The Pixhawk® 6C represents the newest addition to the esteemed Pixhawk® flight controller lineage, adhering to the Pixhawk® FMUv6C Open Standard and Connector Standard. It arrives with the PX4 Autopilot® already installed. Within the Pixhawk® 6C lies an STM32H743 from STMicroelectronics®, coupled with advanced sensor technology from Bosch® and InvenSense®, offering both flexibility and dependability for managing any autonomous vehicle, making it ideal for academic and commercial use alike.
The Pixhawk® 6C features an H7 microcontroller that includes the Arm® Cortex®-M7 core, which operates at up to 480 MHz, and is equipped with 2MB of flash memory and 1MB of RAM. The enhanced processing capabilities enable developers to work more productively and efficiently, facilitating the use of complex algorithms and models. The FMUv6C open standard is equipped with high-performance, low-noise IMUs, aiming for cost-effectiveness with IMU redundancy. It also boasts a vibration isolation system to sift through high-frequency vibrations and diminish noise, ensuring precise measurements and enabling vehicles to achieve superior flight performance. The Pixhawk® 6C is an excellent resource for developers in corporate research labs, startups, academia (including researchers, professors, and students), and for commercial endeavors.
Features:
- High performance H7 Processor with clock speed up to 480 MHz
- New cost-effective design with low-profile form factor
- Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
- Newly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
Specification-
| Model No. | 6C PM02 M9N |
|---|---|
| Product Name | Autopilot flight controller |
| Connector | XT60 |
| Processor | H7 micro-controller contain the Arm Cortex-M7 core |
| Clock Speed | 480 MHz |
| RAM | 1MB |
| Flash Memory | 2MB. |
| GPS | M9N |
| Shipping Weight | 0.295 kg |
| Shipping Dimensions | 15 × 13 × 5 cm |
Package Includes:
1 x Pixhawk 6C Flight Controller Module (Plastic Case)
1 x PM02 V3 12S Power Module
1 x Cable Set
1 x M9N GPS
How to Solder Drone ESC and Motors: Beginner Tutorial
How to Solder Drone ESC and Motors: Beginner Tutorial Soldering is the single most important skill you will...
Read More →
How to Build a Drone from Scratch: Complete Guide (India)
Learning how to build a drone from scratch is one of the most rewarding DIY projects in electronics....
Read More →
How to Configure ArduPilot on Pixhawk: Step-by-Step Guide
Pixhawk is the most widely used open-source flight controller in the world, and ArduPilot is the firmware that...
Read More →Technical Specifications
| Brand | Holybro |
|---|---|
| Model | PM02 |
| Discharge Rate | 6C |
| SKU | AI5716 |
| Weight | 0.329000 kg |
| Availability | In Stock |
Applications & Use Cases
The Holybro Pixhawk 6C PM02 M9N combo kit is a versatile flight controller & accessories used across a wide range of applications including autonomous drones, FPV racing quadcopters, agricultural drones, and surveying and mapping platforms.
Common use cases:
- Central brain for drone stabilization and navigation
- GPS waypoint missions for surveying
- Acro mode flying for FPV freestyle
This product is ideal for drone builders requiring precise flight control.
Technical Tip: F4 processors are good for basic builds; F7 or H7 recommended for advanced features. Ensure firmware compatibility (Betaflight, ArduPilot, iNAV).
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Holybro product sourced from authorized channels
Vansh Bhandari –
Been using this Holybro Pixhawk 6C PM02 M9N combo for 3 months now, zero issues. Great product.
Aryan Mishra (verified owner) –
Very impressed with this Holybro Pixhawk 6C PM02 M9N combo. My drone’s performance improved noticeably.
Shreyas Ghosh (verified owner) –
Decent Holybro Pixhawk 6C PM02 M9N combo for the price. Using it in my quadcopter, performs well overall.
Sunil Choudhury (verified owner) –
Pretty good Holybro Pixhawk 6C PM02 M9N combo. Works as expected for my drone project. Would buy again.
Shubham Bisht –
Pretty good Holybro Pixhawk 6C PM02 M9N combo. Works as expected for my drone project. Would buy again.
Meera Dhillon (verified owner) –
Solid Holybro Pixhawk 6C PM02 M9N combo. Not the absolute best but excellent value for the price point.
Vansh Vyas (verified owner) –
Nice Holybro Pixhawk 6C PM02 M9N combo, does the job. Delivery took a couple of extra days but product is solid.
Piyush Tiwari (verified owner) –
Great quality Holybro Pixhawk 6C PM02 M9N combo. Perfect specs for my drone project. Fast delivery too!
Kavya Nayak –
Bought this for my college drone project. Works great, professor was impressed!
Aarav Iyer (verified owner) –
Excellent Holybro Pixhawk 6C PM02 M9N combo! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Aditi Bose (verified owner) –
Great quality Holybro Pixhawk 6C PM02 M9N combo. Perfect specs for my drone project. Fast delivery too!
Rakesh Srivastava –
Solid Holybro Pixhawk 6C PM02 M9N combo. Not the absolute best but excellent value for the price point.