This is the Blue variant of the Espressif ESP32-WROVER 8M 64Mbit Flash WiFi Bluetooth Module in Other ESP WIFI Modules. Available at ₹332.00 (₹281.36 + GST) with free shipping across India.
Looking for Esp32 Module 8m Espressif Esp32-wrover? Espressif ESP32-WROVER 8M 64Mbit Flash WiFi Bluetooth Module is available at Zbotic with fast shipping across India.
Looking for Esp32 Module 8m Espressif Ai1333? Espressif ESP32-WROVER 8M 64Mbit Flash WiFi Bluetooth Module is available at Zbotic with fast shipping across India.
Espressif ESP32-WROVER Wireless Module is a powerful, generic WiFi-BT-BLE MCU module that targets a wide variety of applications. These applications range from low-power sensor networks to the most demanding tasks, such as voice encoding, music streaming, and MP3 decoding. ESP32-WROVER features an 8MB external SPI flash and an additional 64MB SPI Pseudo static RAM (PSRAM).
The ESP32-WROVER MCU Modules use the ESP32-D0WD chip at its core. This SoC features two CPU cores that can be individually controlled, and the CPU clock frequency is adjustable from 80MHz to 240MHz. The ESP32 integrates a rich set of peripherals, ranging from capacitive touch sensors, Hall sensors, SD card interface, Ethernet, high-speed SPI, UART, I2S, and I2C.
ESP-32S Wifi Bluetooth combo module provides SDK Firmware for fast on-line programming and open source toolchains based on GCC for development support. It is designed for Generic low power IoT sensor hub, loggers, video streaming for the camera, Wi-Fi & Bluetooth enabled devices, Home automation, and mesh network applications, aimed at makers, hardware engineers, software engineers and solution provides.
ESP32 is a single chip 2.4 GHz Wi-Fi and Bluetooth combo chip designed with TSMC ultra-low-power 40 nm technology. It is designed and optimized for the best power performance, RF performance, robustness, versatility, features, and reliability, for a wide variety of applications, and different power profiles.
ESP32 is the most integrated solution for Wi-Fi + Bluetooth applications in the industry with less than 10 external components. ESP32 integrates the antenna switch, RF balun, power amplifier, low noise receive amplifier, filters, and power management modules. As such, the entire solution occupies a minimal Printed Circuit Board (PCB) area.
ESP32 is designed for mobile, wearable electronics, and the Internet of Things (IoT) applications. It has many features of state-of-the-art low power chips, including fine resolution clock gating, power modes, and dynamic power scaling.
Features:
- ESP32 embedded, two or one Xtensa 32-bit LX6 microprocessor(s) with adjustable clock frequency, ranging from 80 MHz to 240 MHz
- +19.5 dBm output power ensures a good physical range
- Classic Bluetooth for legacy connections, also supporting L2CAP, SDP, GAP, SMP, AVDTP, AVCTP, A2DP (SNK), and AVRCP (CT)
- Support for Bluetooth Low Energy (Bluetooth LE) profiles including L2CAP, GAP, GATT, SMP, and GATT-based profiles like BluFi, SPP-like, etc
- Bluetooth Low Energy (Bluetooth LE) connects to smartphones, broadcasting low-energy beacons for easy detection
- Sleep current is less than 5 μA, making it suitable for battery-powered and wearable electronics applications
- Peripherals include capacitive touch sensors, Hall sensor, SD card interface, Ethernet, high-speed SPI, UART, I2S and I2C
- Fully certified with integrated antenna and software stacks
Specifications:
- Wifi: 802.11 b/g/n (802.11n up to 150 Mbps)
- Frequency range 2.4 GHz ~ 2.5 GHz
- Bluetooth: v4.2 BR/EDR and BLE
- Radio: NZIF receiver with –97 dBm sensitivity, Class-1, class-2, and class-3 transmitter, AFH
- Audio: CVSD and SBC
- On-chip sensor: Hall sensor
- Integrated crystal: 40 MHz crystal
- Integrated SPI flash: 8 MB
- Integrated PSRAM: 64 MB
- Operating voltage/Power supply: 3.0 V ~ 3.6 V
- Minimum current: 500 mA
- Operating temperature range: –40 °C ~ 85 °C
- Dimensions: 18 x 31.5 x 3.3 mm
- Moisture sensitivity level (MSL): Level 3
Package Includes:
1 x Espressif ESP32-WROVER 8M 64Mbit Flash WiFi Bluetooth Module
This Esp32 Module 8m Espressif Ai1333 is a popular choice among hobbyists and professionals. The Esp32 Module 8m Espressif Ai1333 offers reliable performance for your projects.
