Looking for Holybro Remote Id Case? Holybro Remote ID With Case is available at Zbotic with fast shipping across India.
The Holybro RemoteID Module is an economical, compact, and light module that transmits UAV flight information via WiFi and Bluetooth. Compatible with both CAN and serial protocols, it is a radio module sanctioned by the FCC and CE. Running on open-source ArduRemoteID firmware, it offers a standard Remote ID solution aimed mainly at drone manufacturers and system integrators.
Note: This product, intended for the Standard Remote ID Solution and aimed at drone manufacturers and system integrators, requires you to undertake your own FAA approval process (DoC submission) in the USA. For the most current and precise information on this subject, please consult the official governance website of your country.
Features:
- Remote ID Broadcasting: Low-cost module broadcasting UAV flight data via WiFi and Bluetooth.
- Protocol Support: Supports CAN and serial protocols for versatile connectivity.
- Regulatory Compliance: FCC and CE-certified, designed for Standard Remote ID Solution.
- Open-Source Firmware: Runs on Espressif ESP-C3 with ArduRemoteID firmware.
- Compact and Lightweight: Small form factor with CNC case, antenna options, and M2 screw mount.
- Upgradeable and Versatile: Supports firmware upgrades via web interface, compatible with PX4 & Ardupilot.
specification
| Radio module | 1. Espressif ESP-C3 module. 2. Bluetooth and WiFi 2.4GHz (ERP): + 20 dBm (100 mW) 3. FCC & CE certified radio module |
|---|---|
| Firmware | 1 ArduRemoteID (https://github.com/ArduPilot/ArduRemoteID). 2. Supports upgrading firmware via the web interface (“OTA”) 3. Supported in PX4 & Ardupilot |
| Protocols | CAN & Serial |
| Interface | 1. 1x JST GH 4-pin CAN (CAN) port
2. 1x JST GH 6-pin TELEM (UART) port |
| Antenna Connector type | 1. On CNC Case: SMA connector 2. On PCB: IPEX Connector |
| Range | 5km detection range |
| Power | 5V supplied from TELEM or CAN port |
| LED lights | Bright RGB status LED |
| Size | 1. Without case: 35.3 x 23.5 mm (not including antenna)
2. With CNC case: 38 x 26.5 x 11.5 mm (not including antenna) |
| Mount | M2 screws |
| Operating temperature | -40°C to +85°C |
Package Includes：
1x Remote ID
1x Antenna
1x JST GH 6pin 150mm Cable
1x JST GH 4pin 150mm Cable
Holybro Remote ID With Case Overview
The Holybro Remote ID With Case is a compact, lightweight module designed to broadcast UAV flight information over WiFi and Bluetooth. Housed in a protective enclosure, it integrates easily with drone flight controllers via CAN or serial interfaces, providing a compliant Remote ID solution for manufacturers and system integrators.
Key Features of Holybro Remote ID With Case
- Compact and lightweight design for easy integration into drone frames
- Transmits flight data over both WiFi and Bluetooth for flexible ground-station reception
- Supports CAN and UART serial protocols to interface with a range of flight controllers
- FCC and CE certified radio module with open-source ArduRemoteID firmware
- Durable protective case included to guard against vibration and moisture
- Low-cost, small-size solution with fast shipping from Zbotic across India
Applications and Use Cases
- Integrating Remote ID compliance into commercial mapping and surveying drones
- Upgrading hobbyist or prosumer UAV builds to meet emerging regulatory requirements
- OEM system integrators embedding standard Remote ID functionality in custom platforms
- Research and development prototypes that require real-time flight data broadcasting
- Rental and inspection drone fleets needing fleet-wide identification tracking
How to Use Holybro Remote ID With Case
Mount the module within its protective case onto your drone frame, then connect the power, CAN or serial data lines to your flight controller. Power the unit from the drone’s 5–12 V rail, configure the ArduRemoteID parameters via the built-in WiFi or Bluetooth setup utility, and verify live broadcasting of your UAV’s ID and position from a nearby ground station.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Q: Which data protocols does the Holybro Remote ID support?
The module supports both CAN bus and UART serial (TTL) interfaces, making it compatible with most popular flight controllers used by drone manufacturers and integrators.
Q: Is FAA approval required when using this Remote ID module?
Yes. While the module itself is FCC and CE certified, drone manufacturers or operators must complete their own FAA Declaration of Conformity (DoC) process in the USA to comply with Standard Remote ID regulations.
Q: What broadcast range can I expect over WiFi and Bluetooth?
Typical Bluetooth Low Energy range is up to 100 meters in open areas, while WiFi can reach around 50 meters, though actual performance depends on environmental factors and antenna placement.
Technical Specifications
| Brand | Holybro |
|---|---|
| SKU | AI6051 |
| Availability | Out of Stock |
Applications & Use Cases
The Holybro Remote ID With Case is a versatile fpv antennas and trans-receivers used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Holybro product sourced from authorized channels
Sachin Tiwari (verified owner) –
Decent Holybro Remote ID With Case. Took some effort to set up but working now.
Ananya Chatterjee (verified owner) –
Excellent product for the price. My drone flies smoothly with this Holybro Remote ID With Case. Highly recommended!
Sameer Naidu –
Nice Holybro Remote ID With Case, does the job. Delivery took a couple of extra days but product is solid.
Kabir Singh (verified owner) –
Using this Holybro Remote ID With Case in my hexacopter. Smooth operation and excellent thrust.
Amit Panchal (verified owner) –
Using this Holybro Remote ID With Case in my FPV drone build. Quality is top notch. Very happy with the purchase.
Jayesh Rawat (verified owner) –
Been using this Holybro Remote ID With Case for 3 months now, zero issues. Great product.
Naman Iyer (verified owner) –
Perfect for my agriculture drone project. This Holybro Remote ID With Case handles the weight effortlessly.
Diya Sen (verified owner) –
Nice Holybro Remote ID With Case, does the job. Delivery took a couple of extra days but product is solid.
Sneha Joshi –
Using this Holybro Remote ID With Case in my hexacopter. Smooth operation and excellent thrust.
Lakshya Gupta –
Been using this Holybro Remote ID With Case for 3 months now, zero issues. Great product.
Varun Mukherjee –
Excellent Holybro Remote ID With Case! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Sahil Patel (verified owner) –
Received the Holybro Remote ID With Case in great condition. Testing done, everything works perfectly.
Prashant Solanki (verified owner) –
Using this Holybro Remote ID With Case in my FPV drone build. Quality is top notch. Very happy with the purchase.