This is the 24V variant of the DC24V 2507 Hydraulic Cooling Fan with XH2.54-2P 30CM Cable Size:25*25*7MM in Cooling Fans. Available at ₹107.38 (₹91.00 + GST) with free shipping across India.
Looking for Dc24v Cable 30cm? DC24V 2507 Hydraulic Cooling Fan with XH2.54-2P 30CM Cable Size:25*25*7MM is available at Zbotic with fast shipping across India.
DC24V 2507 Hydraulic Cooling Fan with XH2.54-2P 30CM Cable Size:25*25*7MM
This 3D printer fan is small but powerful. It cools down the extruder and prevents overheating. It runs on 24V and consumes very little power. It has a two-pin connector that plugs into the printer controller. The fan is controlled automatically by the printer system. It is a high-quality brushless hydraulic cooling fan with a 2507 model number.
Note: The image shown may differ from the actual product in terms of the brand name, Voltage/current rating shown.
Features:
- Perfectly fit on the extruder
- Noiseless Performance
- Very low Current consumption
- Easy to install and connect.
- Long Connecting Wire
- Brushless Motor and silent operation
Specification:
- Rated Voltage (V): 12
- Startup Voltage(V):6
- Current Amp(A):0.06
- Speed(RPM):8000
- Air flow (CFM):1.24
- Static Pressure(mmH20):2.115.00
- Noise Level(dB-A):5.0021
- Weight(g):5.00
Package Includes:
1 x 24V 0.06A 2507Cooling Fan
DC24V 2507 Hydraulic Cooling Fan with XH2.54-2P 30CM Cable Overview
The DC24V 2507 Hydraulic Cooling Fan is a compact 25×25×7 mm brushless fan designed specifically for 3D printer extruders. With its built-in hydraulic bearings and 30 cm XH2.54-2P cable, it provides efficient, silent cooling at up to 8,000 RPM to prevent nozzle and hotend overheating.
Key Features of DC24V 2507 Hydraulic Cooling Fan with XH2.54-2P 30CM Cable
- Brushless Hydraulic Bearing: Long service life and smooth rotation without noise.
- Compact Size: 25×25×7 mm profile fits standard extruder mounts.
- Low Power Draw: Startup voltage as low as 6 V, running current just 0.06 A at 24 V.
- High Speed: Up to 8,000 RPM ensures rapid heat dissipation.
- Pre-wired Connector: 30 cm cable terminating in XH2.54-2P for plug-and-play installation.
- Fast Shipping: Genuine units dispatched quickly from Zbotic warehouses across India.
Applications and Use Cases
- Cooling the hotend/extruder assembly on FDM 3D printers.
- Ventilating small CNC spindle motors or stepper driver boards.
- Active cooling for laser module heat sinks in DIY engravers.
- Thermal management in compact industrial controllers and electronics enclosures.
- High-speed airflow for small embedded robotics projects.
How to Use DC24V 2507 Hydraulic Cooling Fan with XH2.54-2P 30CM Cable
Mount the fan directly onto your extruder housing using M3 screws or compatible clip mounts. Plug the XH2.54-2P connector into the 24 V fan output on your printer’s controller board. The firmware will automatically regulate fan speed based on extruder temperature, ensuring consistent cooling performance.
Why Buy from Zbotic?
- Genuine Products: All items sourced from authorized distributors
- Fast Shipping: Orders ship within 24 hours with tracking (non backordered products)
- Free Shipping: Free delivery on qualifying orders
- COD Available: Cash on Delivery, UPI, cards, net banking
- Technical Support: Expert help for setup and troubleshooting
- Easy Returns: Hassle-free replacement for defective products
Frequently Asked Questions
Is this fan compatible with my 24 V printer board?
Yes. The DC24V 2507 fan uses a standard XH2.54-2P two-pin connector and draws 0.06 A at 24 V, making it compatible with most 3D printer mainboards that offer a 24 V fan output.
Can I use this fan on a 12 V system?
This model is optimized for 24 V. Running it at 12 V will reduce speed and airflow dramatically. For 12 V printers, choose a dedicated 12 V equivalent fan.
How do I mount this 25×25 mm fan on my extruder?
Use M3 screws through the four corner holes of the fan frame to secure it to the extruder bracket or heatsink. Ensure the airflow direction arrow points toward the hotend.
Technical Specifications
| Model | DC24V |
|---|---|
| Operating Voltage | 24V |
| Size | 7mm |
| Interface / Protocol | BLE |
| SKU | AI3188 |
| Weight | 0.0078 kg |
| Availability | In Stock |
Applications & Use Cases
The DC24V 2507 Hydraulic Cooling Fan with XH2.54-2P 30CM Cable Size:25*25*7MM is a versatile cooling fans used across a wide range of applications including 3D printer hotend cooling, electronics enclosure ventilation, Raspberry Pi cooling, server rack airflow, and LED heatsink cooling.
Common use cases:
- Replacing a noisy or failed cooling fan
- Adding active cooling to a Raspberry Pi 5
- Part cooling on a 3D printer for better overhangs
This product is ideal for makers, 3D printing enthusiasts, and electronics designers.
Technical Tip: Ball bearing fans last longer than sleeve bearing. Match voltage (5V/12V/24V) and size to your application. CFM rating indicates airflow capacity.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