About Esp32 Module 8m Espressif Ai1333
Espressif ESP32-WROVER 8M 64Mbit Flash WiFi Bluetooth Module is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Espressif, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Espressif
- SKU: AI1333
- Category: Other ESP WIFI Modules
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about Esp32 Module 8m Espressif Ai1333 and other products.
Applications
Esp32 Module 8m Espressif Ai1333 can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your Esp32 Module 8m Espressif Ai1333 today and start building.
This Esp32 Module 8m Espressif Esp32-wrover is a popular choice among hobbyists and professionals. The Esp32 Module 8m Espressif Esp32-wrover offers reliable performance for your projects.
Espressif ESP32-WROVER 8M 64Mbit Flash WiFi Bluetooth Module Overview
The Espressif ESP32-WROVER 8M 64Mbit Flash WiFi Bluetooth Module is a compact, ready-to-use wireless MCU module integrating dual-core WiFi 802.11b/g/n and Bluetooth v4.2 BR/EDR & BLE. Designed for performance-critical IoT and embedded applications, it features 8 MB of SPI flash and 64 MB of SPI PSRAM for demanding tasks like audio streaming and real-time data processing.
Key Features of Espressif ESP32-WROVER 8M 64Mbit Flash WiFi Bluetooth Module
- Dual-core ESP32-D0WD MCU supporting up to 240 MHz clock speed
- Integrated 8 MB SPI flash and 64 MB SPI PSRAM for large data buffering
- 802.11 b/g/n WiFi (up to 150 Mbps) and Bluetooth v4.2 BR/EDR + BLE
- On-chip hall sensor for magnetic field detection
- High-sensitivity RF: NZIF receiver (–97 dBm) and Class-1/2/3 transmitters
- Genuine Espressif module with authenticity guarantee and fast shipping from Zbotic
Applications and Use Cases
- Low-power wireless sensor networks for home or industrial monitoring
- Voice encoding/decoding and streaming via onboard CVSD and SBC audio codecs
- Portable MP3 players or internet radio with PSRAM for audio buffers
- Smart home controllers integrating WiFi and Bluetooth connectivity
- Edge computing nodes requiring extra RAM for image or data processing
- Prototyping wearable devices with real-time data logging
How to Use Espressif ESP32-WROVER 8M 64Mbit Flash WiFi Bluetooth Module
Mount the ESP32-WROVER onto your development board or custom PCB, ensuring a stable 3.3 V power supply capable of 500 mA peak. Connect UART0 pins to a USB-TTL adapter for flashing and serial debugging. Use Espressif’s ESP-IDF or Arduino IDE, enabling PSRAM support in menuconfig for high-memory applications. Incorporate the onboard antenna clearance area to maintain RF performance.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Does the ESP32-WROVER include an onboard antenna?
Yes. The module features an integrated PCB antenna for reliable 2.4 GHz RF performance along with a ground clearance specification for optimal signal strength.
How do I enable the 64 MB PSRAM in my project?
In ESP-IDF, open menuconfig > Component config > ESP32-specific > Support for external, SPI-connected RAM, then select “Enable SPIRAM” and choose the WROVER PSRAM size. In Arduino IDE, ensure you select a WROVER board variant.
What power supply is required for stable operation?
The module operates at 3.3 V DC. Use a regulator capable of delivering at least 500 mA to handle WiFi/Bluetooth peak currents and avoid brownouts.
Technical Specifications
| Brand | Espressif |
|---|---|
| Model | ESP32-WROVER |
| Interface / Protocol | WiFi, Bluetooth |
| Color | Blue |
| SKU | AI1333 |
| Weight | 0.015 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Espressif ESP32-WROVER 8M 64Mbit Flash WiFi Bluetooth Module is a versatile other esp wifi modules used across a wide range of applications including WiFi connectivity for microcontrollers, IoT sensor nodes, remote monitoring, OTA firmware updates, and cloud-connected devices.
Common use cases:
- Adding WiFi to an existing Arduino project
- Building a cloud-connected weather station
- Enabling remote firmware updates
This product is ideal for IoT developers and electronics hobbyists.
Technical Tip: ESP-WROOM-32 modules need proper decoupling capacitors and antenna clearance for reliable WiFi performance.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Espressif product sourced from authorized channels
Tushar Grewal (verified owner) –
Average Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. WiFi drops occasionally but works for basic projects.
Kritika Nayak –
Great quality Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. Flashed with ESPHome and it works beautifully.
Vishal Mehta (verified owner) –
Outstanding Espressif ESP32-WROVER 8M 64Mbit Flash WiFi! Programmed it with Arduino IDE. All features work as documented.
Sarika Goyal –
Average Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. WiFi drops occasionally but works for basic projects.
Anirudh Jain (verified owner) –
Perfect for my IoT project. This Espressif ESP32-WROVER 8M 64Mbit Flash WiFi has excellent WiFi performance.
