This is the 290mm variant of the Martian IV 7'' 290mm Quadcopter Frame in 3 inch to 7 inch, Drone Frame and Accessories. Available at ₹2,468.55 (₹2,351.00 + GST) with free shipping across India.
Looking for 290mm Quadcopter Frame? Martian IV 7” 290mm Quadcopter Frame is available at Zbotic with fast shipping across India.
This Quadcopter Frame is the advanced version of Martin-III reptile quadcopter frame It keeps everything that has made the Martian-III Quadcopter frame successful. The MARTIAN-IV REPTILE Quadcopter Frame is a Advanved quadcopter frame
Though this is the upgraded version of Martin III frame yet it is made up of less quality carbon fiber as compared to Martin IV So, the price of the Martian-IV Quadcopter frame is less than Martian-III Quadcopter frame.
This MARTIAN-IV REPTILE 290mm Quadcopter frame is made from Carbon Fiber which makes it tough and durable. They have carbon fiber arms of thickness 4mm which ensure no more arm breakage at the motor mounts on a hard landing. The arms equip dampers at the end, which protects motors during the crash. The frame enables quick swapping of arms in race pit settings.
The carbon fiber is mostly accepted material for frame designing because of its high stiffness to weight ratio. The Carbon Fiber Frames are very rigid and improve stability and flight performance.
The frame is lightweight and possesses thick arms, so as to give them good mechanical strength. The mini-size design of this quadcopter frame makes it aerodynamically efficient which will require lower throttle to hover.
The frame has the wheelbase of 290mm and weighs around 130gm.
The MARTIAN-IV REPTILE Quadcopter Frame equips anodized alloy spacers. The arms of this carbon fiber frame feature multiple motor mounting holes so as to fit a variety of motors.
We are offering a full line of multi-rotor accessories,
Multirotor motors
ESC (Electronic speed controller)
Orange Li-Po Batteries
Flight Controllers
FPV Cameras
Gimbals
Propellers
Remotes
Note: 1) The dimensions and weight may have ±2% error.
Features :
- Lightweight and Durable.
- Made by super strong and advanced engineering material.
- The frame has excellent strength.
- The arm equips dampers for the safe landing.
- The arm has multiple motor mounting holes.
Specification:
Model: Martian-IV
Material: Carbon Fiber
Wheelbase: 290 mm
Arm Thickness: 4 mm
Other board : 2mm/1.5mm
Weight: 200 gm
| Brand Name: | Readytosky |
| For Vehicle Type: | Airplanes |
| Four-wheel Drive Attributes: | Motors |
| Material: | Carbon fiber |
| Model Number: | Reptile Martian IV 7 290 mm |
| RC Parts & Accs: | Motors |
| Remote Control Peripherals/Devices: | Motor |
| Technical parameters: | Value 4 |
| Tool Supplies: | Painted |
| Upgrade Parts/Accessories: | Car Shell |
| Use: | Vehicles & Remote Control Toys |
Package Includes :
About 290mm Quadcopter Frame
Martian IV 7” 290mm Quadcopter Frame is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Generic, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Generic
- SKU: AI4427
- Category: 3 inch to 7 inch
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about 290mm Quadcopter Frame and other products.
Applications
290mm Quadcopter Frame can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your 290mm Quadcopter Frame today and start building.
Martian IV 7” 290mm Quadcopter Frame Overview
The Martian IV is a 7″ quadcopter frame built on a 290 mm wheelbase, designed for hobbyist FPV and freestyle drones. Constructed from carbon fiber with 4 mm thick arms, it offers robust durability and a lightweight platform for mounting your motors, flight controller, and power distribution board.
Key Features of Martian IV 7” 290mm Quadcopter Frame
- Durable carbon fiber construction for impact resistance and long-term use
- 290 mm wheelbase optimized for 7″ propeller setups
- 4 mm thick arms to minimize arm breakage at motor mounts
- Top and bottom stack plates compatible with 2 mm and 1.5 mm boards
- Lightweight design at just 200 g for agile flight performance
- Cost-effective alternative to the Martian-III frame
- Fast shipping across India from Zbotic’s warehouse
Applications and Use Cases
- FPV racing builds using 7″ propellers for high-speed maneuvers
- Freestyle drones requiring a strong, lightweight carbon frame
- Aerial videography setups with room for flight controller and PDB stacks
- Educational prototypes and DIY robotics projects
- Replacement or upgrade frame for existing 290 mm wheelbase builds
How to Use Martian IV 7” 290mm Quadcopter Frame
Begin by attaching the 4 mm carbon fiber arms to the central stack plates using the included hardware. Mount your brushless motors at each arm end, then stack your 2 mm or 1.5 mm flight controller and PDB between the top and bottom plates. Secure plates with standoffs, route power and signal wires neatly, and balance the frame before installing props and conducting a test hover.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
What propeller size is this frame designed for?
