Description:
The SIM7600E-H 4G HAT is a 4G/3G/2G communication and GNSS positioning module, which supports
LTE CAT4 up to 150Mbps for downlink data transfer. it is pretty low power consumption. You can connect this 4G module with a computer to surf the Internet or attach it onto Raspberry Pi to enable functions like 4G high-speed connection, wireless communication, making telephone calls, sending SMS, global positioning, etc.
The SIM7600G-H 4G HAT supports telephoto calls and sending SMS by AT Commands using an onboard audio jack.
Based on cloud communication it supports TCP/UDP/FTP/FTPS/HTTP/HTTPS communication protocol.
What’s On Board:
- SIM7600G-H
- CP2102 USB to UART converter
- NAU8810 audio decoder
- TXS0108EPWR voltage translator: translates 3.3V/5V into 1.8V
- MP2128DT power chip
- MP1482 power chip
- Raspberry Pi GPIO header
- SIM7600 control interface: for connecting with host boards like Arduino/STM32
- SIM card slot
supports 1.8V/3V SIM card - TF card slot
allows data storage like files, messages, etc. - 3.5mm earphone/mic jack
- USB interface
for testing AT Commands, getting GPS positioning data, etc. - USB to UART interface
for serial debugging, or log in to Raspberry Pi - MAIN antenna connector
- AUX antenna connector
- GNSS antenna connector
- Power switch
- Network status indicator
- Power indicator
- Operating voltage selection jumper
- UART selection jumper
A: access Raspberry Pi via USB to UART
B: control the SIM7600 by Raspberry Pi
C: control the SIM7600 via USB to UART - PWR configuration jumper
PWR – 3V3: auto startup on power-up (default)
PWR – D6: startup/shut down by the Raspberry Pi D6 pin
Flight mode configuration jumper
NC by default, no flight mode control pin
Flight – D4: flight mode is controlled by the Raspberry Pi D4 pin - USB connector solder pads
- BOOT forced programming solder pads
Note: this is a region-specific module, please check the supported bands before placing an order.
Features:
- Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano
- Supports dial-up, telephone call, SMS, TCP, UDP, DTMF, HTTP, FTP, etc.
- Supports GPS, BeiDou, Glonass, LBS base station positioning
- Onboard USB interface, to test AT Commands, get GPS positioning data, and so on
- Onboard CP2102 USB to UART converter, for serial debugging
- Breakout UART control pins, to connect with host boards like Arduino/STM32
- SIM card slot supports 1.8V/3V SIM card
- TF card slot for storing data like files, messages, etc.
- Onboard audio jack and audio decoder for making a telephone call
- 2x LED indicators, easy to monitor the operating status
- Onboard voltage translator, the operating voltage can be configured to 3.3V or 5V via jumper
- Baudrate: 300bps ~ 4Mbps (default: 115200bps)
- Autobauding baudrate: 9600bps ~ 115200bps
- Control via AT commands (3GPP TS 27.007, 27.005, and V.25TER command set)
- Supports SIM application toolkit: SAT Class 3, GSM 11.14 Release 99, USAT
Package Includes:
- 1 x SIM7600G-H 4G HAT Board
- 1 x 360° foldable LTE Antenna
- 1 x Magnetic base GPS External Antenna (B) with 2-meter cable
- 2 x USB type A plug to Micro plug Cable (Small + Lomg)
- 1 x RPi screws and Standoff pack (2pcs)
- 2 x Antenna connector
Raspberry Pi vs BeagleBone Black: IoT SBC Compared 2026
The single-board computer (SBC) market is crowded in 2026, but two boards have earned a permanent place in...
Read More →
Raspberry Pi Alarm System: PIR, Buzzer and SMS Alert Build
A DIY home security alarm using Raspberry Pi is one of the most practical electronics projects you can...
Read More →
Raspberry Pi AI Kit Setup: Run Local AI Models on Pi 5
The Raspberry Pi 5 AI Kit represents a landmark moment for affordable edge computing in India. Announced in...
Read More →Technical Specifications
| Brand | WAVESHARE |
|---|---|
| Model | SIM7600G-H |
| Interface / Protocol | 4G, LTE |
| SKU | AI1549 |
| Weight | 0.32 kg |
| Availability | Out of Stock |
Applications & Use Cases
The Waveshare SIM7600G-H 4G HAT For Raspberry Pi, LTE Cat-4 4G / 3G / 2G Support is a versatile raspberry pi hats used across a wide range of applications including electronics projects, DIY builds, prototyping, and educational experiments.
Common use cases:
- Integrating into a custom electronics project
- Learning and experimenting with circuits
- Replacing or upgrading components in existing setups
This product is ideal for electronics enthusiasts, engineers, and students.
Technical Tip: Always verify voltage and current requirements before connecting to your circuit. Check datasheets for detailed specifications and pin configurations.
Shipping & Delivery
- Free shipping on orders above ₹999 across India
- Dispatched within 1-3 business days
- Expected delivery: 3-7 business days depending on location
- Secure packaging to ensure safe transit of electronic components
- Genuine WAVESHARE product sourced from authorized channels
Ashish Vohra –
Love this Waveshare SIM7600G-H 4G HAT For Raspberry! Running Python scripts 24/7 without any issues for months now.
Kartik Saini (verified owner) –
Good Waveshare SIM7600G-H 4G HAT For Raspberry. Runs well but gets warm under load. Added a fan and it’s perfect now.
Swati Rao –
Superb quality Waveshare SIM7600G-H 4G HAT For Raspberry. Genuine product, fast delivery. Using it for a media center.
Raj Panchal –
This Waveshare SIM7600G-H 4G HAT For Raspberry is perfect for my IoT gateway project. Handles everything smoothly.
Daksh Panchal –
Amazing Waveshare SIM7600G-H 4G HAT For Raspberry. Set up Retro Pi and it works like a charm. Great purchase!
Nakul Rathore (verified owner) –
Outstanding! This Waveshare SIM7600G-H 4G HAT For Raspberry powers my home automation hub. Zbotic delivers genuine products.
Tarun Menon (verified owner) –
Decent Waveshare SIM7600G-H 4G HAT For Raspberry. Setting up was straightforward. Good for the price.
Hemant Bhandari (verified owner) –
Good Waveshare SIM7600G-H 4G HAT For Raspberry. Runs well but gets warm under load. Added a fan and it’s perfect now.
Harsh Sen (verified owner) –
Amazing Waveshare SIM7600G-H 4G HAT For Raspberry. Set up Retro Pi and it works like a charm. Great purchase!
Ishaan Verma (verified owner) –
This Waveshare SIM7600G-H 4G HAT For Raspberry is ideal for learning Linux and programming. Bought for my son, he loves it!
Neeraj Deshpande (verified owner) –
Decent Waveshare SIM7600G-H 4G HAT For Raspberry. Setting up was straightforward. Good for the price.
Harsh Kumar (verified owner) –
Fantastic Waveshare SIM7600G-H 4G HAT For Raspberry. My smart mirror project is running beautifully on this.
Nitin Luthra –
Good Waveshare SIM7600G-H 4G HAT For Raspberry. Runs well but gets warm under load. Added a fan and it’s perfect now.
Yashwant Bajaj (verified owner) –
Perfect Waveshare SIM7600G-H 4G HAT For Raspberry for my machine learning project. Great performance for the size.
Siddharth Saxena (verified owner) –
Fantastic Waveshare SIM7600G-H 4G HAT For Raspberry. My smart mirror project is running beautifully on this.
Kiara Bajaj (verified owner) –
Perfect Waveshare SIM7600G-H 4G HAT For Raspberry for my machine learning project. Great performance for the size.