This is the 3V variant of the Arduino Pro Mini 328 – 3.3V/8 MHz in Boards Compatible with Arduino. Available at ₹116.82 (₹99.00 + GST) with free shipping across India.
Looking for Arduino Pro Mini 328? Arduino Pro Mini 328 – 3.3V/8 MHz is available at Zbotic with fast shipping across India.
Product Description
It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (3.3V), lack of connectors, and USB off board.
We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.
Feature:
- Onboard Power and Status LEDs
- USB connection off board
- Weighs less than 2 grams!
- Supports auto-reset
- Over current protected
- ATmega328 running at 8MHz with external resonator (0.5% tolerance)
- Low-voltage board needs no interfacing circuitry to popular 3.3V devices and modules (GPS, accelerometers, sensors, etc)
Package Includes :
- 1 x Arduino Pro Mini 328 – 3.3V/8 MHz
About Arduino Pro Mini 328
Arduino Pro Mini 328 – 3.3V/8 MHz is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Arduino, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Arduino
- SKU: AI1998
- Category: Boards Compatible with Arduino
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about Arduino Pro Mini 328 and other products.
Applications
Arduino Pro Mini 328 can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your Arduino Pro Mini 328 today and start building.
About Arduino Pro Mini 328
Arduino Pro Mini 328 – 3.3V/8 MHz is available at Zbotic, India’s trusted electronics and robotics store. Manufactured by Arduino, this product is designed for hobbyists, students, and professionals working on electronics, robotics, and DIY projects.
Product Details
- Brand: Arduino
- SKU: AI1998
- Category: Other Measuring Instrument
Why Buy from Zbotic?
Zbotic offers a wide range of electronics components, development boards, sensors, and robotics parts. All products are quality-checked and shipped within 24 hours. Free shipping on qualifying orders. We offer COD (Cash on Delivery) and secure online payment options. Our customer support team is available to help with technical queries about Arduino Pro Mini 328 and other products.
Applications
Arduino Pro Mini 328 can be used in a variety of projects including Arduino projects, Raspberry Pi builds, drone assembly, 3D printing, IoT applications, and educational experiments. Whether you are a beginner or an advanced user, this component provides the reliability and performance you need. Order your Arduino Pro Mini 328 today and start building.
Arduino Pro Mini 328 – 3.3V/8 MHz Overview
The Arduino Pro Mini 328 – 3.3V/8 MHz is a compact, low-power development board based on the ATmega328 microcontroller. Designed for embedded projects, it runs at 8 MHz on a 3.3 V rail and features a minimal form factor without pre-soldered headers. This board is ideal for space-constrained applications where custom wiring and low-voltage operation are required.
Key Features of Arduino Pro Mini 328 – 3.3V/8 MHz
- ATmega328 microcontroller running at 8 MHz on 3.3 V for low-power operation
- On-board 3.3 V regulator with up to 150 mA output and over-current protection
- Wide DC input range from 3.3 V up to 12 V for flexible power sources
- Unpopulated pin headers allow custom connector orientation and soldering
- Slim, lightweight design measuring just 18 × 33 mm for tight enclosures
- Genuine Arduino Pro Mini shipped fast across India from Zbotic
Applications and Use Cases
- Battery-powered sensor nodes and wearable electronics
- Portable data loggers with custom input wiring
- Low-power robotics and drone subsystem controllers
- Remote control modules and wireless prototyping (requires separate radio)
- Compact home automation devices and environmental monitors
How to Use Arduino Pro Mini 328 – 3.3V/8 MHz
Solder your preferred pin headers or wires onto the unpopulated pads, connect a 3.3 V USB-to-serial adapter (FTDI) to VCC, GND, TX, RX and DTR, then select “Arduino Pro or Pro Mini (3.3V, 8 MHz)” in the Arduino IDE. Upload sketches as usual and power the board from an external supply between 3.3 V and 12 V to drive the regulator and onboard circuitry.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Do I need a USB cable to program the Pro Mini?
No, the Pro Mini lacks an onboard USB interface. You must use a 3.3 V FTDI or similar USB-to-serial adapter connected to VCC, GND, TX, RX and DTR to upload sketches.
Can I power the board from a Li-Po battery?
Yes. You can feed a Li-Po battery (3.7 V nominal) directly into the RAW input or regulated 3.3 V rail, keeping total board current under the 150 mA limit of the onboard regulator.
