Beitian Dual BN-220 GPS GLONASS Antenna Module TTL Level RC Drone
Beitian Dual BN-220 GPS GLONASS Antenna Module TTL Level RC Drone. This BN-220 GPS Module can show your speed. When you use it for Raspberry Pi, there is no driver needed. The data output when the TX LED flashing in blue; PPS LED not bright when GPS not fixed, flashing in red when fixed
Module Pin
1. GND, grounded
2. TX, data module output
3. RX, data entry module
4. VCC, power supply module, 2.8V-6.0V
Specification:
Electrical Characteristics | Chipset: 8030-KT Receiving Format: GPS,GLONASS,Galileo,BeiDou,QZSS and SBAS Frequency: GPS L1,GLONASS L1,BeiDou B1,SBAS L1,Galileo E1 Channels: 72 Searching Channel |
---|---|
Sensitivity | Tracking: -167dBm Reacquisition: -160dBm Cold start: -148dBm Hot start: -156dBm |
Accuracy | Position Horizontal: 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky) Velocity: 0.1m/sec 95% (SA off) Timing: 1us synchronized to GPS time |
Acquisition Time | Cold start: 26s Warm start: 25s Hot start: 1s |
Data and Update Rate | Support Rate: 4800bps to 921600bps,Default 9600bps Data Level: TTL or RS-232,Default TTL level Data Protocol: NMEA-0183 or UBX, Default NMEA-0183 Single GNSS: 1Hz-18Hz Concurrent GNSS: 1Hz-10Hz,Default 1Hz |
Operational Limits | Altitude: 50,000m Max Velocity: 515m/s Max Acceleration: Less than 4g |
Power consumption | VCC: DC Voltage 3.0V-5.5V,Typical: 5.0V Current: Capture 50mA/5.0V Operating temp: -40 °C ~ +85°C Storage Temp: -40°C ~ +105°C |
Connector | 1.00mm spacing between the 4pins patch seat |
Indicator | TX LED: blue. The data output, TX LED flashing PPS LED: red.PPS LED not bright when GPS not fixed, flashing when fixed |
Wiring | GND,TX output,RX input,VCC(3.0v-5.5v) |
Dimensions (mm) | 22 x 20 x 6 |
Weight (gm) | 5.3 |
Package Includes:
1 x Beitian Dual BN-220 GPS GLONASS Antenna Module TTL Level RC Drone
Reviews
There are no reviews yet.