This is the 5V variant of the Momentary Tactile Push Button Module DC 5V Switch in Electronic Switches/Keypads Modules. Available at ₹30.44 (₹25.80 + GST) with free shipping across India.
Looking for 5v Module 444091? Momentary Tactile Push Button Module DC 5V Switch is available at Zbotic with fast shipping across India.
Momentary Tactile Push Button Module DC 5V Switch
The Momentary Tactile Push Button Module DC 5V/12V Switch is an ideal solution for integrating a button into your projects, providing a high signal output when pressed.
This push button module comes fully equipped, eliminating the need for additional pull-up or pull-down resistors as they are already integrated into the circuit. The button, along with the resistor, is conveniently mounted on the board, with pre-drilled holes for easy installation. The built-in resistor has a value of 10 kΩ.
Featuring two contacts, this module operates by closing the contacts when the button is pressed and opening them when released. The board also includes three output terminals: I, S, and 5V. The I contact is connected to the common wire of the circuit, S serves as the output of the module, and the 5V terminal is connected to the power supply.
Specification:
| Parameter | Specification |
|---|---|
| Input Voltage | DC 5V |
| Operating Mode | Momentary |
| Contact Rating | 50 mA |
| Resistance | 10 kΩ |
| Number of Contacts | 2 |
| Output Terminals | I, S, 5V |
| Mounting Holes | Yes (Pre-drilled) |
| Dimensions | Variable |
| Material | PCB |
| Weight | Variable |
| Operating Temperature | -20°C to +70°C |
| Application | Projects, DIY |
Package Includes:
1 x Momentary Tactile Push Button Module DC 5V 12V Switch
Momentary Tactile Push Button Module DC 5V Switch Overview
The Momentary Tactile Push Button Module DC 5V Switch is a compact input device designed for electronic projects requiring a reliable on-demand push action. It delivers a clean high-signal output at 5V when pressed and opens the circuit when released, making it ideal for microcontroller and digital logic interfacing.
Key Features of Momentary Tactile Push Button Module DC 5V Switch
- Operating Voltage: 5V DC, suitable for Arduino, Raspberry Pi and other 5V logic systems
- Built-in 10 kΩ pull-up resistor—no extra resistor needed for stable signal
- Low Contact Resistance: 50 mΩ max (initial) for minimal voltage drop
- Durable Construction: Rated for 100,000 cycles of reliable operation
- Wide Temperature Range: –25 °C to +105 °C for harsh-environment use; solder seal up to 250–280 °C
- Pre-drilled Mounting Holes and 3-pin I/O header for easy panel or PCB installation
- Fast Shipping from Zbotic—get genuine parts delivered across India quickly
Applications and Use Cases
- Push-button input for Arduino and microcontroller digital pins
- Manual reset or interrupt trigger in embedded circuits
- User control interface for robotics and automation panels
- Prototype breadboard setups requiring momentary contact switching
- DIY control boxes, alarm systems or access-control keypads
How to Use Momentary Tactile Push Button Module DC 5V Switch
Connect the module’s three pins—VCC to 5 V supply, GND to ground and SIG (signal) to your microcontroller’s digital input. The internal pull-up resistor holds SIG high until the button is pressed, at which point the contacts close and SIG outputs a stable high pulse. Mount the module using the pre-drilled holes for secure installation.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What are the pin labels and functions on this module?
The module has three pins: VCC (5 V supply), GND (ground) and SIG (signal output). SIG goes high when the button is pressed.
Do I need an external resistor with this switch module?
No external resistor is required. A 10 kΩ pull-up resistor is already integrated on the board for immediate use.
How long will the momentary switch last in typical use?
This module is rated for 100,000 mechanical cycles under normal operating conditions, ensuring long-term reliability.
Technical Specifications
| Operating Voltage | 5V |
|---|---|
| SKU | AI2539 |
| Weight | 0.00325 kg |
| Availability | In Stock |
Applications & Use Cases
The Momentary Tactile Push Button Module DC 5V Switch is a versatile electronic switches/keypads modules used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
