Description:
Nokia 5110 LCD Display Module
This product’s name reveals its origin. It is an LCD module that was used in old Nokia 5110/3310 cell phones. Now, hobbyists use it for various applications involving graphics and text.
This LCD module is very user-friendly, even though it was designed for industrial purposes. It is a basic graphic LCD screen that was originally meant for cell phones.
This LCD module is mounted on a PCB that is easy to solder. It uses a Philips PCD8544 LCD driver, which is a mobile phone LCD driver.
This LCD module is a low-cost monochrome LCD module with 84 X 48 pixels. It can display rich graphics and text content. This module can accept 3-5V input, so there is no need for an extra level shifter.
Interfacing with UNO Board:
This text describes the PCD8544 controller, which is also used in the Nokia 3310 LCD. The PCD8544 is a low-power CMOS LCD controller/driver that can drive a graphic display with 48 rows and 84 columns. It has all the functions needed for the display in one chip, such as generating LCD supply and bias voltages. This reduces the number of external components and the power consumption. The PCD8544 connects to microcontrollers through a serial bus interface.
Pin Configuration :
- RST– reset
- CE– chip selection
- DC– data/commands choice
- DIN– serial data line
- CLK– serial Clock Speed.
- VCC– 3.3V
- LIGHT– backlight control terminal
- GND– power negative
Operation of Nokia 5110 LCD Display Module at 3.3V
Many devices that can be used with an Arduino, require a power supply of 3.3V. This is also the case with the Nokia 5110. The best way to deal with 3.3V devices is to take an Arduino Pro, which can run on 3.3V.
Thanks to the internal clamp of the PCD8544 we can use a very simple level shifter. Four current limiting resistors of 10kΩ can do the job. When an LCD control line is high, the current through the 10kΩ resistor is just 40uA, so this is harmless. Note that we can’t read back from the LCD with this circuit.
Operation of Nokia 5110 LCD Display Module at 5V
Because VDD max = 7V, the PCD8544 controller can handle 5V, but the Nokia 5110 LCD works best at 3.3V. The four resistors of 10kΩ avoid streaks on the LCD display. (at 5V the screen becomes somewhat black when tested)
Features:
- 84 X 48 dot matrix LCD, can show 4 lines of characters.
- Use serial interface communicate with the master processor, the number of interface signal lines reduced greatly, only 8 signal lines including power and GND.
- Support different types of MCU, such as the Arduino, AVR, SPI, MCS51, and so on.
- Transfer rate up to 4Mbps, can full speed write display data without waiting time.
- Can use the conductive glue to connect the module to the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy to install and replace.
- LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small.
- Low power supply, the working current in a normal situation is lower than 200µA and has the power-down mode.
- “LIGHT” linked with GND, the backlight to be lit.
- Need you to compress the screen and PCB tighter, might be got loose after the delivery.
- Use a 3.3V controller, otherwise, the display could be quite vague.
Specification
| Driver IC | PCD8544 |
|---|---|
| Backlight | Blue |
| Input Voltage (V) | 2.7 to 3.3 |
| Pixel Resolution | 84 x 48 |
| PCB Size ( L x W ) mm | 45.5 x 43.5 |
| Motor Mounting Holes Dia. (mm) | 2 |
Package Includes:
- 1 x Nokia 5110 LCD Display.
Attachments:
Datasheet
Wiring Diagram
PCD8544 Library
Test Code
Video:
Build a DIY Digital Voltmeter Using Arduino Nano & OLED
Measuring voltage accurately is one of the most fundamental tasks in electronics. Whether you're debugging a circuit, monitoring...
Read More →
Arduino Automatic Plant Monitor: Sunlight, Moisture, Temperature
Table of ContentsIntroductionComponents and Hardware SetupWiring Diagram and ConnectionsComplete Code with ExplanationCustomization and ImprovementsTroubleshooting Common IssuesAdvanced Features and...
Read More →
Arduino Shield Stacking: Combining Multiple Shields Guide
Table of Contents What Is Arduino Shield Stacking? Shield Compatibility: Pin Conflicts and Solutions Common Shield Combinations That...
Read More →Technical Specifications
| SKU | AI0584 |
|---|---|
| Weight | 0.02 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Nokia 5110 LCD Display Module is a versatile tft lcd displays used across a wide range of applications including embedded HMI interfaces, Raspberry Pi touchscreen projects, Arduino display projects, industrial control panels, and information kiosks.
Common use cases:
- Adding a touch display to a Raspberry Pi project
- Building a portable game console
- Creating a dashboard for sensor data
This product is ideal for embedded developers, IoT makers, and industrial engineers.
Technical Tip: Check interface type (SPI, I2C, HDMI, RGB) and driver IC compatibility with your development board. IPS panels offer better viewing angles than TN.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Yash Sen (verified owner) –
Perfect Nokia 5110 LCD Display for my dashboard project. Easy to code with available libraries.
Ajay Yadav (verified owner) –
Great Nokia 5110 LCD Display. Backlight is even and text is very readable. Recommended!
Gaurav Khanna (verified owner) –
Good Nokia 5110 LCD Display. Contrast is nice. Had to adjust potentiometer for optimal view.
Raj Bhandari –
Great quality Nokia 5110 LCD Display. Resolution is sharp and colors are vivid. Very impressed.
Raj Bhatt (verified owner) –
Great Nokia 5110 LCD Display. Backlight is even and text is very readable. Recommended!
Kunal Reddy (verified owner) –
This Nokia 5110 LCD Display looks great in my project enclosure. Good viewing angles.
Zara Arora (verified owner) –
Perfect Nokia 5110 LCD Display for my dashboard project. Easy to code with available libraries.
Priya Rao (verified owner) –
Decent quality Nokia 5110 LCD Display. All pins working. Good for the price.
Ankur Dave (verified owner) –
Superb Nokia 5110 LCD Display! All pixels working perfectly. Soldering connections are clean.
Harsh Ghosh (verified owner) –
Superb Nokia 5110 LCD Display! All pixels working perfectly. Soldering connections are clean.
Nikhil Deshpande (verified owner) –
Great quality Nokia 5110 LCD Display. Resolution is sharp and colors are vivid. Very impressed.
Tanya Pillai (verified owner) –
This Nokia 5110 LCD Display is perfect for beginners. Connected to my Arduino in minutes.
Rajesh Krishnan (verified owner) –
Love this Nokia 5110 LCD Display. My weather station display looks professional with this.
Devansh Saxena (verified owner) –
Outstanding display quality! This Nokia 5110 LCD Display makes my project look premium.
Rajesh Sethi (verified owner) –
Excellent Nokia 5110 LCD Display! Display is bright and clear. Easy to interface with Arduino.
Farhan Srivastava (verified owner) –
Average Nokia 5110 LCD Display. Works but brightness is lower than I expected.
Bharat Gupta –
Outstanding display quality! This Nokia 5110 LCD Display makes my project look premium.
Nandini Joshi (verified owner) –
Perfect Nokia 5110 LCD Display for my dashboard project. Easy to code with available libraries.
Tanvi Kumar (verified owner) –
Good Nokia 5110 LCD Display. Display works well. Viewing angle could be slightly better.
Krishna Kamath (verified owner) –
Outstanding display quality! This Nokia 5110 LCD Display makes my project look premium.
Divyansh Kapoor (verified owner) –
Love this Nokia 5110 LCD Display. My weather station display looks professional with this.
Rishabh Luthra (verified owner) –
Perfect Nokia 5110 LCD Display for my dashboard project. Easy to code with available libraries.