This is the 8V variant of the 3S 10A Li-ion 18650 Charger Protection Board Module 10.8V 11.1V 12.6V in Battery Protection Board. Available at ₹109.74 (₹93.00 + GST) with free shipping across India.
The 3S 10A Li-ion 18650 Charger Protection Board Module is designed for 11.1V to 12.6V lithium-ion battery packs, making it ideal for applications like electric drills, sprayers, LED lights, and low-power inverters. This protection board offers the following key features:
Auto Recovery Function: Automatically restores the system in case of fault conditions, ensuring long-term reliability.
Low Load Resistance: Integrates 10 low-resistance MOSFETs for efficient power management.
Continuous Discharge: Supports up to 6A continuous discharge and balances up to 100mA of current for optimal battery performance.
Wide Compatibility: Works with 3.6V or 3.7V nominal voltage lithium batteries, including 18650, 26650, and polymer lithium cells, with a charging voltage range between 16.8V and 18.1V.
Current Limit: Features a 6A continuous charge current limit, making it suitable for drills with a starting current of up to 80A and power requirements below 135W (with balancing).
Compact and Easy to Insta: The module is small (50 x 16 x 3.4 mm) and can easily be mounted on battery packs or in tight spaces.
This protection board ensures safe and efficient charging and discharging of your lithium battery, while also balancing the cells to maximize their lifespan.
Applicable Scope
This power range is suitable for a variety of products, including battery packs for massagers, LED lights with standby power, 12V electronic devices, solar street light battery packs, backup power for monitors, and more.
Note: For products that draw more than 3A of current, the battery’s discharge rate should be at least 3C to ensure optimal performance.
Precautions:
1. Please strictly follow the wiring 0V (B -), 3.7V (B1), 7.4V (B2), 11.1V (B ), do not deliberately short circuit.
2. Please charge after connecting the line, then it will have output.
3. When connecting three groups of batteries, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. Discharge test, the voltage drops quickly when the group of battery time difference battery.
4. Please do not mix the battery and the poor battery together! 3 sets of battery capacity/resistance closer to the better! (Two good batteries 1 a poor battery use effect = 3 poor battery use effect).
Specifications and Features:
- Charging Voltage: 12.6V-13V
- Overcharge Voltage Range: 4.25V-4.35V ± 0.05V
- Overpressure Voltage Range: 2.3V-3.0V ± 0.05V
- Upper Limit Operating Current: 5A-6A
- Upper Limit Instantaneous Current: 10A
- Quiescent Current: less than 30uA
- Internal Resistance: less than 45mohm
- Effective Life: more than 50,000 hours
- Operating Temperature: -40- 50 degrees
- Storage Conditions: -40- 80 degrees3S 11.1V 12.6V 6A 18650 lithium battery protection board (comes with recovery function-AUTO Recovery)
- Application: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650.26650, a polymer lithium battery)
- Continuous discharge current (upper limit): 10A (if the cooling environment is not good, please reduce the load current use)
- Continuous charge current (upper limit): 6A.
Specification:
| Battery | 3 Cell |
|---|---|
| Overcharge detection voltage (V) | 4.25 ± 0.025 |
| Over-discharge detection voltage (V) | 2.50 ± 0.08 |
| Over current Protection (A) | 10 |
| Working current (A) | 5 ~ 6 |
| Operating Temperature (°C) | -40 ~ +85 |
| Length (mm): | 50 |
| Width (mm) | 15.5 |
| Height (mm) | 3 |
| Weight (gm) | 3 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 8 × 2 × 1 cm |
3S 10A Li-ion 18650 Charger Protection Board Module 10.8V Overview
The 3S 10A Li-ion 18650 Charger Protection Board Module is a safeguard and charging control board for 3-cell (10.8V nominal) lithium-ion battery packs. It monitors cell voltages, limits charging to 12.6–13V, and prevents overcharge, over-discharge and overcurrent conditions, making it perfect for reliable pack management.
Key Features of 3S 10A Li-ion 18650 Charger Protection Board Module 10.8V
- Precision overcharge cutoff at 4.25–4.35V ±0.05V per cell and charging voltage 12.6–13V
- Over-discharge protection between 2.3–3.0V ±0.05V per cell to prevent cell damage
- Up to 6A continuous discharge and 10A peak charge current for moderate-power applications
- Cell balancing current up to 100mA to maintain pack consistency and extend battery life
- Auto recovery function automatically resets after fault conditions clear
- Low on-resistance design with 10 MOSFETs for efficient power handling and reduced heat
- Fast shipping from Zbotic for swift project deployment
Applications and Use Cases
- Cordless electric drills and screwdrivers
- Portable agricultural sprayers powered by Li-ion packs
- LED light arrays and emergency lighting systems
- Low-power inverters for camping and outdoor use
- DIY battery pack builds using 18650, 26650 or polymer cells
How to Use 3S 10A Li-ion 18650 Charger Protection Board Module 10.8V
Mount the module on a non-conductive surface, then connect the three Li-ion cells in series to B- (negative) and B+ (positive) terminals, ensuring correct polarity. Attach the pack output to P+ and P–, then connect your charger to the same P+ and P– points. The board will automatically manage charging, balancing and protection once power is applied.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Which battery cells are compatible with this 3S protection board?
This board works with 3.6V or 3.7V nominal lithium-ion cells, including 18650, 26650 and polymer types, wired in a 3-series configuration.
What is the maximum continuous discharge current?
The module supports up to 6A continuous discharge, making it suitable for moderate power draws in tools or lighting applications.
How does the auto recovery function operate?
If an overcharge, over-discharge or overcurrent event occurs, the board cuts off the output. Once cell voltages return to safe levels, it automatically restores normal operation without manual reset.
LiPo Charger Not Charging: Diagnosis & Fix Step by Step
Few things are more frustrating for an FPV pilot or RC hobbyist than a LiPo charger not charging...
Read More →
24V Power Supply: Industrial and Motor Applications
Table of ContentsWhy 24V for Industrial Applications 24V SMPS and Adapters Battery Solutions for 24V Powering Stepper Motors...
Read More →
Capacitor ESR Tester: Measure Equivalent Series Resistance
The capacitor ESR tester measures the Equivalent Series Resistance of electrolytic capacitors -- the hidden parameter that determines...
Read More →Technical Specifications
| Voltage Range | 10.8V - 12.6V |
|---|---|
| Current Rating | 10A |
| Cell Configuration | 3S |
| SKU | AI3443 |
| Weight | 0.0 kg |
| Availability | In Stock |
Applications & Use Cases
The 3S 10A Li-ion 18650 Charger Protection Board Module 10.8V 11.1V 12.6V is a versatile battery protection board used across a wide range of applications including lithium battery pack protection, power bank builds, e-bike battery management, solar energy storage, and UPS systems.
Common use cases:
- Building a custom lithium battery pack
- Adding overcharge/overdischarge protection
- Creating a DIY power bank
This product is ideal for battery pack builders and power electronics engineers.
Technical Tip: BMS boards prevent overcharge, overdischarge, overcurrent, and short circuit. Match cell count (S) and max current rating to your battery pack.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
