Black Plastic Storage Box Case Holder for Battery 4 X AA Cell Box, with DC Power Plug
This product is a black plastic case that holds four AA batteries and has a DC power plug. It has a 5-inch cable with a 5.5×2.1mm barrel jack connector at the end, which is compatible with the Arduino and other devices that use the same connector. You can use this case to power your projects with a 6V battery source.
The case keeps your batteries neat and safe. It has leads that are easy to solder and connect to your circuits. This is an ideal battery holder for devices that require a 6V external battery.
Note: The voltage regulator on your device may have a voltage drop of about 1V (this can vary depending on the regulator). This means that with normal alkaline batteries, this pack will provide ~5.5V, which will make a typical 5V device run at around 4 to 4.5V. The actual voltage will depend on the specific board and processor you are using with this battery pack.
- Holds 4 AA batteries.
- The standard 5.5×2.1mm barrel jack at the output.
- Easy install, convenient to use.
- High-quality plastic material.
|Compatible Battery Size
|Cable Length (cm)
|Dimensions in mm (LxWxH)
|7 × 6 × 3 cm
1 x 4xAA Battery Holder Case without cover. (Battery Not Included).