Rahul Chopra (verified owner) –
This Espressif ESP32-WROVER 8M 64Mbit Flash WiFi is amazing for home automation. Connected all my smart devices easily.
Akshat Dhawan (verified owner) –
Good quality Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. Flash memory is sufficient for most projects.
Manish Choudhury (verified owner) –
Love this Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. Built a smart switch with it. Works with Home Assistant perfectly.
Pranav Parekh (verified owner) –
Superb Espressif ESP32-WROVER 8M 64Mbit Flash WiFi! Using it for my weather monitoring station. WiFi range is impressive.
Jai Iyer (verified owner) –
Nice Espressif ESP32-WROVER 8M 64Mbit Flash WiFi for IoT prototyping. Breadboard compatible which is a plus.
Dhruv Kulkarni (verified owner) –
Decent Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. Had to install CP2102 drivers but works fine after that.
Zara Srivastava (verified owner) –
Good Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. WiFi works well. Sometimes needs a reset but overall solid.
Daksh Choudhury (verified owner) –
Great Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. OTA updates work perfectly. Using 5 of these around my house.
Devansh Bose (verified owner) –
Superb Espressif ESP32-WROVER 8M 64Mbit Flash WiFi! Using it for my weather monitoring station. WiFi range is impressive.
Tushar Dhillon (verified owner) –
Decent Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. Had to install CP2102 drivers but works fine after that.
Ayush Yadav (verified owner) –
Excellent for smart home projects. This Espressif ESP32-WROVER 8M 64Mbit Flash WiFi connects reliably to my router.
Nandini Kohli (verified owner) –
Superb Espressif ESP32-WROVER 8M 64Mbit Flash WiFi! Using it for my weather monitoring station. WiFi range is impressive.
Vaishali Iyer –
Superb Espressif ESP32-WROVER 8M 64Mbit Flash WiFi! Using it for my weather monitoring station. WiFi range is impressive.
Anand Negi (verified owner) –
Love this Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. Built a smart switch with it. Works with Home Assistant perfectly.
Nikita Shah (verified owner) –
Outstanding Espressif ESP32-WROVER 8M 64Mbit Flash WiFi! Programmed it with Arduino IDE. All features work as documented.
Hardik Ghosh (verified owner) –
This Espressif ESP32-WROVER 8M 64Mbit Flash WiFi is a beast for the price. Running a web server on it with no issues.
Sneha Deshpande (verified owner) –
Average Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. WiFi drops occasionally but works for basic projects.
Lakshmi Chauhan –
Nice Espressif ESP32-WROVER 8M 64Mbit Flash WiFi for IoT prototyping. Breadboard compatible which is a plus.
Naman Saini (verified owner) –
Good Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. WiFi works well. Sometimes needs a reset but overall solid.
Darshan Mittal (verified owner) –
Great Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. OTA updates work perfectly. Using 5 of these around my house.
Vijay Solanki –
Love this Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. Built a smart switch with it. Works with Home Assistant perfectly.
Abhishek Grewal –
Great quality Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. Flashed with ESPHome and it works beautifully.
Abhishek Solanki –
This Espressif ESP32-WROVER 8M 64Mbit Flash WiFi is amazing for home automation. Connected all my smart devices easily.
Zara Trivedi (verified owner) –
Excellent for smart home projects. This Espressif ESP32-WROVER 8M 64Mbit Flash WiFi connects reliably to my router.
Mukesh Garg (verified owner) –
Great Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. OTA updates work perfectly. Using 5 of these around my house.
Jatin Bajaj (verified owner) –
Good quality Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. Flash memory is sufficient for most projects.
Shivam Modi (verified owner) –
Superb Espressif ESP32-WROVER 8M 64Mbit Flash WiFi! Using it for my weather monitoring station. WiFi range is impressive.
Vivek Trivedi (verified owner) –
Great Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. OTA updates work perfectly. Using 5 of these around my house.
Nitin Tandon (verified owner) –
Excellent for smart home projects. This Espressif ESP32-WROVER 8M 64Mbit Flash WiFi connects reliably to my router.
Neeraj Pandey (verified owner) –
This Espressif ESP32-WROVER 8M 64Mbit Flash WiFi is a beast for the price. Running a web server on it with no issues.
Kiara Mukherjee (verified owner) –
This Espressif ESP32-WROVER 8M 64Mbit Flash WiFi is amazing for home automation. Connected all my smart devices easily.
Abhishek Rao (verified owner) –
Great Espressif ESP32-WROVER 8M 64Mbit Flash WiFi. OTA updates work perfectly. Using 5 of these around my house.
Rakesh Dave (verified owner) –
Outstanding Espressif ESP32-WROVER 8M 64Mbit Flash WiFi! Programmed it with Arduino IDE. All features work as documented.