Teensy 3.6 Development Board

Looking for Teensy 3.6 Development Board? Teensy 3.6 Development Board is available at Zbotic with fast shipping across India.

Description:

The Teensy is a breadboard-friendly development board with loads of features in a teensy package. Each Teensy 3.6 comes pre-flashed with a bootloader so you can program it using the onboard USB connection, so no need of an external programmer. You can program for the Teensy in your favorite program editor using C or you can install the Teensyduino add-on for the Arduino IDE and write Arduino sketches for it.

The processor on the Teensy also has access to the USB and can emulate any kind of USB device you need it to be, making it great for USB-MIDI and other HID projects. The 32-bit, 180MHz processor brings a few other features to the table as well, such as multiple channels of Direct Memory Access, several high-resolution ADCs, and even an I2S digital audio interface. There are also four separate interval timers plus a delay timer. All digital pins have interrupt capability and are 3.3V tolerant.

All of this functionality is jammed into a 62.3mm x 18.0mm board with all solder points on a 0.1″ grid so you can slap it on a breadboard and get to work. The Teensy 3.6 (as well as its sibling, the Teensy 3.5) is larger, faster and capable of more complex projects, especially with its onboard micro SD card port. An upgraded ARM Cortex MCU (180MHz from 72MHz), more memory (1M from 256K), as well as more RAM, EEPROM and accessible pins make up the key new features of this “teensy” board. The Teensy 3.6 is slightly scaled up from the Teensy 3.5 but is offered at a higher price point, comparatively.

Pinout:

1. 180 MHz ARM Cortex-M4 with Floating Point Unit
2. 1M Flash, 256K RAM, 4K EEPROM
3. Microcontroller Chip MK66FX1M0VMD18
4. USB High Speed (480Mbit/sec) Port
5. 2 CAN Bus Ports
6. 32 General Purpose DMA Channels
7. 22 PWM Outputs
8. 4 I2C Ports
9. 11 Touch-Sensing Inputs
10. 62 I/O Pins (42 breadboards friendly)
11. 25 Analog Inputs to 2 ADC with 13-bit resolution
12. 2 Analog Outputs (DAC) with 12-bit resolution
13. USB Full Speed (12Mbit/sec) Port
14. Ethernet mac, capable of full 100Mbit/sec speed
15. Native (4-bit SDIO) micro SD card port
16. I2S Audio Port, 4-Channel Digital Audio Input & Output
17. 14 Hardware Timers
18. Cryptographic Acceleration Unit
19. Random Number Generator
20. CRC Computation Unit
21. 6 Serial Ports (2 with FIFO and Fast Baud Rates)
22. 3 SPI Ports (1 with FIFO)
23. Real-Time Clock
24. 62.3mm x 18.0mm x 4.2mm (2.5in x 0.7in x 0.2in)

Package Includes:

1 x Teensy 3.6 Development Board

1 x Pinout Drawing Card

Teensy 3.6 Development Board Overview

The Teensy 3.6 Development Board is a compact, breadboard-friendly microcontroller platform powered by a 180 MHz ARM Cortex-M4 with Floating Point Unit. Ideal for high-speed data processing and USB device emulation, it’s used in applications ranging from MIDI controllers to real-time sensor fusion.

Key Features of Teensy 3.6 Development Board

• 180 MHz ARM Cortex-M4 processor with FPU for intensive computations
• 1 MB flash memory, 256 KB RAM and 4 KB EEPROM for program and data storage
• USB High Speed port (480 Mbit/sec) with onboard bootloader—no external programmer required
• Two independent CAN bus ports for automotive or industrial networking
• 62 I/O pins (42 breadboard-friendly), 22 PWM outputs and 32 DMA channels for complex I/O handling
• Four I²C ports and 11 capacitive touch inputs for sensor and user-interface integration
• Genuine Teensy 3.6 boards with fast shipping from Zbotic across India

Applications and Use Cases

• USB-MIDI controllers and custom MIDI interfaces
• HID devices such as keyboards, gamepads or custom input panels
• CAN-bus data loggers for automotive diagnostics or telemetry
• High-speed sensor data acquisition with DMA acceleration
• Robotics control systems requiring precise PWM and fast interrupt handling
• Capacitive touch user interfaces for home automation and industrial panels

How to Use Teensy 3.6 Development Board

Simply connect the Teensy 3.6 to your computer via the micro-USB port; it comes pre-flashed with a bootloader so you can immediately upload code. Install the Teensyduino add-on for the Arduino IDE or use your preferred C/C++ toolchain, write your sketch or program, then press the onboard reset button to compile and flash over USB. Wire sensors and actuators to the breadboard-compatible pins and begin debugging in real time.

Why Buy from Zbotic?

• Genuine Products: All items sourced from authorized distributors
• Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
• Free Shipping: Free delivery on qualifying orders
• COD Available: Cash on Delivery, UPI, cards, net banking
• Technical Support: Expert help for setup and troubleshooting
• Easy Returns: Hassle-free replacement for defective products

Frequently Asked Questions

Which development environments are supported?

You can program the Teensy 3.6 using standard C/C++ compilers or install the Teensyduino add-on for the Arduino IDE to write and upload sketches directly.

How do I connect external CAN transceivers?

The Teensy 3.6 provides two built-in CAN ports; simply wire each CANH and CANL pin to an external CAN transceiver module, then integrate into your vehicle or industrial network.

Can the board emulate USB devices?

Yes. The onboard USB controller can emulate any USB device class (MIDI, keyboard, mouse, serial, etc.) without additional hardware, making it ideal for custom HID and MIDI projects.