Description:
Radiomaster AG01 CNC Hall Gimbal (HOLLOW SHAFT Version these gimbals have a hollow shaft to allow wiring for aftermarket 4mm gimbal stick ends with buttons and switches etc. These are for special use cases only. Unless this is required, normal AG01 CNC Hall Gimbals should be selected.
Features:
- With a hollow shaft to allow wiring for aftermarket 4mm gimbal stick ends with buttons and switches etc.
- Made with CNC processed aviation grade aluminum.
- Non-contact hall sensors, for accurate control inputs and precise centering.
- Quad precision bearings, for unparalleled stick feel.
Specifications:
| Item Type: | AG01 CNC Hall Gimbal- HOLLOWSHAFT- Set |
|---|---|
| Sensor Type | Hall Sensor |
| Operating Temperature (°C): | -20°c-85°c |
| Length (mm): | 60 |
| Width (mm): | 53 |
| Height (mm): | 56 |
Package Includes:
- 1 x AG01 HOLLOWSHAFT CNC Hall Gimbal (Centering / Throttle)
- 1 x TX16S Softer Tension Spring Set
- 1 x Hexagon socket screwdriver
- 1 x Manual
Radiomaster AG01 CNC Hall Gimbal (HOLLOW SHAFT Version） Overview
The Radiomaster AG01 CNC Hall Gimbal (HOLLOW SHAFT Version) is a high-precision replacement gimbal module for RC transmitter sticks. Featuring non-contact hall sensors and a hollow shaft design, it allows wiring for aftermarket 4 mm stick ends with integrated buttons or switches while delivering smooth, real-time response.
Key Features of Radiomaster AG01 CNC Hall Gimbal (HOLLOW SHAFT Version）
- Hollow shaft accommodates wiring for 4 mm gimbal stick ends with buttons or switches
- CNC-machined aviation-grade aluminum construction for superior durability
- Non-contact hall sensors ensure precise centering and zero delay linearity
- Quad precision bearings deliver consistent, friction-free stick feel
- Adjustable travel range from 38° to 54° to suit various transmitter setups
- Genuine Radiomaster product, shipped fast from Zbotic
Applications and Use Cases
- Customizing FPV drone transmitters with stick-end buttons for camera control
- Upgrading hobbyist radio controllers for smoother gimbal response
- Building DIY simulators requiring wired switches in stick ends
- Retrofitting older transmitters to add programmable functions on the sticks
- Racing setups where precise, real-time inputs are critical
How to Use Radiomaster AG01 CNC Hall Gimbal (HOLLOW SHAFT Version）
Install the gimbal into your compatible transmitter’s gimbal bay, route the wiring through the hollow shaft to your aftermarket 4 mm stick end, and solder according to your stick-end design. Connect the gimbal’s signal, ground, and 3.3 V supply to your transmitter board, then power on and calibrate the travel range (38°–54°) in your radio’s gimbal settings for optimal performance.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Can I use the hollow shaft version with standard AG01 stick ends?
Yes, the hollow shaft gimbal fits the same mounting footprint as standard AG01 units. However, its primary benefit is routing wiring—if you don’t need stick-end wiring, the normal AG01 CNC Hall Gimbal may be more cost-effective.
What voltage does the hall sensor gimbal require?
This gimbal operates on a DC 3.3 V supply, matching common RC transmitter gimbal ports. Ensure your transmitter’s gimbal connector provides 3.3 V for proper sensor function.
How do I adjust centering and travel limits?
After installation, enter your transmitter’s gimbal calibration menu to set center position and travel angles within the 38°–54° range. The non-contact hall sensors offer real-time, linear response without mechanical wear.
Tiny Whoop Build: 65mm Indoor FPV Drone Guide
Table of Contents Understanding Tiny Whoop Build Key Components and Requirements Step-by-Step Setup Guide Configuration and Optimisation Practical...
Read More →
How to Configure ArduPilot on Pixhawk: Step-by-Step Guide
Pixhawk is the most widely used open-source flight controller in the world, and ArduPilot is the firmware that...
Read More →
Drone ESC Calibration: Get All Motors Running Synchronized
Table of Contents What Is ESC Calibration and Why Does It Matter? Understanding ESC Signal Types Tools and...
