5K Ohm Variable Resistor
The 5k ohm Trimpot RM065 Package is a type of variable resistor that is designed for straightforward installation on a printed circuit board (PCB) and can be adjusted with a screwdriver.
Also known as a preset, potentiometer, or trimpot, this component serves as a variable resistor and can be tuned to change the resistance in a circuit.
Trimpots are known for their high precision and come with three terminal pins for PCB mounting. Rotating the trimpot changes the voltage across its terminals. Generally, the outer two pins are connected to VCC (positive supply voltage) and ground (0V), and the middle pin delivers a variable voltage output ranging from 0V to VCC.
These variable resistors are used for adjusting voltage levels within a circuit as needed. Their single-turn design makes them ideal for setting precise values in a circuit.
Features
Model Type: RM065 Package
Resistance Value: 5k ohm
Resistance Tolerance: 5%
Package Includes
10 x 5K Ohm Variable Resistor – Trimpot
Datasheet:
5K Ohm Trim Pot: http://www.bc-robotics.com/datasheets/bourns5k25t.pdf
5K Ohm Variable Resistor-Trimpot Overview
The 5K Ohm Variable Resistor-Trimpot is a multiturn, top-slot adjustable preset designed for PCB mounting. Supplied in a pack of 10, each trimpot offers 5K Ω resistance with 10% tolerance and a 500 mW power rating for precise voltage trimming in electronic circuits.
Key Features of 5K Ohm Variable Resistor-Trimpot
- Resistance: 5K Ω nominal with ±10% tolerance for general-purpose trimming
- Power Rating: 500 mW (½ W) to handle small signal and low-power applications
- Multiturn Adjustment: Fine-tune resistance over multiple rotations via top slot
- PCB Mount (RM065 Package): Three PC-pin termination for secure through-hole soldering
- Pack of 10: Bulk quantities ideal for production runs or lab spares
- Genuine Product and Fast Shipping from Zbotic: Sourced from authorized distributors, dispatched within 24 hours
Applications and Use Cases
- Calibrating sensor input thresholds in analog front-ends
- Setting reference voltages in voltage regulator modules
- Adjusting bias currents in amplifier and op-amp circuits
- Fine-tuning LED brightness levels in indicator arrays
- Trimming timing circuits in RC networks
- Prototyping and circuit debugging in development boards
How to Use 5K Ohm Variable Resistor-Trimpot
Insert the three PC-pin leads of the trimpot into the matching holes on your PCB (RM065 footprint), solder them securely, then adjust the resistance by turning the top-slot screw with a small flathead screwdriver. Rotate multiple turns until the desired voltage or current level is achieved.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What is the power rating of the 5K Ohm Trimpot?
This trimpot is rated at 500 mW (½ W), suitable for low-power signal applications.
How is the resistance adjusted?
Adjustment is made via the top slot using a small flathead screwdriver; its multiturn design allows precise, gradual changes.
How do I mount this variable resistor on a PCB?
It features three PC-pin terminations compatible with the RM065 through-hole footprint; simply insert and solder the pins.
Technical Specifications
| Interface / Protocol | BLE |
|---|---|
| Package Quantity | 10 pcs |
| SKU | AI0272 |
| Weight | 0.0008 kg |
| Availability | Out of Stock |
Applications & Use Cases
The 5K Ohm Variable Resistor-Trimpot (Pack of 10) is a versatile potentiometer used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Ishaan Nair (verified owner) –
Average 5K Ohm Variable Resistor-Trimpot. Most are good quality but found a few out-of-spec pieces.
Nikhil Modi (verified owner) –
Outstanding quality! This 5K Ohm Variable Resistor-Trimpot is well sorted and labeled. Very convenient.
Hardik Saini –
Nice 5K Ohm Variable Resistor-Trimpot. Values are accurate. Good assortment for hobby projects.
Deepak Kapoor –
Very satisfied. My college lab is stocked with these. Excellent value from Zbotic.
Suresh Tandon (verified owner) –
Great quality 5K Ohm Variable Resistor-Trimpot. All values are within tolerance. Very reliable.
Anand Kamath (verified owner) –
This 5K Ohm Variable Resistor-Trimpot is essential for any electronics lab. Good quality components.
Aanya Khurana –
This 5K Ohm Variable Resistor-Trimpot saved me multiple trips to the electronics market. Everything I need in one pack.
Sahil Goyal –
Decent 5K Ohm Variable Resistor-Trimpot. Works well. Some tolerance variation but within acceptable limits.
Vinay Reddy (verified owner) –
Great quality 5K Ohm Variable Resistor-Trimpot. All values are within tolerance. Very reliable.
Pooja Garg (verified owner) –
This 5K Ohm Variable Resistor-Trimpot saved me multiple trips to the electronics market. Everything I need in one pack.
Vansh Tandon (verified owner) –
Decent 5K Ohm Variable Resistor-Trimpot. Works well. Some tolerance variation but within acceptable limits.
Nakul Batra (verified owner) –
Perfect 5K Ohm Variable Resistor-Trimpot for prototyping and production. Consistent quality.
Ravi Rao –
Nice 5K Ohm Variable Resistor-Trimpot. Values are accurate. Good assortment for hobby projects.
Sanjay Sharma (verified owner) –
This 5K Ohm Variable Resistor-Trimpot saved me multiple trips to the electronics market. Everything I need in one pack.
Mohit Deshpande (verified owner) –
Love this 5K Ohm Variable Resistor-Trimpot. Great variety and all components are genuine. Highly recommended.
Molin Ksoo (verified owner) –
Sandhya Sethi (verified owner) –
Superb 5K Ohm Variable Resistor-Trimpot! Using these in all my circuit designs. Never had a failure.
Harshit Chatterjee –
Love this 5K Ohm Variable Resistor-Trimpot. Great variety and all components are genuine. Highly recommended.
Ashwin Ghosh –
Perfect 5K Ohm Variable Resistor-Trimpot for prototyping and production. Consistent quality.
Saurabh Khurana (verified owner) –
Perfect 5K Ohm Variable Resistor-Trimpot for prototyping and production. Consistent quality.
Bharat Hegde (verified owner) –
Average 5K Ohm Variable Resistor-Trimpot. Most are good quality but found a few out-of-spec pieces.
Harshit Bhat –
Nice 5K Ohm Variable Resistor-Trimpot. Values are accurate. Good assortment for hobby projects.
Arun Shah (verified owner) –
Very satisfied. My college lab is stocked with these. Excellent value from Zbotic.
Kunal Bose (verified owner) –
Very satisfied. My college lab is stocked with these. Excellent value from Zbotic.
Sarika Bhat (verified owner) –
This 5K Ohm Variable Resistor-Trimpot is essential for any electronics lab. Good quality components.