This is the 3mm variant of the 2 x 26650 Battery Holder with 26.3MM Bore Diameter in Battery Holders, Battery Pack Accessories & Holders. Available at ₹6.02 (₹5.10 + GST) with free shipping across India.
Looking for 26.3mm Battery? 2 x 26650 Battery Holder with 26.3MM Bore Diameter is available at Zbotic with fast shipping across India.
PRODUCT DESCRIPTION
26650 x 2 Battery Cell Spacer/Holder is a cylindrical battery spacer, made of flame retardant ABS PC materials, with high-temperature resistance and crack resistance. There are slots on the edge of the holder, that can be combined into many different sizes and shapes of the battery pack; after welding nickel tabs, the pack can pass the vibration test without any other connecting device. Make your battery pack Solid and Reliable This Battery Holder is compatible with our 21700 Li-ION Batteries which you need to buy separately.
Note!! Every Single battery cell needs 2 Spacer for one up and one down buy it accordingly.
Features :
- There are slots on the edge of the holder to combine them into many different sizes and shapes of the battery pack.
- Application: Design for Radiating Complex Battery Packs. Safe and Stable, Perfect Build for eBike!
Advantages:
- Very simple to operation
- Very flexible, it is easy to assemble any type of battery packs
- Radiating during high rate discharge.
- Makes your battery pack Solid and Reliable!
Package Includes:
1 x 2 x 26650 Battery Holder with 26.3MM Bore Diameter
2 x 26650 Battery Holder with 26.3MM Bore Diameter Overview
The 2 x 26650 Battery Holder with 26.3MM Bore Diameter is a dual-cell spacer designed to secure and insulate two 26650 lithium-ion cells. Constructed from flame-retardant ABS/PC material, it ensures stable alignment and effective heat resistance for custom battery pack assemblies.
Key Features of 2 x 26650 Battery Holder with 26.3MM Bore Diameter
- Flame-retardant ABS/PC construction for high-temperature and crack resistance
- Precise 26.3 mm bore diameter compatible with standard 26650 cells
- Edge slots allow modular combination into various pack shapes and sizes
- Vibration-tested reliability once nickel tabs are welded in place
- Requires two spacers per cell (one top, one bottom) for secure fitting
- Genuine product with fast shipping from Zbotic across India
Applications and Use Cases
- Building ebike battery packs with robust cell spacing and insulation
- DIY portable power bank assemblies using multiple 26650 cells
- Solar energy storage modules requiring vibration-resistant cell holders
- Custom robotics projects where precise battery alignment is critical
- Emergency backup power systems with standardized cell spacing
How to Use 2 x 26650 Battery Holder with 26.3MM Bore Diameter
Place one spacer at the top and one at the bottom of each 26650 cell, ensuring the bore aligns snugly around the cell. Use the edge slots to link multiple holders into your desired pack configuration, then weld nickel tabs across cell terminals. The assembled pack will maintain consistent cell spacing and withstand vibration tests without additional fasteners.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
How many spacers do I need per cell?
Each 26650 cell requires two spacers—one on the positive end and one on the negative end—to ensure secure positioning and insulation.
Can I combine multiple holders into a larger pack?
Yes. The edge slots on the holders allow you to interlock units side by side or end to end, creating custom-sized battery modules.
Is this holder compatible with other cell sizes?
No. The bore diameter is specifically 26.3 mm, optimized for 26650 cells only and is not recommended for smaller or larger cell formats.
Battery Fuel Gauge: Monitor Remaining Capacity with Arduino
Table of ContentsVoltage Alone Is Unreliable Coulomb Counting Explained INA219 Current and Voltage Sensor Arduino Fuel Gauge Circuit...
Read More →
Power MOSFET Switch: High-Current Battery Disconnect
Table of ContentsWhy MOSFETs for Battery Switching MOSFET Selection Criteria High-Side vs Low-Side Switching Gate Driver Circuits Building...
Read More →
Piezoelectric Energy: Generate Power from Movement
Table of ContentsPiezoelectric Effect Explained Piezo Element Types Harvesting Circuit Design Rectification and Storage Practical Power Output Applications...
Read More →Technical Specifications
| Size | 26.3mm |
|---|---|
| Package Quantity | 26650 pcs |
| SKU | AI3237 |
| Weight | 0.00455 kg |
| Availability | In Stock |
Applications & Use Cases
The 2 x 26650 Battery Holder with 26.3MM Bore Diameter is a versatile battery holders used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
