Showing 1–12 of 37 results

Show sidebar

1.3 Inch 128×64 OLED Display Screen Module with SPI Serial Interface – V2

  • Driver IC: SSD1306
  • Resolution: 128 x 64
  • Visual Angle: >160°
  • Input Voltage: 3.3V ~ 6V
  • Pixel Color: Blue

150W DC-DC Step-Up Boost Converter 10-32V to 12-35V 6A Adjustable Power Supply Module

  • Input voltage :10-32V
  • Output voltage: 12-35V (adjustable)
  • Output Current: 10A (MAX)
  • Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
  • The non-isolated step-up power conversion module
  • Onboard LED illuminates when the voltage is applied to the module
  • Equips Multi-turn Potentiometer.

4×4 Matrix Keypad Membrane Switch

121.00 98.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • Features :

    1. Ultra-thin design & adhesive backing provides easy integration to any project
    2. Excellent price-performance ratio
    3. Easy communication with any microcontroller
    4. 5 pins 2.54mm pitch connector, 4x 4type 16 keys.
    5. Sticker can peel off for adhesive mounting.
    6. Used widely in industrial and home electronic equipment's, instrument, etc.
    7. This allows a microcontroller to ‘scan’ the 8 output pins to see which of the 16 buttons is being pressed.

5V 1 Channel Relay Module

86.00 56.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • 5 V relay can be used for home automation configured with micro-controller
  • This module compiles with international safety standards
  • High voltage handling capacity of 220v ac with full protection
  • Led indication of relay functioning
  • colour: Blue and weight: 10 gms

5V 2 Channel Relay Module

193.00 93.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • The module using Songle relay control.
  • AC voltage 250V, AC current 10A, maximum DC voltage 30V DC current maximum 10A.
  • Power indicator (green), Two ways of relay status indicator light (red).
  • Using 8550 transistor-driven, strong driving ability.
  • Has the fixed bolt hole and easy installation.

5V 4 Channel Relay Module

252.00 163.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • 5V 4-Channel Relay interface board and each one needs 15-20mA Driver Current.
  • Equipped with high-current relay, AC250V 10A; DC30V 10A.
  • Standard interface that can be controlled directly by microcontroller (for Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
  • Indication LED’s for Relay output status.

5V 8 Channel Relay Module

553.00 308.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • The 8550 transistor drive, driveability.
  • A fixed bolt holes for easy installation.
  • It has a relay status indicator led Power LED(Green), 8 relay status indicator LED(Red)
  • Relay control interface by single-chip IO.
  • Low-level suction close, high-level release.
  • Easy to use, simple 3 line structure.

6-30V 1-Channel Power Relay Module with Adjustable Timing Cycle

360.00 236.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • Operating voltage: 6-30V
  • Time interval:0.1 s (minimum) ~ 999 min (maximum) continuously adjustable.
  • Trigger Signal Source: High-Level Trigger (3.0 V-24 V)
  • Output Capacity: can control no more than DC 30V 5A AC or 220 V devices 5A
  • Optocoupler Isolation.

DC MOTOR SPEED ​​CONTROLLER 5V-25V 5A SPEED ​​CONTROL SWITCH

  • Working voltage: DC4.5V-25V
  • Output: 0-5A 90W
  • PWM duty cycle: 1% -100%
  • PWM frequency: 20KHz
  • Size: 30.5 * 26.5 * 13.5mm

DC-DC 12V to 3.3V 5V 12V Power Module Multi Output Voltage Conversion

  • Input Voltage: 12V
  • Connector: 5.5mm DC Jack
  • Output power on/off switch
  • Two-row multiple pin outputs, easy to use and connect

E-DIMMER AC 50-220V 2000W

253.00 139.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • Working voltage : 5V(DC)
  • Static current: Less than 2mA.
  • Output signal: Electric frequency signal, high level 5V, low level 0V.
  • Sensor angle: Not more than 15 degrees.
  • Detection distance: 2cm~450cm.

ESP-01 Adapter 3.3V 5V Board

  • On-board level shift circuit
  • Arduino UNO R3 and the compatible board can directly connect to this module;
  • Interface logic voltage: 3.3V / 5V compatible(On-board level shift circuit);
  • Working voltage: 4.5~5.5V (Onboard 3.3V LDO Regulator);
  • Working current: 240mA(MAX).