This is the JST connector variant of the JST SH 6-pin Connectors (1.50mm pin spacing with 145mm wires) (1.50mm pin spacing with 145mm wires) in Battery Harness. Available at ₹12.74 (₹10.80 + GST) with free shipping across India.
This is a JST SH 6-Pin Connector (1.50mm pin spacing) with 145mm multicolored 24 AWG wires, terminating in bare wires at the other end. The female connector is designed for versatility and is highly sought after by multi-rotor hobbyists. It is commonly used for various components and applications, such as GPS modules, offering reliable connectivity for a wide range of projects.
Specification:
| Connector Type | JST SH (Micro JST) |
|---|---|
| Pin Spacing | 1.50 mm |
| Pin/wire Count | 6 |
| Color | Multicolor |
| Wire Length | 145mm |
Package Includes:
1 x JST SH 6-pin Connectors (1.50mm pin spacing with 145mm wires)
JST SH 6-pin Connectors (1.50mm pin spacing with 145mm Overview
The JST SH 6-pin connector harness features a compact 1.50 mm pitch female JST SH housing on one end and six colour-coded 145 mm wires (24 AWG) terminating in bare leads on the other. Ideal for linking small modules, sensors and components where space is limited, it delivers reliable, plug-and-play connectivity in multi-rotor, robotics and electronics projects.
Key Features of JST SH 6-pin Connectors (1.50mm pin spacing with 145mm
- Compact 1.50 mm pin spacing for space-saving board connections
- Six pre-crimped 24 AWG wires, colour-coded for quick identification
- 145 mm length: ample reach for tidy cable routing in small assemblies
- Bare wire ends ready for soldering, terminal blocks or PCB screw clamps
- Durable housing with secure latch locks for vibration-resistant mating
- Fast shipping from Zbotic ensures you get your parts within 24 hours*
Applications and Use Cases
- Connecting GPS modules to micro flight controllers in racing drones
- Linking I²C or SPI sensor boards to development modules in robotics
- Providing power and signal lines to miniature cameras and telemetry units
- Creating custom harnesses for wearable electronics or compact PCBs
- Integrating small Li-ion fuel gauge or battery monitor boards
- Prototyping multi-wire connections in educational electronics kits
How to Use JST SH 6-pin Connectors (1.50mm pin spacing with 145mm
Plug the JST SH female housing onto a matching 6-pin male header, ensuring the latch clicks securely. Route the 145 mm wires to your target circuit, trim to length, strip the bare ends, then solder or clamp into your PCB or terminal block. Colour-coded insulation helps you map power, ground and signal lines correctly before powering up.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Are these connectors compatible with other JST SH male headers?
Yes, the female housing mates precisely with standard 6-pin JST SH male headers rated for 1.50 mm pitch.
What wire gauge and insulation type is used?
This harness uses 24 AWG PVC-insulated wires, offering a balance of flexibility and current capacity for signal and low-power applications.
Can I shorten or extend the wire length?
Absolutely. The 145 mm bare leads can be trimmed, stripped and soldered to extensions or directly to your board, enabling custom lengths.
Fast Charging Protocols: QC 3.0 vs USB-PD vs VOOC Explained
Fast Charging Protocols: QC 3.0 vs USB-PD vs VOOC Explained If you've ever shopped for a charger or...
Read More →
Battery Charger IC: CN3065, MCP73831, and BQ24074
Choosing the right battery charger IC determines the safety, efficiency, and longevity of your lithium battery charging circuit....
Read More →
Energy Harvesting: Powering IoT Devices from Ambient Sources
Energy Harvesting: Powering IoT Devices from Ambient Sources What if your IoT sensor never needed a battery change?...
Read More →Technical Specifications
| Size | 1.50mm |
|---|---|
| Pin Count | 6-pin |
| Connector Type | JST |
| SKU | AI6217 |
| Weight | 0.0 kg |
| Availability | Out of Stock |
Applications & Use Cases
The JST SH 6-pin Connectors (1.50mm pin spacing with 145mm wires) (1.50mm pin spacing with 145mm wires) is a versatile battery harness used across a wide range of applications including parallel/series battery connection, drone power wiring, custom cable assemblies, and charging adapters.
