0.1µF 50V Capacitor (Pack of 50)

This is the 50V variant of the 0.1µF 50V Capacitor (Pack of 50) in Through Hole Capacitor, Capacitor. Available at ₹30.68 (₹26.00 + GST) with free shipping across India.

0.1µF 50V Capacitor

A capacitor is a passive two-terminal electronic component that stores electrical energy in an electric field, functioning as a temporary battery. This non-ohmic component is ubiquitous in electrical circuits, serving various purposes such as filtering out the DC component, storing energy, and constructing RC/RLC filters.

The 0.1µF 50V capacitor, also known as a 100nF capacitor, is integral to electronic circuits for signal filtering, noise reduction, and energy storage. Its 0.1 microfarad capacitance effectively removes high-frequency noise and maintains stable voltage levels. The 50-volt rating ensures it operates reliably under voltage fluctuations. Found in a wide range of electronic devices, from audio amplifiers to microcontroller systems, its small size and dependable performance make it a favored choice for both hobbyists and professionals.

Features

Radial leaded aluminum electrolytic capacitors

Miniaturized 7mm height

Suitable for high density electronic equipment

Specification:

Capacitance: 0.1µF

Voltage Rating: 50V

Capacitor Terminals: Radial Leaded

Polarity: Polar

Package Includes

50 x 0.1µF 50V Capacitor

0.1µF 50V Capacitor Overview

The 0.1µF 50V Capacitor is a polarized, radial leaded, through-hole component designed for energy storage, signal filtering and voltage stabilization. With a 0.1 microfarad capacitance and 50-volt rating, it effectively smooths power rails and suppresses noise in a variety of electronic circuits.

Key Features of 0.1µF 50V Capacitor

• Capacitance: 0.1µF (100nF) for reliable energy storage and decoupling
• Voltage Rating: 50V maximum, suitable for low to medium voltage circuits
• Polarized Design: Positive and negative leads clearly marked for correct orientation
• Radial Leaded Through-Hole: Easy insertion and soldering on standard PCBs
• Bulk Pack of 50: Cost-effective supply for prototyping and production
• Fast Shipping from Zbotic: Dispatch within 24 hours with tracking

Applications and Use Cases

• Power supply smoothing on microcontroller and DSP boards
• Decoupling noise in audio amplifier circuits
• Timing network in RC oscillators and pulse generators
• Energy reservoir in camera flash or LED flash modules
• Stabilizing voltage rails in sensor interface circuits

How to Use 0.1µF 50V Capacitor

Identify the positive and negative leads on the capacitor—often marked by a stripe on the negative side—and insert the radial leads into the corresponding holes on your PCB. Solder the leads to the pads, trim excess lead length, and place the capacitor close to the voltage source or IC pins for optimal performance in filtering and decoupling applications.

Why Buy from Zbotic?

• Genuine Products: All items sourced from authorized distributors
• Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
• Free Shipping: Free delivery on qualifying orders
• COD Available: Cash on Delivery, UPI, cards, net banking
• Technical Support: Expert help for setup and troubleshooting
• Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

Are these capacitors polarized?

Yes, the 0.1µF 50V capacitors are polarized. The positive lead must be connected to the higher potential, and the negative lead—marked with a stripe—must go to the lower potential to prevent damage.

How many capacitors come in this pack?

This product includes 50 individual 0.1µF 50V capacitors, ideal for batch production or stocking up for multiple projects.

Can I use these capacitors for power supply decoupling in microcontroller circuits?

Absolutely. With their 0.1µF capacitance and 50V rating, they are well-suited for smoothing voltage fluctuations and reducing mid-frequency noise near microcontroller and logic IC power pins.