Looking for Nextion Intelligent Nx8048p050_011c_y Display? Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive Touch Display with Enclosure is available at Zbotic with fast shipping across India.
Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive Touch Display with Enclosure
Description:
Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive Touch Display with an enclosure that comes with a Capacitive touch display. This display is from the Newly launched Intelligent series and is very easy to use and can be interfaced to the Microcontroller using a simple UART port. The Nextion display can be easily interfaced with any Microcontroller using just 2 wires. Nextion displays have a built-in microcontroller that controls the display, it takes care of which button has been clicked, creating text, storing images, or change the background. The Nextion display then communicates with your microcontroller using serial communication at a 9600 baud rate.
NX8048P050_011C_Y is a 5.0″ Nextion Capacitive touchscreen display with an enclosure that comes with a Capacitive touch display is so simple to the interface that it can easily work with Arduino, Raspberry Pi, ESP8266, ESP32, PIC Microcontroller, AVR controller, ARM Microcontroller and you won’t believe it will work even with basic 8051 microcontrollers basically it will work with any board or Microcontroller that has UART port.
Note: The small power supply test board and connecting wire inside the package allow you to test if the electrical supply is enough or not. See the image below on how to use it.
Features:
- 5.0” LCD-TFT HMI display module
- RGB 65K true-to-life colors
- Capacitive touch panel
- 300 nit Brightness
- Onboard 200MHz MCU
- 512 KB of SRAM
- 128 MB of Flash memory
- 1024 Byte EEPROM
Datasheet:
https://nextion.tech/datasheets/nx8048p050-011c-y/
Package Includes:
1 x Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive Touch Display with enclosure
About Nextion Intelligent Nx8048p050_011c_y Display
Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive Touch Display with Enclosure is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Nextion, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Nextion
- SKU: AI1829
- Category: HMI LCD Display
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about Nextion Intelligent Nx8048p050_011c_y Display and other products.
Applications
Nextion Intelligent Nx8048p050_011c_y Display can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your Nextion Intelligent Nx8048p050_011c_y Display today and start building.
About Nextion Intelligent Nx8048p050_011c_y Display
Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive Touch Display with Enclosure is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Nextion, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Nextion
- SKU: AI1829
- Category: HMI LCD Display
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about Nextion Intelligent Nx8048p050_011c_y Display and other products.
Applications
Nextion Intelligent Nx8048p050_011c_y Display can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your Nextion Intelligent Nx8048p050_011c_y Display today and start building.
Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive Overview
The Nextion Intelligent NX8048P050_011C_Y is a 5.0″ capacitive touch human-machine interface display with an integrated enclosure. It features a 200 MHz onboard MCU, 512 KB SRAM, 128 MB flash memory, 1 KB EEPROM and 300 nit brightness, making it ideal for interactive control panels and embedded applications.
Key Features of Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive
- 5.0″ capacitive touchscreen with 300 nit brightness for clear and responsive visuals
- Built-in 200 MHz microcontroller, 512 KB SRAM, 128 MB flash and 1 KB EEPROM for graphics and event handling
- Simple UART interface requiring only two signal lines for seamless microcontroller integration
- Durable plastic enclosure included for secure mounting and protection in industrial or prototyping setups
- On-display processing handles touch events, image rendering and text without overloading the host MCU
- Genuine Nextion module with fast shipping across India from Zbotic
Applications and Use Cases
- Industrial control panels for machinery monitoring and parameter adjustment
- Home automation dashboards to manage lighting, HVAC and security systems
- 3D printer or CNC machine interfaces for manual controls and status display
- Point-of-sale terminals and kiosk displays requiring compact touch HMI
- Medical device screens for patient monitoring or equipment settings
- Educational and prototyping projects involving interactive user interfaces
How to Use Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive
Mount the display into its enclosure, connect power and the two UART lines (TX/RX) to your microcontroller, then design your UI screens in the Nextion Editor software. Compile your project to a .HMI file and upload it via the microSD slot or USB-TTL adapter. Once loaded, use simple serial commands to navigate pages, update text or respond to touch events in your embedded program.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Can I interface this display with Arduino?
Yes. The Nextion NX8048P050_011C_Y communicates over a standard UART interface, allowing you to connect directly to Arduino TX/RX pins and control the HMI via serial commands.
