Showing all 11 results

Show sidebar

37 in 1 sensor kit compatible with Arduino

2,620.00 1,179.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • For beginners who are interested in Arduino
  • A complete set of Arduino’s most common and useful electronic components
  • Infrared sensor receiving module
  • Laser sensor module .
  • Temperature and humidity sensor module.
  • Infrared sensor module.
  • 5v relay module.
  • Obstacle avoidance sensor module.

Arduino Mega 2560 R3 Board

1,797.77 809.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • 54 digital input / output terminals (14 of which have programmable PWM outputs).
  • 16 analog inputs.
  • 4 UARTs (hardware serial ports).
  • 16 MHz crystal clock.
  • Operating voltage: 6 ~ 12v.
  • Dimensions: 110 x 53 x 15 mm.

Arduino Nano CH340 Chip Compatible with Arduino (Soldered)

451.00 239.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • Operating Voltage (logic level): 5V
  • 8 analog inputs ports: A0 ~ A7
  • 14 Digital input / output ports: TX, RX, D2 ~ D13
  • 1 pair of TTL level serial transceiver ports RX / TX
  • Using Atmel Atmega328P-AU MCU
  • There is a bootloader installed in it
  • Standard 0.1” spacing DIP (breadboard friendly).
  • Manual reset switch.

Arduino UNO R3 Atmega16U2

695.00 375.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • 14 digital input/output pins,
  • 6 analogue inputs,
  • 16 MHz crystal oscillator,
  • USB connection,
  • power jack,
  • ICSP header

Arduino Uno R3 CH340G ATMega328P

462.00 238.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • Microcontroller ATmega328 (SMD) – Interface CH340G
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limits): 5-20V
  • Digital I / O Pins 14 (of which 6 provide PWM output)
  • Analog Input Pins: 6

CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board

  • Latest Arduino CNC Shield Version 3.10
  • GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
  • Coolant enable
  • Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
  • Compact design.
  • 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
  • 2 x End stops for each axis (6 in total)

MEGA 2560 R3 Improved Version CH340G Board

1,321.00 854.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • Microcontroller CH340
  • Operating Voltage 5V
  • Input Voltage (recommended) 7-12V
  • Input Voltage (limits) 6-20V
  • Digital I/O Pins 54 (of which 15 provide PWM output)
  • Analog Input Pins 16
  • DC Current per I/O Pin 40 mA
  • Dimensions : 111 x 54 x 12 (LxWxH) mm.

Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino UNO R3

145.00 93.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
For Arduino UNO R3 Development Board only. With screw copper pillar and installation instructions. To protect your little computer against damages, dust and scratches Clear Top and Bottom. This case provides easy access to all ports. It requires no tools for easy assembly and disassembly. Simply Clicks Together Enclosure.

TXS0108E High Speed Full Duplex 8 Channel Logic Level Converter

165.00 106.20 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • VCCA Voltage level: 1.2V-3.6V
  • VCCB Voltage level: 1.65V-5.5V
  • It can provide 3.3-5V, 1.8-3.3V level conversion
  • Dimension Approx: 26 x 15 mm
  • PCB Color: Blue
  • 8-bit bi-directional 3.3V-5V/5V-
  • 3.3V logic level converter board
  • Serial communication interface compatible with UART/IIC/SPI port easily to connect
  • Uno R3 Beginners Kit for Arduino Uno- SECONDRY KIT

    2,439.00 1,658.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
    • Great for Starting with Arduino Programming
    • Variety of components are included in this pack to try out different projects.
    • The kit comes with quality components assured .
    • All-in-one kit, a great starter kit for learning coding.
    • Microcontroller ATmega328 (SMD) – Interface CH340G
    • Operating Voltage: 5V
    • Input Voltage (recommended): 7-12V
    • Input Voltage (limits): 5-20V
    • Digital I / O Pins 14 (of which 6 provide PWM output)
    • Analog Input Pins: 6

    UNO R3 Super Starter Kit

    3,593.00 2,479.00 Inclusive of 18% GST, GST Credit Available. Free Shipping on orders above 999
  • Comes with a detailed and user-friendly tutorial: Free PDF tutorial with more than 22 lessons available for download
  • A great way for the beginners to get started with Arduino programming
  • All modules are ready to use, no soldering needed