can...

Read More →

Raspberry Pi Bitcoin Node: Run Your Own Full Node

Table of Contents Why Run a Bitcoin Full Node Hardware Requirements for a Full Node Installing Bitcoin Core...

Read More →