How do I upload a custom UI to the display?
Use the Nextion Editor to design and compile your interface into a .HMI file, then upload it through the microSD card slot on the enclosure or via a USB-to-TTL serial adapter.
Does the kit include an enclosure?
Yes. This product ships with a tailored plastic enclosure that provides secure mounting and protection for the 5.0″ capacitive touch display.
Arduino DMA Explained: Direct Memory Access for Speed
If you've ever wondered how to push your Arduino project beyond the limits of traditional data transfer, understanding...
Read More →
How to Use Relay Module with Arduino (1, 2, 4, 8 Channel)
An Arduino relay module is the bridge between the low-voltage world of microcontrollers and real-world AC appliances like...
Read More →
Arduino Automatic Plant Monitor: Sunlight, Moisture, Temperature
Table of ContentsIntroductionComponents and Hardware SetupWiring Diagram and ConnectionsComplete Code with ExplanationCustomization and ImprovementsTroubleshooting Common IssuesAdvanced Features and...
Read More →Technical Specifications
| Brand | Nextion |
|---|---|
| Package Quantity | 8048 pcs |
| SKU | AI1829 |
| Weight | 0.34 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive Touch Display with Enclosure is a versatile hmi lcd display used across a wide range of applications including industrial HMI panels, factory automation displays, smart home control, CNC machine interfaces, and medical equipment displays.
Common use cases:
- Building a touchscreen control panel for machinery
- Displaying real-time sensor data in a factory
- Creating a smart thermostat interface
This product is ideal for industrial automation engineers and embedded system developers.
Technical Tip: HMI displays with built-in controllers (Nextion, STONE) simplify development — just send serial commands from your MCU.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Nextion product sourced from authorized channels
Kunal Trivedi (verified owner) –
Love this Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. My weather station display looks professional with this.
Milan Sethi (verified owner) –
Perfect Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive for my dashboard project. Easy to code with available libraries.
Jai Deshpande (verified owner) –
Great Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. Backlight is even and text is very readable. Recommended!
Divyansh Bhandari (verified owner) –
Very satisfied with this Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. I2C interface makes wiring simple.
Sameer Rao (verified owner) –
Great Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. Backlight is even and text is very readable. Recommended!
Rahul Malhotra –
Good Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. Contrast is nice. Had to adjust potentiometer for optimal view.
Hitesh Naidu –
Excellent Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive! Display is bright and clear. Easy to interface with Arduino.
Sandeep Shetty (verified owner) –
Great Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. Backlight is even and text is very readable. Recommended!
Atharv Parekh (verified owner) –
Love this Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. My weather station display looks professional with this.
Rashmi Choudhury –
Nice Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. Readable and bright enough for indoor projects.
Aditi Shetty (verified owner) –
Decent quality Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. All pins working. Good for the price.
Rishabh Vohra (verified owner) –
Good Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. Contrast is nice. Had to adjust potentiometer for optimal view.
Chetan Kamath –
Very satisfied with this Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. I2C interface makes wiring simple.
Parth Shah (verified owner) –
Decent quality Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. All pins working. Good for the price.
Chirag Gill (verified owner) –
This Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive is crisp and readable even in sunlight. Great for outdoor projects.
Nikita Nayak (verified owner) –
Very satisfied with this Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. I2C interface makes wiring simple.
Eshan Ghosh (verified owner) –
Excellent Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive! Display is bright and clear. Easy to interface with Arduino.
Sandhya Saini (verified owner) –
Excellent Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive! Display is bright and clear. Easy to interface with Arduino.
Kritika Dhawan (verified owner) –
Great Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. Backlight is even and text is very readable. Recommended!
Kritika Tiwari (verified owner) –
Excellent Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive! Display is bright and clear. Easy to interface with Arduino.
Rishabh Patil (verified owner) –
This Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive is perfect for beginners. Connected to my Arduino in minutes.
Shreyas Bhandari (verified owner) –
Good Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. Contrast is nice. Had to adjust potentiometer for optimal view.
Vikram Verma (verified owner) –
Average Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive. Works but brightness is lower than I expected.
Tanvi Mehta (verified owner) –
Perfect Nextion Intelligent NX8048P050_011C_Y HMI 5.0″ Capacitive for my dashboard project. Easy to code with available libraries.