Common use cases:
- Converting between connector types for different chargers
- Wiring batteries in parallel for extended capacity
- Creating custom power leads
This product is ideal for RC hobbyists and drone builders.
Technical Tip: Use wire gauge appropriate for your current draw: 14AWG for up to 30A, 12AWG for up to 60A.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Manish Dave (verified owner) –
This JST SH 6-pin Connectors is exactly what I needed. Output current capacity is as advertised.
Ashwin Verma (verified owner) –
Perfect JST SH 6-pin Connectors for my portable project. Battery life is better than expected.
Dev Rajan (verified owner) –
Nice JST SH 6-pin Connectors. Works as expected for my power needs. Good efficiency.
Bharat Patel (verified owner) –
This JST SH 6-pin Connectors is reliable and efficient. Running my IoT setup 24/7 with no issues.
Ishaan Sethi (verified owner) –
Great quality JST SH 6-pin Connectors. Powering my entire project board with this. Very reliable.
Vinay Gill (verified owner) –
Decent JST SH 6-pin Connectors. Voltage output is accurate. Compact form factor is a plus.
Ojas Luthra (verified owner) –
Great quality JST SH 6-pin Connectors. Powering my entire project board with this. Very reliable.
Ankur Rao (verified owner) –
Bought multiple units of this JST SH 6-pin Connectors. All consistent quality. Zbotic is reliable.
Sunil Mehta (verified owner) –
Decent JST SH 6-pin Connectors. Voltage output is accurate. Compact form factor is a plus.
Neha Nayak (verified owner) –
Great quality JST SH 6-pin Connectors. Powering my entire project board with this. Very reliable.
Tanya Reddy (verified owner) –
Excellent JST SH 6-pin Connectors! Output is stable and reliable. Perfect for my electronics project.
Abhishek Saxena (verified owner) –
Great quality JST SH 6-pin Connectors. Powering my entire project board with this. Very reliable.
Parth Iyer (verified owner) –
Very satisfied with this JST SH 6-pin Connectors. Using it in my solar project, charges perfectly.
Sarika Kamath (verified owner) –
This JST SH 6-pin Connectors is reliable and efficient. Running my IoT setup 24/7 with no issues.
Sarika Hegde (verified owner) –
Great quality JST SH 6-pin Connectors. Powering my entire project board with this. Very reliable.
Ayush Shah (verified owner) –
Good JST SH 6-pin Connectors. Output is stable. Gets slightly warm under full load but nothing concerning.
Aisha Joshi –
Good JST SH 6-pin Connectors. Output is stable. Gets slightly warm under full load but nothing concerning.
Siddharth Bhatt (verified owner) –
Perfect JST SH 6-pin Connectors for my portable project. Battery life is better than expected.
Rajesh Kamath (verified owner) –
This JST SH 6-pin Connectors is reliable and efficient. Running my IoT setup 24/7 with no issues.
Vipin Patel (verified owner) –
Perfect JST SH 6-pin Connectors for my portable project. Battery life is better than expected.
Ashwin Iyer (verified owner) –
Great JST SH 6-pin Connectors. Voltage is rock solid under varying loads. Highly recommended.
Himanshu Mukherjee (verified owner) –
Good JST SH 6-pin Connectors. Output is stable. Gets slightly warm under full load but nothing concerning.
Jatin Deshpande –
Very satisfied with this JST SH 6-pin Connectors. Using it in my solar project, charges perfectly.
Harshit Joshi –
Okay JST SH 6-pin Connectors. Output is slightly off from specified but within usable range.
Parth Hegde (verified owner) –
Love this JST SH 6-pin Connectors. Compact size and excellent performance. Worth the price.
Vikram Malhotra –
This JST SH 6-pin Connectors is exactly what I needed. Output current capacity is as advertised.
Om Rao (verified owner) –
Very satisfied with this JST SH 6-pin Connectors. Using it in my solar project, charges perfectly.