FrSky 2.4GHz Taranis Q X7 Access Transmitter (White) with FrSky RX8R Pro Receiver

This is the White variant of the FrSky 2.4GHz Taranis Q X7 Access Transmitter (White) with FrSky RX8R Pro Receiver in Drone Transmitter and Receiver. Available at ₹15,799.00 (₹13,388.98 + GST) with free shipping across India.

Looking for Rx8r Receiver 2.4ghz? FrSky 2.4GHz Taranis Q X7 Access Transmitter (White) with FrSky RX8R Pro Receiver is available at Zbotic with fast shipping across India.

Rx8r Receiver 2.4ghz – Product Description

• FrSky 2.4GHz Taranis Q X7 Access Transmitter (White) with FrSky RX8R Pro Receiver

• The X7 ACCESS features 24 channels with a faster baud rate and lower latency thanks to its high-speed module digital interface. As with the rest of the ACCESS transmitters, it provides a secure and reliable link, along with wireless firmware updating making it fully compatible with our newest line of OTA receivers. The battery compartment now uses 2 18650 Li-Ion batteries and can be balance charged via the Mini USB interface.

• The Taranis mixes the power of the “OPEN TX” open-source software with an ergonomic case with 6 programmable switches (4 x 3-position, 1 x 2-position, 1 x momentary) and two twists knobs. Set up your switches and controls how you want them.
• Additionally, this Remote control System is compatible with the FrSky R9M 2019 Module which offers 4 switchable RF power outputs so you can choose the appropriate power for different flight situations and Long-range of remote control

• Alerts can be presented in the form of audio speech outputs, sound or vibration alerts making this extremely user-friendly. The MicroSD card slot offers unlimited model memory options, it also has a USB port for upgrades and to connect to a PC for adjusting settings. As well as this there is the ability to use all your model files from the older TARANIS X9D/X9D Plus/X9E making it easy to get the new system up and working.

Image: Battery Section comes with 2 x 18650 Battery Holder

Note: Please be aware of the ACCESS protocol’s new features, benefits, and requirements. You can learn all about it on 

Note: Due to Air shipping limitations, this Radio System does not come with the 2S battery needed for it. you have to buy it separately  Battery Slot size is 92 x 57 x 18 mm (L x W x H)

Features:

• Ergonomic and compact design
• Open-source operating system
• Installed with ACCESS protocol
• High-speed module digital interface
• Supports spectrum analyzer function
• Supports wired training function
• Quad Ball Bearing Gimbals
• Compatible with 2S battery with 3pin JST (XH) connector [Battery Slot size is 92 x 57 x 18 mm (L x W x H)]
• Audio Speech Outputs (values, alarms, settings, etc.)
• Real-time Flight Data Logging
• Receiver Signal Strength Indicator (RSSI) Alerts
• Super Low Latency
• Vibration Alerts
• Model files are compatible with TARANIS X9D/X9D Plus/X9E.
• Open source firmware OpenTx installed.
• Haptic vibration alerts and voice speech outputs
• Easily accessible battery compartment
  (*Batteries not included, adaptive with replaceable 18650 Li-ion batteries)

Package Included:

• 1 x FrSky 2.4GHz Taranis Q X7 Access Transmitter (White)
• 1 x FrSky RX8R Pro Receiver
• 1 x  Neck Strap and  Neck Strap Adapter
• 1 x USB type A to Mini USB Cable (50 cm)
• 1 x User Manual (English)

We have another variant with R9M 2019 Module and R9MX Receiver Click Here to see

FrSky 2.4GHz Taranis Q X7 Access Transmitter (White) with Overview

The FrSky 2.4GHz Taranis Q X7 Access Transmitter (White) bundled with the FrSky RX8R Pro Receiver is a compact, open-source radio control system for RC aircraft and drones. Featuring the ACCESS protocol, this combo delivers 24-channel control with low latency and secure telemetry feedback.

Key Features of FrSky 2.4GHz Taranis Q X7 Access Transmitter (White) with

• ACCESS protocol with 24 channels, high-speed baud rate and reduced latency for precision flying
• Open-source operating system supporting custom Lua scripts and wireless firmware updates
• High-speed module digital interface compatible with over-the-air receiver updates
• Dual power options: use two 18650 Li-Ion batteries or a 2S LiPo via 3-pin JST connector (92×57×18 mm slot)
• Built-in spectrum analyzer function for real-time signal scanning and interference checks
• Includes genuine FrSky RX8R Pro Receiver with full telemetry support and D8/D16 compatibility, fast shipping from Zbotic

Applications and Use Cases

• FPV racing drones where low latency and telemetry are critical
• Aerial photography multirotors requiring reliable range and channel mixing
• Fixed-wing aircraft using advanced flight modes and control mixes
• Helicopter models demanding precise cyclic and collective control
• DIY firmware development and script testing on an open-source platform
• Field frequency checks with the integrated spectrum analyzer before flights

How to Use FrSky 2.4GHz Taranis Q X7 Access Transmitter (White) with

Insert two charged 18650 cells or connect a 2S LiPo to the JST port, power on both transmitter and RX8R Pro receiver, then press the receiver’s bind button while powering it up. On the Q X7, enter the OpenTX menu, select ACCESS protocol, assign your model settings (default Mode 2), and use the spectrum analyzer to verify clear channels before takeoff.

Why Buy from Zbotic?

• Genuine Products: All items sourced from authorized distributors
• Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
• Free Shipping: Free delivery on qualifying orders
• COD Available: Cash on Delivery, UPI, cards, net banking
• Technical Support: Expert help for setup and troubleshooting
• Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

Can I update the transmitter and receiver firmware wirelessly?

Yes. The ACCESS protocol on the Q X7 supports over-the-air firmware updates for both the transmitter and RX8R Pro receiver via the high-speed digital interface.

What battery configurations are supported?

The Q X7 accommodates two 18650 Li-Ion cells in its removable holder or a 2S LiPo battery through a 3-pin JST connector in the 92×57×18 mm battery slot.

How do I bind the RX8R Pro receiver to the transmitter?

Power on the RX8R Pro while holding its bind button, then access the Bind menu on the Taranis Q X7, select the model, choose ACCESS protocol, and start binding. The receiver’s LED will confirm a successful link.

Related Articles:

Comparing Agricultural Drone Frames: EFT vs DJI Agras Parts

Choosing the right agricultural drone frame is the foundation of any crop spraying operation, and the EFT comparison...

Read More →

Mini Drone Build: 3-Inch Toothpick Quad for Beginners

Mini Drone Build: Complete Beginner's Guide to a 3-Inch Toothpick Quad The 3-inch toothpick quad is arguably the...

Read More →

Cinewhoop Build: Smooth Indoor Cinema Drone Guide

Table of Contents Understanding Cinewhoop Build Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation Practical Tips...

Read More →