Are header pins included in the package?
No. The Arduino Pro Mini ships without pins soldered, allowing you to choose and position through-hole headers, right-angle connectors or direct wire soldering according to your project needs.
Joystick Module PS2: Arduino Robot and Game Controller
The PS2 joystick module is one of the most satisfying components to add to any Arduino project. That...
Read More →
PCB Capabilities & Specifications
PCB Manufacturing Capabilities Via Covering Options Tented: Vias covered with solder mask on both sides (default, recommended) Untented:...
Read More →
Arduino Voltage Divider: Measure Higher Voltages Safely
Table of ContentsIntroductionComponents and Hardware SetupWiring Diagram and ConnectionsComplete Code with ExplanationCustomization and ImprovementsTroubleshooting Common IssuesAdvanced Features and...
Read More →Technical Specifications
| Brand | Arduino |
|---|---|
| Operating Voltage | 3.3V |
| Frequency | 8 MHz |
| SKU | AI1998 |
| Weight | 0.003 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Arduino Pro Mini 328 – 3.3V/8 MHz is a versatile boards compatible with arduino used across a wide range of applications including electronics learning, robotics, home automation, sensor interfacing, and motor control.
Common use cases:
- Learning programming and electronics
- Building a line-following robot
- Creating a home automation hub
This product is ideal for students, hobbyists, and electronics beginners.
Technical Tip: Arduino Uno is the standard learning board. Mega offers more pins for complex projects. Nano suits breadboard prototyping.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine Arduino product sourced from authorized channels
Aryan Sethi (verified owner) –
Good Arduino Pro Mini 328 – 3.3V/8. Works well with Arduino IDE. Headers could be soldered more neatly.
Riya Gupta (verified owner) –
Good Arduino Pro Mini 328 – 3.3V/8. Works well with Arduino IDE. Headers could be soldered more neatly.
Shruti Sethi (verified owner) –
Good Arduino Pro Mini 328 – 3.3V/8. Took a while to get the drivers working but board itself is solid.
Rashmi Panchal (verified owner) –
Nice Arduino Pro Mini 328 – 3.3V/8 for the price. Using it in my college project, performs well.
Deepika Joshi (verified owner) –
Great Arduino Pro Mini 328 – 3.3V/8 for my college mini project. Got good marks thanks to this working perfectly!
Urmi Batra (verified owner) –
Great quality Arduino Pro Mini 328 – 3.3V/8. Uploaded my first sketch and it worked flawlessly. Ideal for beginners.
Sanya Agarwal (verified owner) –
Decent quality Arduino Pro Mini 328 – 3.3V/8. Some pins needed cleaning but works fine now.
Manish Hegde (verified owner) –
This Arduino Pro Mini 328 – 3.3V/8 is a must-have for any maker. Works perfectly with Arduino IDE.
Rakesh Choudhury (verified owner) –
Very satisfied with this Arduino Pro Mini 328 – 3.3V/8. Fast shipping and genuine components. Zbotic is the best!
Deepika Sharma (verified owner) –
Using this Arduino Pro Mini 328 – 3.3V/8 for my smart farming project. Reliable and easy to interface.
Vansh Batra (verified owner) –
Good Arduino Pro Mini 328 – 3.3V/8. Took a while to get the drivers working but board itself is solid.
Nikhil Parekh –
Decent quality Arduino Pro Mini 328 – 3.3V/8. Some pins needed cleaning but works fine now.
Rohit Thakur (verified owner) –
Fantastic Arduino Pro Mini 328 – 3.3V/8! All GPIO pins tested and working. Great for prototyping.
Dev Agarwal –
Excellent Arduino Pro Mini 328 – 3.3V/8! Perfect for my Arduino project. All pins working correctly.
Diya Dhawan (verified owner) –
Using this Arduino Pro Mini 328 – 3.3V/8 for my smart farming project. Reliable and easy to interface.
Sahil Garg –
Superb Arduino Pro Mini 328 – 3.3V/8! Compatible with all my existing Arduino shields and libraries.
Atharv Jain (verified owner) –
Good Arduino Pro Mini 328 – 3.3V/8. Works well with Arduino IDE. Headers could be soldered more neatly.
Aman Modi (verified owner) –
This Arduino Pro Mini 328 – 3.3V/8 made my robotics project so much easier. Highly recommended for students.