Read More →Technical Specifications
| Brand | Radiomaster |
|---|---|
| Model | AG01 |
| SKU | AI7322 |
| Availability | Out of Stock |
Applications & Use Cases
The Radiomaster AG01 CNC Hall Gimbal (HOLLOW SHAFT Version） is a versatile drone transmitter and receiver used across a wide range of applications including FPV drone control, RC aircraft, ground vehicles, and long-range drone operations.
Common use cases:
- Setting up a new FPV quad with digital link
- Replacing a receiver after a crash
- Building a long-range fixed-wing aircraft
This product is ideal for FPV pilots, RC hobbyists, and drone builders.
Technical Tip: ELRS (ExpressLRS) offers excellent range and low latency at 2.4GHz. Ensure your transmitter and receiver use the same protocol.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Radiomaster product sourced from authorized channels
Isha Sen (verified owner) –
Received the Radiomaster AG01 CNC Hall Gimbal (HOLLOW in great condition. Testing done, everything works perfectly.
Naveen Rawat (verified owner) –
Okay Radiomaster AG01 CNC Hall Gimbal (HOLLOW. Gets the job done for my basic drone project. Nothing exceptional.
Prateek Ghosh –
Outstanding Radiomaster AG01 CNC Hall Gimbal (HOLLOW! Installed it on my racing quad and the performance is amazing.
Ankur Singh –
Good product overall. My drone is flying well with this Radiomaster AG01 CNC Hall Gimbal (HOLLOW. Satisfied with the purchase.
Rahul Dhillon (verified owner) –
Solid Radiomaster AG01 CNC Hall Gimbal (HOLLOW. Not the absolute best but excellent value for the price point.
Atharv Rawat (verified owner) –
Decent Radiomaster AG01 CNC Hall Gimbal (HOLLOW for the price. Using it in my quadcopter, performs well overall.
Sahil Tiwari –
Okay Radiomaster AG01 CNC Hall Gimbal (HOLLOW. Gets the job done for my basic drone project. Nothing exceptional.
Vishal Pandey (verified owner) –
Top quality Radiomaster AG01 CNC Hall Gimbal (HOLLOW. I’m a regular customer of Zbotic and they never disappoint.
Kiara Mishra –
Bought this for my college drone project. Works great, professor was impressed!
Mahesh Agarwal (verified owner) –
Nice Radiomaster AG01 CNC Hall Gimbal (HOLLOW, does the job. Delivery took a couple of extra days but product is solid.
Abhishek Bose (verified owner) –
Been using this Radiomaster AG01 CNC Hall Gimbal (HOLLOW for 3 months now, zero issues. Great product.
Sanya Panchal (verified owner) –
Nice Radiomaster AG01 CNC Hall Gimbal (HOLLOW, does the job. Delivery took a couple of extra days but product is solid.
Rakesh Mishra –
This Radiomaster AG01 CNC Hall Gimbal (HOLLOW exceeded my expectations. Installed it yesterday and took a successful test flight today.
Arjun Shetty (verified owner) –
Top quality Radiomaster AG01 CNC Hall Gimbal (HOLLOW. I’m a regular customer of Zbotic and they never disappoint.
Yogesh Patil (verified owner) –
Excellent product for the price. My drone flies smoothly with this Radiomaster AG01 CNC Hall Gimbal (HOLLOW. Highly recommended!
Kavya Reddy (verified owner) –
Good Radiomaster AG01 CNC Hall Gimbal (HOLLOW. Works well for my drone build. Packaging could be slightly better.
Dhruv Chauhan (verified owner) –
Good quality Radiomaster AG01 CNC Hall Gimbal (HOLLOW. Minor scratches on arrival but functionally perfect.
Sneha Sen (verified owner) –
Perfect for my agriculture drone project. This Radiomaster AG01 CNC Hall Gimbal (HOLLOW handles the weight effortlessly.
Ankur Arora (verified owner) –
Using this Radiomaster AG01 CNC Hall Gimbal (HOLLOW in my FPV drone build. Quality is top notch. Very happy with the purchase.
Devansh Rathore (verified owner) –
Excellent Radiomaster AG01 CNC Hall Gimbal (HOLLOW! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Ankit Pillai –
Perfect for my agriculture drone project. This Radiomaster AG01 CNC Hall Gimbal (HOLLOW handles the weight effortlessly.
Darshan Batra (verified owner) –
Very impressed with this Radiomaster AG01 CNC Hall Gimbal (HOLLOW. My drone’s performance improved noticeably.