Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with AF2569 Camera Module

This is the Blue variant of the Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with AF2569 Camera Module in Ai Thinker ESP Modules. Available at ₹949.90 (₹805.00 + GST) with free shipping across India.

Looking for Esp32 Development Board 326597? Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with AF2569 Camera Module is available at Zbotic with fast shipping across India.

Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with AF2569 Camera Module

Esp32 Development Board 326597 – Description:

As you may be aware, ESP32 boards are more popular than you might think, and AI THINKER is one of the leading manufacturers of development boards, has introduced a line of ESP32 boards. The most distinctive feature is that Ai Thinker is the only brand that produces official ESp32 boards.

One of the brands that make IoT modules and antennas is Ai Thinker. Because of the Bluetooth and wifi features, this board is gaining popularity due to its programmable and CAM properties, which allow it to be programmed and used in a compact manner.

Note: Product image may vary from the actual product.

Pin Configuration:

ESP32-CAM is packaged in DIP and can be directly plugged into the backplane for quick production. It provides customers with a highly reliable connection method and is convenient for use in various IoT hardware terminals.

Zbotic is the official distributor of Ai-Thinker in India

Connection Diagram:

Useful Links:

1. To use this module, you need to copy-paste the link given following in the Preference section of File Menu. Stable Link :  https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json . After that, click on OK.
2. Go to Tools->Boards->Boards Manager. Search ESP32. Install it.
3. Now, go to Tools. You will see “ESP32 Arduino”. Search “AI Thinker ESP32-CAM” , select it.
4. Go to  File->Examples->Examples for AI Thinker ESP32->ESP32->Camera->CameraWebServer.
5. Open that file and in that file, uncomment the line: #define CAMERA_MODEL_AI_THINKER .
6. Go to Tools. Do not change any configuration settings. Select correct COM port.
7. Finally, Compile and Upload the code. While uploading, as soon as you see the “Connecting…”, press Reset Button on module and release it. Then you will see code uploading progress.
8. Once it is uploaded completely, go to Serial monitor, Remove  GPIO0-GND jumper cable, again press Reset Button and then you can see the output.
9. Copy the IP address to a browser,  you will see a new window with functions for camera. Click on “Start Streaming” and then camera will be turned ON.

Features:

1. Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
2. Low-power dual-core 32-bit CPU for application processors
3. Up to 240MHz, up to 600 DMIPS
4. Built-in 520 KB SRAM, external 4M PSRAM
5. Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC
6. Support OV2640 and OV7670 cameras with built-in flash
7. Support for images WiFI upload
8. Support TF card
9. Support multiple sleep modes
10. Embedded Lwip and FreeRTOS
11. Support STA/AP/STA+AP working mode
12. Support Smart Config/AirKiss One-click distribution network
13. Support for serial local upgrade and remote firmware upgrade (FOTA)

Specifications:

• Module Model: ESP32-CAM
• Custom IO Port: 9
• SPI Flash:Default 32Mbit
• RAM:520KB SRAM +4M PSRAM
• WIFI: 802.11 b/g/n/e/i
• Bluetooth Version:4.2
• Antenna Type:IPEX and PCB
• Input Supply Range (VDC):3.6 ~ 5
• Current Dissipation (mA):180-310

Tutorial:

https://randomnerdtutorials.com/esp32-cam-video-streaming-face-recognition-arduino-ide/

Package Includes:

1 x Ai-Thinker ESP32 CAM Development Board WiFi+Bluetooth with AF2569 Camera Module

Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with Overview

The Ai Thinker ESP32 CAM Development Board combines an ESP32 dual-core Wi-Fi and Bluetooth SoC with an AF2569 camera module and onboard flash. This ultra-small board is ideal for capturing images and streaming video over Wi-Fi or Bluetooth in embedded vision and IoT projects.

Key Features of Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with

• ESP32 dual-core 32-bit CPU running up to 240 MHz (up to 600 DMIPS)
• Built-in AF2569 camera module with onboard flash LED for low-light shooting
• 520 KB internal SRAM plus 4 MB external PSRAM for image buffering
• 802.11b/g/n Wi-Fi and Bluetooth/BLE connectivity from a single SoC
• Interfaces: UART, SPI, I2C, PWM, ADC and DAC for sensor and actuator control
• Compact form factor compatible with breadboards and custom PCBs
• Genuine product and fast shipping across India from Zbotic

Applications and Use Cases

• Wireless home surveillance camera with real-time video streaming
• Remote baby monitor or pet camera with motion detection
• Smart doorbell prototype with image capture and notification
• IoT robot vision for object tracking and line following
• Outdoor time-lapse photography with Wi-Fi upload
• Facial recognition access control and attendance systems

How to Use Ai Thinker ESP32 CAM Development Board WiFi+Bluetooth with

To get started, connect the board’s 5 V micro-USB power input or a 3.3 V regulated supply and attach the AF2569 camera ribbon cable. Use a USB-to-TTL serial adapter on UART pins to enter programming mode: pull the IO0 pin low while resetting. In the Arduino IDE or ESP-IDF, select the ESP32 board, upload your sketch with Wi-Fi SSID/password, and open the serial monitor to view the camera’s IP address for video streaming.

Why Buy from Zbotic?

• Genuine Products: All items sourced from authorized distributors
• Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
• Free Shipping: Free delivery on qualifying orders
• COD Available: Cash on Delivery, UPI, cards, net banking
• Technical Support: Expert help for setup and troubleshooting
• Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

Which camera sensor does this board use?

This module ships with the AF2569 camera, offering hardware JPEG encoding and an onboard flash LED for low-light environments.

How do I power the ESP32 CAM board?

You can power it via the micro-USB port at 5 V or supply 3.3 V directly to the 3V3 pin. Ensure your power source can deliver at least 500 mA to accommodate Wi-Fi transmissions and the camera module.

What software environment is required?

The board is compatible with both the Arduino IDE (with the ESP32 add-on) and Espressif’s ESP-IDF. Use a serial adapter to connect TX/RX for programming, then upload over the USB-to-TTL interface.