This is the 12V variant of the RGB 5050 12V LED Board 7 Colors with DIP Switch in LED Module. Available at ₹218.30 (₹185.00 + GST) with free shipping across India.
Looking for 12v Board? RGB 5050 12V LED Board 7 Colors with DIP Switch is available at Zbotic with fast shipping across India.
RGB 5050 12V LED Board 7 Colors with DIP Switch
This is RGB 5050 12V LED Board 7 Colors with DIP Switch. The RGB LED Board 5050 12V is designed for the Multi-rotors & FPV Quad-rotors with BEC power or any other 11-13V power source. It comes with three RGB5050 LEDs & one code switch.
Seven colors are selectable using the code switches. This LED board gives an eye-catching effect to your multi-rotors or planes.
Selectable Colours & Power
Package Includes :
1 x RGB 5050 12V LED Board.
1 x Cable 30 cm.
RGB 5050 12V LED Board 7 Colors with DIP Switch Overview
The RGB 5050 12V LED Board 7 Colors with DIP Switch is a compact lighting module featuring three SMD 5050 LEDs and an onboard DIP switch for selecting seven distinct colors. Designed for 11–13V DC systems—such as 12V BEC outputs on multi-rotor aircraft—it adds vibrant, attention-grabbing illumination to drones, planes, and custom electronics projects.
Key Features of RGB 5050 12V LED Board 7 Colors with DIP Switch
- Seven selectable colors (Red, Green, Blue, Purple, Cyan, Yellow, White) via a simple 3-position DIP switch
- Operates on any 11–13V DC supply (ideal for 12V BEC on FPV quadcopters)
- Low current draw: 30mA per color channel, up to 90mA when all three are ON
- Compact 47×10 mm PCB footprint weighing only 5 g for minimal added mass
- Easy integration into multi-rotor frames, RC planes, robotics projects, and lighting strips
- Genuine product with fast shipping from Zbotic across India
Applications and Use Cases
- Orientation lights on FPV quadcopters and hexacopters
- Position indicators for RC planes and helicopters
- Status or notification lamp on custom robotics and embedded electronics
- Accent lighting in model cars, boats, and RC tanks
- Decorative backlighting for instrument panels or control stations
- Portable LED markers for field testing and prototyping
How to Use RGB 5050 12V LED Board 7 Colors with DIP Switch
Connect the board’s positive (+) and ground (–) pads to an 11–13V DC source, such as a 12V BEC output. Use the three-position DIP switch to toggle each R, G, and B channel on or off—combining switches yields your desired color. Secure the board with adhesive tape or nylon standoffs and ensure wiring is insulated for vibration-free operation.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
How do I select different colors?
Use the three-position DIP switch to enable each R, G, B LED channel. Turning on individual or combined channels yields the seven available colors without any soldering or programming.
What power supply does this board require?
It runs on 11–13V DC (12V BEC recommended). Each color channel draws 0.03 A, so allow up to 0.09 A from your power source if all three channels are active.
Can I install this on my FPV quadcopter frame?
Yes. The 47×10 mm PCB is lightweight (5 g) and fits easily on drone arms or under canopies. Secure it with double-sided tape or nylon standoffs near your BEC output for reliable illumination.
Capacitor ESR Explained: Why It Matters in Power Circuits
If you have ever built a power supply or a DC-DC converter and measured more ripple voltage than...
Read More →
Op-Amp Guide: LM741 and LM358 Practical Circuits
Operational amplifiers (op-amps) are the Swiss army knives of analogue electronics, enabling signal amplification, filtering, comparison, and mathematical...
Read More →
PCB Thermal Design: Copper Pour and Via Stitching
Table of Contents Why PCB Thermal Design Matters Copper Pour for Heat Spreading Thermal Vias: Moving Heat Between...
Read More →Technical Specifications
| Operating Voltage | 12V |
|---|---|
| SKU | AI1093 |
| Weight | 0.07 kg |
| Availability | Out of Stock |
Applications & Use Cases
The RGB 5050 12V LED Board 7 Colors with DIP Switch is a versatile led module used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
Saurabh Batra (verified owner) –
Love this RGB 5050 12V LED Board 7. Click sound is satisfying and switching is instantaneous.
Sumit Bisht –
Decent RGB 5050 12V LED Board 7. Trigger voltage is compatible with both 3.3V and 5V logic.
Saurabh Rao (verified owner) –
Good RGB 5050 12V LED Board 7. Works well. LED indicators are helpful for debugging.
Vipin Saxena (verified owner) –
Great RGB 5050 12V LED Board 7. Easy to integrate with NodeMCU for WiFi-based control.
Himanshu Menon –
Perfect RGB 5050 12V LED Board 7 for my IoT project. Controlling appliances remotely works flawlessly.
Rohit Trivedi –
Love this RGB 5050 12V LED Board 7. Click sound is satisfying and switching is instantaneous.
Anand Batra –
Good quality RGB 5050 12V LED Board 7. Using it for my college project. Performs as expected.
Vipin Solanki (verified owner) –
This RGB 5050 12V LED Board 7 works perfectly with my Arduino. Easy to wire and control.
Raj Negi (verified owner) –
Excellent RGB 5050 12V LED Board 7! Switching is clean and reliable. Using it for home automation.
Tanvi Mehta (verified owner) –
Superb RGB 5050 12V LED Board 7! Using it to control my garden irrigation system. Very dependable.
Vikram Grewal –
Good RGB 5050 12V LED Board 7. Works well. LED indicators are helpful for debugging.
Raghav Bose –
Love this RGB 5050 12V LED Board 7. Click sound is satisfying and switching is instantaneous.
Himanshu Patil (verified owner) –
Great quality RGB 5050 12V LED Board 7. All channels working. Optocoupler isolation is a nice feature.
Sarika Pandey –
Love this RGB 5050 12V LED Board 7. Click sound is satisfying and switching is instantaneous.
Aarav Bhandari –
Great quality RGB 5050 12V LED Board 7. All channels working. Optocoupler isolation is a nice feature.
Ashish Rao (verified owner) –
Excellent RGB 5050 12V LED Board 7! Switching is clean and reliable. Using it for home automation.
Ajay Khanna (verified owner) –
Good RGB 5050 12V LED Board 7. Works well. LED indicators are helpful for debugging.