The 290 mm wheelbase of the Martian IV is optimized for 7″ propellers, offering a balance of thrust and efficiency for racing and freestyle builds.
What is the total weight of the Martian IV frame?
The assembled frame weighs approximately 200 g, making it light enough for agile flight while retaining structural strength.
What board mounting options are available?
The Martian IV includes stacked plate mounting holes compatible with 2 mm and 1.5 mm boards, allowing you to fit your flight controller, PDB, ESC stack, and other accessories.
How to Configure ArduPilot on Pixhawk: Step-by-Step Guide
Pixhawk is the most widely used open-source flight controller in the world, and ArduPilot is the firmware that...
Read More →
ESC Protocols Explained: DShot, OneShot, and PWM
The communication protocol between your flight controller and ESCs directly affects how responsive and reliable your drone feels....
Read More →
AI Vision Drone with Waveshare Camera Module
Building an AI vision drone with a Waveshare camera module opens up possibilities that were unimaginable just a...
Read More →Technical Specifications
| Size | 290mm |
|---|---|
| SKU | AI4427 |
| Weight | 0.26 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Martian IV 7'' 290mm Quadcopter Frame is a versatile 3 inch to 7 inch used across a wide range of applications including FPV racing builds, freestyle drones, cinematic drones, and agricultural spraying platforms.
Common use cases:
- Building a new racing quad
- Replacing a broken frame arm after a crash
- Mounting a camera gimbal on a custom platform
This product is ideal for FPV builders, drone racing enthusiasts, and commercial drone operators.
Technical Tip: Carbon fiber frames offer the best strength-to-weight ratio. Ensure motor-to-motor distance matches your propeller size.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Pankaj Iyer (verified owner) –
This Martian IV 7” 290mm Quadcopter Frame exceeded my expectations. Installed it yesterday and took a successful test flight today.
Hemant Menon (verified owner) –
Good Martian IV 7” 290mm Quadcopter Frame. Works well for my drone build. Packaging could be slightly better.
Pallavi Chauhan (verified owner) –
Outstanding Martian IV 7” 290mm Quadcopter Frame! Installed it on my racing quad and the performance is amazing.
Utkarsh Saini (verified owner) –
Decent Martian IV 7” 290mm Quadcopter Frame for the price. Using it in my quadcopter, performs well overall.
Riya Grewal (verified owner) –
Nice Martian IV 7” 290mm Quadcopter Frame, does the job. Delivery took a couple of extra days but product is solid.
Shivam Thakur (verified owner) –
Excellent Martian IV 7” 290mm Quadcopter Frame! Perfect for my quadcopter build. Arrived well packed and works flawlessly.
Hemant Goyal (verified owner) –
Superb Martian IV 7” 290mm Quadcopter Frame! Built my first drone with this and it performed beyond expectations.
Siddharth Sethi (verified owner) –
Good quality Martian IV 7” 290mm Quadcopter Frame. Minor scratches on arrival but functionally perfect.
Bharat Bhatt (verified owner) –
Amazing build quality! This Martian IV 7” 290mm Quadcopter Frame is sturdy and lightweight at the same time.
Sarthak Parekh –
Decent Martian IV 7” 290mm Quadcopter Frame. Took some effort to set up but working now.
Sneha Sethi (verified owner) –
Nice Martian IV 7” 290mm Quadcopter Frame, does the job. Delivery took a couple of extra days but product is solid.
Lalit Deshpande (verified owner) –
My 5th order from Zbotic. This Martian IV 7” 290mm Quadcopter Frame is excellent as always. Totally reliable store.
Aditya Chopra (verified owner) –
Great quality Martian IV 7” 290mm Quadcopter Frame. Perfect specs for my drone project. Fast delivery too!
Yash Dhillon (verified owner) –
Perfect for my agriculture drone project. This Martian IV 7” 290mm Quadcopter Frame handles the weight effortlessly.
Gauri Tandon (verified owner) –
Amazing build quality! This Martian IV 7” 290mm Quadcopter Frame is sturdy and lightweight at the same time.
Rohan Shetty –
Good product overall. My drone is flying well with this Martian IV 7” 290mm Quadcopter Frame. Satisfied with the purchase.
Vikram Pillai (verified owner) –
Very impressed with this Martian IV 7” 290mm Quadcopter Frame. My drone’s performance improved noticeably.
Karan Malhotra –
Solid Martian IV 7” 290mm Quadcopter Frame. Not the absolute best but excellent value for the price point.
Arjun Yadav (verified owner) –
This Martian IV 7” 290mm Quadcopter Frame is exactly what I needed for my drone. Works perfectly, very reliable.